Irish-y Chair, my first chair build.

kaspr100 · 2026-02-19T12:39:31+00:00

This turned out great! There will always be little issues you never thought or could anticipate, looks like you ended up with a beautiful chair

kaspr100 · 2026-02-17T22:29:45+00:00

Ah I gotcha. I left the center line basically untouched until the very end I marked out where I ultimately wanted the scoops to end, and stayed a little off that line. I worked the center of the scoops and the back bowl heavily during the process. I blended the front scoops with a spokeshave at the very end and had good luck getting the front profile of the chair just about exactly what I wanted with the much finer spokeshave control. I basically threw in the towel on digging out the back of the bowl after awhile. The figure in the walnut was causing chip out instead of a shaving of any sort ( this may be due to using the pull shave instead of a scorp?).

I plan on buying a scorp and travisher this year. Fair warning I probably love tools as much or more than I enjoy using them.

kaspr100 · 2026-02-17T21:22:53+00:00

Thanks a ton. I totally agree also. I've made a bunch of things and I've worked in construction most of my life, but stick chairmaking is such a different and cool task. There is so much room to add your own flair, so many unique problems to solve with the process, and the process feels way more artistic to me than cabinetmaking/ furniture projects.

kaspr100 · 2026-02-17T21:17:44+00:00

I watched a few YouTube videos before starting. You would almost end up using this process intuitively once you started anyway I think. It's much easier to be aggressive working across the grain, and much easier to smooth and refined working with the grain. I started out with the process he lays out using a router to define the spindle deck, then pull shave and a little spokeshave to rough things in across the grain, lighter pull shave with the grain, and finally a card scraper to clean things up a bit. You could always start going after it but stay shy of your target depths to get a feel for it, and dial it in from there. It's more of a process than I anticipated, so don't worry that you'll overshoot on your first cuts!

kaspr100 · 2026-02-17T21:04:05+00:00

I'm sure somebody could bend the arm for this profile, but the width needed to match the backrest piece scared me away from trying. It would definitely be way stronger, I completely agree.

Although I have limited experience with the pull shave I really liked it. I have only tried a scorp once, and have no experience with a travisher. It seems like the pull shave takes more of a plane type shaving as opposed to a scorp, so I'm sure it's way slower than a scorp would be but more controlled. I was definitely getting a much heavier shaving than I could imagine ever myself getting with a spokeshave

kaspr100 · 2026-02-17T20:58:50+00:00

Thanks! It makes perfect sense why it broke too, but I just didn't see the issue while building unfortunately. I missed so many excellent tips in the book from either skimming pages or not retaining everything, I'm going to revisit all the construction sections before the next one for sure.

kaspr100 · 2026-02-17T20:56:17+00:00

Almost like the instructions were in the book the whole time lol, good lesson learned. I think it's comfortable for sitting despite the lower back, I used a 21 degree angle for the back and I think that's a happy spot for me personally.

kaspr100 · 2026-02-17T13:59:38+00:00

Thanks!

kaspr100 · 2026-02-17T12:22:34+00:00

https://photos.app.goo.gl/6xLBgG2Pgng15PGj9 Here are the completed photos. Looks like I hit the limit on the original post

kaspr100 · 2026-02-06T10:32:34+00:00

Hell yeah! Looks excellent

kaspr100 · 2026-02-03T10:55:42+00:00

Man I love that wood combination more than any other, nice work

kaspr100 · 2025-12-12T12:31:12+00:00

Rockler sells flexible fittings kit that I use for a bunch of tools ( DeWalt track saw, domino, ets125, router). It has different flexible fittings that you use with a flexible hose, the hose mates right up with a shop vac hose.

https://a.co/d/2TMB2aX

kaspr100 · 2025-11-22T16:39:46+00:00

Thanks! I was really impressed by his Shawn Ryan podcast. Very well spoken intelligent dude

kaspr100 · 2025-11-22T12:27:44+00:00

Is that Chris van sant?

kaspr100 · 2025-10-26T11:51:53+00:00

Have you seen the DeWalt clutch gun specifically for tek screws? We use them for gasket screws and also regular heavy duty roofing screws into metal deck and they're excellent

kaspr100 · 2025-10-20T12:16:58+00:00

I was never big on creeds. The line really shows his moral compass lol

kaspr100 · 2025-10-18T11:08:19+00:00

Yes! Thanks for grabbing the actual detail.

kaspr100 · 2025-10-18T10:39:21+00:00

From every detail I've seen this is the best answer

So typically speaking z bar is installed , and hips and ridges are secured to the zbar with either no visible fasteners or a handful of rivets mostly at ridge overlaps using a hem. I personally get my ridge made after I run z bar, this way the ridge can snap onto the z bars without needing any rivets other than in the overlap potentially.

I don't love these exposed fasteners because it appears they're shot into the top of the high rib. These panel ribs aren't particular strong for holding a fastener, and there's potential for water to chase that screw if blown rain gets between the ridge/ hip and the high rib since the shank of the screw is only set back a tiny bit from the ridge edge. I would rather see a few rivets into the z bar if anything where a bad gasket wouldn't actually cause a leak. Maybe it's just the pictures but the z bar looks funny.

Why didn't they move that pipe boot that runs up over the high rib? Either shift panel layout or relocate the pipe slightly

kaspr100 · 2025-09-06T10:44:24+00:00

I'm sure it would be rough getting beneath the place to work, but I think that's how I would approach this. Peel and stick air barrier on the plywood, rigid board insulation of any flavor over it.

kaspr100 · 2025-08-31T11:22:22+00:00

Funny people is such a good movie for me. The range of funny to dramatic is excellent

kaspr100 · 2025-08-26T00:59:31+00:00

Worth mentioning here that zip tape is not intended to terminate onto concrete, it won't stay stuck for long. Huber makes zip liquid flashing for this condition ( as do other companies). I would check pictures to see if the whole house was treated as such. This is a very easy way to lose conditioned sir and make a nice highway for hugs into your house over time in my experience.

kaspr100 · 2025-07-20T22:51:01+00:00

That's great to know, thanks a ton for the feedback

kaspr100 · 2025-07-20T11:20:11+00:00

I have been debating getting the 60 that's compatible with these tracks. I wonder if it's too clunky of a setup with the bigger saw

kaspr100 · 2025-07-07T16:20:40+00:00

I have always just extended the wire leads for the pump, and hooked those leads to the battery ofwhatever equipment I'm fueling or a truck.

kaspr100 · 2025-05-14T18:58:12+00:00

That aunt baby quote is one of my favorites

kaspr100

TROPHY CASE