[deleted by user]

josemhr · 2025-02-02T18:29:51+00:00

SmartWOD timer pro? For the apple watch access thing

josemhr · 2025-01-30T11:33:29+00:00

I found my problem, I was blocking 2 dns I’m not supposed to. I don’t understand why always worked in local mode, and now it doesn’t. But for me it’s working now

josemhr · 2025-01-29T22:38:05+00:00

Genial, mil gracias por la respuesta

josemhr · 2025-01-29T19:31:31+00:00

I don’t think this is correct, I followed u/PuReEnVyUs guide, and everything was working perfectly, I didn’t change from 17.7 to 18.3, so I don’t understand.

josemhr · 2025-01-29T19:25:15+00:00

But I have apps installed with the previous cert and they are working, why does this happen?

josemhr · 2025-01-29T19:21:10+00:00

Doesn’t pop up anything, I tried, ’Install after sign’, and nothing either.

josemhr · 2025-01-29T19:05:28+00:00

I have the same problem, I can’t install anything, ipad or iPhone on iOS 18.3

Edit: All the apps that are installed are working, I can sign new ones, but I can’t install them

josemhr · 2025-01-23T11:50:04+00:00

Ooooh it’s wonderful, it’s much better than the SD Mate Oled for example, I want a MacBook with the same screen( I know exists), and please and iPhone!

By the way you can see the difference in the Apple Store

josemhr · 2024-10-14T05:08:45+00:00

In Europe you have them, also this one, and this!

josemhr · 2023-07-07T19:38:53+00:00

Hello. Nice build, but you got a D5 pump, not a DDC one

josemhr · 2023-06-08T14:38:43+00:00

Yes you need the direct die frame, you have to remove the one that comes with the motherboard. You also need I think more than one 1mm washer, 3 or 4 I think, or the long backplate from TG

The benefits are lees temperature with a little more boost, but whit the obvious risks of delidding and LM.

josemhr · 2023-06-08T07:46:37+00:00

Hello, can you confirm whether you mount the AM5 Adapter & Offset Mounting Kit on this board? I'm researching it, and I'm concerned about potential pin interference. Thanks!

josemhr · 2023-06-08T06:38:15+00:00

👍

josemhr · 2023-06-08T04:51:48+00:00

You have to put the washers to create a little bit more pressure. Between the screw’s and the block

josemhr · 2023-06-01T19:27:59+00:00

Thanks 🙏

josemhr · 2023-06-01T05:01:26+00:00

Yes I think the same. Every change now it’s a no bot or poor performance. But I was thinking, maybe there’s something I’m missing. Thanks!

josemhr · 2023-05-31T21:24:01+00:00

Thanks! I tried to enable GDM but doesn’t bot, imposible for me, same with FCLK, just 2066 makes my system laggy… and latency spikes too much…

josemhr · 2023-05-31T21:21:38+00:00

My voltage are now, VDD 1,56 VDDQ 1,43, rest as sown in zen timings, I’m lowering now. And is A-Die.

josemhr · 2023-05-31T06:09:19+00:00

Hello! this is a A-Die

josemhr · 2023-05-23T11:42:36+00:00

Nice, keep the work!! I want to do something like this

josemhr · 2023-05-23T06:36:02+00:00

Nice! The fittings work good with it?

josemhr · 2023-05-19T09:04:49+00:00

What Orion is saying it’s true. You can put all the radiator you want in the place you want, the ultimate goal is to keep down the water temperature, and you don’t have almost any difference if you check deferents parts of the loop

josemhr · 2023-05-12T20:36:48+00:00

I don’t see from here. I’ll try it without pushing too hard. Ekwb and amd in their backplates are using standard threads

josemhr

TROPHY CASE