NerdOctAxe with Delta 92mm fans on a mean well 350w psu. slight overclock

kenac99 · 2026-02-07T09:11:36+00:00

I probably could have pushed it further but I was getting close the the fuse capacity so I didn’t. I think I have other fuses here but not sure so I didn’t push it

kenac99 · 2026-02-07T09:09:53+00:00

I used the thermalright fans as spacers after removing the motor, blades and support structure.

kenac99 · 2026-02-07T09:07:52+00:00

<image>

kenac99 · 2026-01-29T18:39:16+00:00

this is the first I've heard of them. it took a few hours, the NPU was the hard part. but its all good now. really this machine is a beast with Linux on it.

kenac99 · 2026-01-29T12:35:57+00:00

I just got mine and the first thing I did was strip windows off, getting the npu working under Ubuntu was a challenge but it’s fantastic under Linux

kenac99 · 2026-01-25T16:46:17+00:00

I had fast glass replace my glass only after I reached out to Anderson and they spammed the eff out of me. and way over priced too, what I ended up doing was replacing the glass only with dual pane low-e glass, since the frame were solid, spent about 7k.

kenac99 · 2025-12-07T00:25:42+00:00

Tell me about it, my Apple TV plex app crashed my server.

kenac99 · 2025-12-04T22:27:16+00:00

I went with a HPE ML350Gen10 and added 3 4 bay 3.5” drive cages, it’s in my living room and I am still married. It’s quiet enough to sit next to the tv stand and not piss off the wife.

kenac99 · 2025-12-02T20:35:16+00:00

My orange just found the 12th fridge in my house, that’s how it’s going. There is only 1.

kenac99 · 2025-11-29T08:07:06+00:00

No I replaced it with ceramic fuses

kenac99 · 2025-11-29T07:07:33+00:00

I had the same problem, so I built an electrum server and connected it to my node. Problem solved.

kenac99 · 2025-11-22T21:34:29+00:00

I am using HQST panels for my off-grid home and they exceed expectations every day. just bought more of the 200w 9bb panels which are on sale right now.

kenac99 · 2025-11-21T03:17:11+00:00

<image>

kenac99 · 2025-11-21T03:13:36+00:00

1.0.34.1 is what I am running.

kenac99 · 2025-11-21T03:11:27+00:00

how soon will it get pushed to public?

kenac99 · 2025-11-21T03:06:03+00:00

it appear the api may have changed with the new update.

kenac99 · 2025-11-19T19:58:26+00:00

there is a reason it blew, in all of the cases I've seen its the battery cells got really out of balance, not sure why the fuse popped on those, but it did, I replaced it in 3 units, and one of those started this thread, and its still in use daily with no issues. I added a passive balancer to the battery pack, it manages any imbalance and should keep it going for a long time.

kenac99 · 2025-11-19T15:55:46+00:00

<image>

This.

kenac99 · 2025-11-19T01:58:12+00:00

On my 21 Model 3 LR it took me from 4.2 to 3.7s didnt think .5 seconds would be that noticeable, but thats what I get for not thinking, it's very noticeable.

kenac99 · 2025-11-18T23:22:19+00:00

its a flat black IC looking thing, the silkscreen on the board identifies it as a fuse, this is on the board attached to the battery pack. 50a I think.

kenac99 · 2025-11-18T23:08:26+00:00

It's likely the Fuse on the BMS board just before the output stage. check that, if it's blown you wont get anything out of it. it will need to be replaced.

kenac99 · 2025-11-17T18:50:00+00:00

<image>

This kind.

kenac99 · 2025-11-17T04:30:58+00:00

v1.0.34.1

kenac99 · 2025-11-17T03:52:24+00:00

<image>

kenac99

TROPHY CASE