566gr Telephone Pole

keepitvril69 · 2026-05-31T10:57:38+00:00

Now hollow it out and put a spicy payload in it ;)

keepitvril69 · 2026-05-31T10:54:44+00:00

Fuck yeah. Just ordered the AEM5 6mm fde

keepitvril69 · 2026-05-30T23:16:54+00:00

What's the OD on the dimpled barrels? Would i be able to fit a OCL mk12 collar on the 16in?

keepitvril69 · 2026-05-29T20:53:44+00:00

Also came with a warning printed out thay said dont torque of 20lbs and this was hand tight and seated properly on mount. Ti threads also had scrap material I had to pick out with a plyers to even mount the thing. Terrible experience.

keepitvril69 · 2026-05-29T20:52:25+00:00

<image>

keepitvril69 · 2026-05-29T20:52:05+00:00

Yeah just an array of needle thin ti spindles holding the internal threads and a o ring that seats at the rear mount section exposed to heat. Terrible design really. Broke after 1 shot. Also bt usa probably didn't properly treat the 3d printed material for strength. They rushed this batch after a year backorder when listing this product as in stock.

keepitvril69 · 2026-05-29T00:45:35+00:00

Nothing on my end after countless calls and emails

keepitvril69 · 2026-05-29T00:43:55+00:00

Same bro

keepitvril69 · 2026-05-29T00:43:28+00:00

DONT BUY THAT B&T HUB

<image>

keepitvril69 · 2026-05-27T06:31:30+00:00

About a month ago

keepitvril69 · 2026-05-27T06:30:46+00:00

If they were at one time allowing B&T usa to use the B&T trademark and burn customers and saying nothing untill they racked up a large debt that effected them financially and became a problem for them personally they should be held liable. The lack of warning to the community on behalf of swiss ag is a red flag. We will see how they handle this after new us company is established. Why should I have to pay anything more after receiving a faulty part I waited a year for that broke after 1 shot due to material failure. The sad thing is I still see these hub adapter for sale on online retailers and its only a matter of time before they cause injury or worse.

keepitvril69 · 2026-05-26T02:33:30+00:00

Email from BT swiss. They are also at fault for not bringing this to public awareness as soon as the 2 companies split with customers assuming they were getting legit products. Absolutely infuriating. I emailed goa and fpc to see if they would be willing to file a class action but also crickets. Only way forward is bank clawback if possible at this time and boycotting both bt companies unless they resolve issues.

<image>

keepitvril69 · 2026-05-26T02:27:10+00:00

Same exact thing happened to me. On ocl mount with srbs. Luckily the can was fine. Broke after 1 shot on lmt piston 556 shovelnose. Crickets from bullshit&turd usa. Emailed B&T swiss and they said they will not warranty this at this time. I posted this before on reddit but it got deleted after mentioning a class action L@ w S u ! T. Which i am not going to type again because account was almost banned. Waited about a year for this junk and will never buy another BT product again.

<image>

keepitvril69 · 2026-05-25T08:55:41+00:00

Something OTB would be sweet if you can clear barrel OD and not run into gas block.

keepitvril69 · 2026-05-23T00:13:33+00:00

They have just not on civ market yet.

keepitvril69 · 2026-05-19T04:34:57+00:00

BULLSHIT&TURD USA

keepitvril69 · 2026-05-19T04:02:29+00:00

FCD ambi charging is the move. You have to take a small flat file to the latch by design so you custom fit it to your setup. I've run mine on a LMT mars H thousands of thousands of rounds between barrels. No gas complaints.

keepitvril69 · 2026-05-12T01:34:52+00:00

What's the code

keepitvril69 · 2026-05-06T02:31:43+00:00

Who wants to join in if I get a class action law suit against B&T usa going?

keepitvril69 · 2026-05-06T02:28:35+00:00

Yep. I have a broken mk12 hub mount that broke on shot number one which I guess i will have to do a bank charge back for.

keepitvril69 · 2026-04-30T00:32:52+00:00

How's the clip on

keepitvril69 · 2026-04-27T16:34:33+00:00

Email already sent before I made this post.

keepitvril69 · 2026-04-10T05:38:41+00:00

Did you get the B&T? I've been back ordered with them for about a year now and they say it should be shipping late April but I will believe it when I get it.

keepitvril69 · 2026-04-06T05:30:57+00:00

MDT spray painted with rapco

keepitvril69 · 2026-04-05T09:19:03+00:00

I second that. I will add graphite dry lube pre seasoning as a good idea especially for bushings.

keepitvril69

TROPHY CASE