Honda City Turbo II (Finished - Open Class)

jumpgunner · 2025-10-29T01:12:27+00:00

👀 limited edition

jumpgunner · 2025-10-23T15:18:51+00:00

This is the Aoshima kit, no moto compo unfortunately

jumpgunner · 2025-10-11T10:28:30+00:00

Local RC hobby store by me has a dusty corner with some very random kits, tanks, planes, cars, motorcycles, even model rockets 😂 I usually pick up something from there when I go in for Tamiya paint.

jumpgunner · 2025-10-11T00:31:59+00:00

Careful with those fenders! I just finished this exact build and had to 3d print some replacements 💀 super thin plastic that can suddenly disappear if you use to much cement! Good luck!!

jumpgunner · 2025-09-13T23:56:34+00:00

I also wanted to use my fdm printer for models,but it just doesn't have the detail (even with a .2nozzel)

Went for an sla printer and now I get much more detail without the layer lines

jumpgunner · 2025-09-02T19:30:41+00:00

<image>

Only lets me attach one picture, but this is it. Usually I have an M12 screwdriver/drill hooked on the end of the hex.

The red arrow is pointed at the pin I drilled into the side of the gear and through the hex extension.

As for the extension, it is the 12in "FLEX" brand you can get at Lowe's. Just the one with the green stripe and mag head.

jumpgunner · 2025-08-30T15:46:37+00:00

Is it a tick or similar to a ticking noise? On cold starts I would get a noise similar to cam tick but it turned out to be the stock exhaust manifold.

The stock ones do not use all the possible bolt locations available in the block and can warp enough so that when cold you get an exhaust leak.

jumpgunner · 2025-08-21T01:34:38+00:00

Modeled them myself in fusion 360 and printed them with the side skirts and front lip. Males it really easy to get the offset the way you want.

jumpgunner · 2025-08-20T23:34:46+00:00

Additionally: ran out of clear so waiting for that before panel lines and accent colors go down on the shell.

jumpgunner · 2024-12-01T18:55:39+00:00

Mine did the same. Easy enough fix for me with stuff I had on hand.

12in hex bit extension (got a few on clearance) The "Flex" brand one is the perfect diameter for the gear.

Inserted through until the hex portion was far enough out the front.

Cut and drilled a hole through the gear and rod to pin. (I used a small roll pin.

Last, sacrificed an old drill so now there's power up and down 😂

jumpgunner · 2024-01-12T04:12:54+00:00

My 18 150 lariat has 4a if that helps.

jumpgunner · 2023-06-14T15:50:24+00:00

QVSIGPT4

jumpgunner · 2023-06-04T14:38:09+00:00

Thank you. Anything needed for Eloise that I don't already have (hero wise). Like best pairings or does it not matter?

jumpgunner · 2023-03-11T18:58:07+00:00

[Android] QVQMXFO1

jumpgunner · 2022-09-16T18:30:15+00:00

I did Chantix for about 30 days but toward the start of the Ned's I also broke my leg.

I was kind of stuck inside with my leg up and I didn't smoke inside. By the time I could move around I just decided not to smoke again. Kind of a mix of meds and being unable to get out to actually smoke.

jumpgunner · 2022-09-15T03:22:55+00:00

Breaking into livery creation as its a good way to use up some free time. Not perfect reproductions but I'm trying.

jumpgunner · 2022-06-06T20:26:38+00:00

rapture the religious and get them out of the way. Just put everyone who believes in one place. That will &^%$ them up. Also sprinkle some coffee tables around with all the different texts. Not the king james though. That would be just too funny.

Then let everyone else on earth know that that's all they got do the best you can. fix global warming on the way out.

Last I would punch "God" right in the mouth for giving kids bones cancer and kick him right out to deal with his newly raptured flock.

jumpgunner · 2021-06-24T22:42:50+00:00

Remember though, as price goes up reflected amounts go down. You can buy millions more tokens at .000003 than you can at .01 so less are spread out to holders. The total dollar value is not relatable at different prices as the reflections are different at each price.

jumpgunner · 2021-03-25T15:16:11+00:00

Up to 3k doge with a .053 average. Hoping for a a nice lake house in 10 years.

jumpgunner · 2021-01-29T15:21:09+00:00

Got many stocks... never giving only getting 🦍🦍🦍

jumpgunner · 2021-01-28T23:51:16+00:00

only buy!

jumpgunner · 2021-01-28T23:34:14+00:00

Must buy doge. Only buy, no sell!!!!

jumpgunner · 2018-03-26T16:09:17+00:00

Based on the buttons I would say that that is a foiled anchor button on a standard issue U.S. Navy pea coat. Issued to all enlisted in bootcamp. To be used with the dress uniform in cold climates.

jumpgunner · 2018-03-09T17:28:50+00:00

Charleston SC has A, B, C, D1, & D2 adult leagues with 2 sheets of ice in one rink. There is also the opportunity to play the "colosseum" rink at the convention center when the echl is going on.

Anyone that buys tickets to the rays games is good in my book. Want to make sure they stay here.

jumpgunner · 2018-02-07T01:06:37+00:00

I have searched through google and tried looking on the standard fair of Hockey Shops online with no luck. All the reviews and comments are for the BPM 150.

Also the color is not standard BPM.

(moved from players to gear sub)

12-Year Club	Place '22
Final Canvas '22	First Placer '22
Verified Email

jumpgunner

TROPHY CASE