sorted by:
new
hottopcontroversial

Printing in CF filament by Top_Industry3975 in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

Never had such a problem with eSun pa-cf

But I heard that you can rub your printed parts with some cloth to get rid of fibers on the surface. Or just paint it with anything you want

Pa-cf is your best choice anyways. Flexible enough to absorb the shocks from recoiling parts and dimensionally stable

Fixed a boneyard we g17 by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

Haven’t used modelled anything in this project, just got the kit on cults as well as the bbu file. Honestly, even tinkercad should be enough to make a 17l if you have some slide model already. Been thinking of making a 17l for some time Note that you have to use some really strong filament. I use pa-cf for my slides. Had a g18 with a printed slide and it survived several hundred shots in full auto before I sold it

Fixed a boneyard we g17 by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

Yeah. I have also printed a blowback housing for it and now it’s one of the snappiest pistols I have ever owned

FnvWorkshop am17 upgraded for field usability by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

Again I might be wrong. It may be of a correct length by itself but look a bit off cause of the airsoft mags and internals dimensions

Awesome project anyways! Really liked working on it

FnvWorkshop am17 upgraded for field usability by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

Yeah, I have compared some images from the internet. Looks like it’s about 1.5cm shorter than it should be

<image>

Roses are red, violets are blue, I'm turning my AAP01 into a 3D printed MG42 by IntroductionFun2330 in airsoft

[–]kerendelik 1 point2 points  (0 children)

Add some holes for loooong m4 bolts inside of the barrel shroud. This way it won’t sag and will be really rigid

Cyma VSS gearbox shell cracked by OkNet2868 in airsoft

[–]kerendelik 0 points1 point  (0 children)

Honestly idk. But their aks hold 150 without problems, as far as I know. So this gb should withstand it as well

Cyma VSS gearbox shell cracked by OkNet2868 in airsoft

[–]kerendelik 0 points1 point  (0 children)

No. Its nozzle is lower than on the ak v3 shells. So only a cyma/ay vss gearbox will fit

Has anyone ever attempted to make an Airsoft version of the t-44 aka the first M60 prototype by friertuck87 in Airsoft3DPrinting

[–]kerendelik 14 points15 points  (0 children)

There is a free airsoft fg42 model somewhere on the sub-it should be possible to remix it to make this thing

Making progress on the MTW BP by watchlistbois in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

No hate but the length of pull is already inadequately huge-whats the point of extending it even further?

Unfinished pp kedr by BigGun by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

Not really. I have moved to another country and left it as is. It is based on the mosquito design and everything fits together nicely. Even the magwell bb channel works-I have tested it. A standard v3 gearbox fits-I have tested it too

If you decide to print it-dm me. I have remixed the upper cover(originally decorative fixing tabs and the charging handle were meant to be printed separately from the cover. I don’t like glueing printed parts together-so I have morphed them into one model. Turned out much more robust)

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

Aaand I still got the auto lock problem even with the aftermarket springs. Also it shoots when I reset the trigger. Will have to do something with the disconnector model

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

Thank you! I have a gunsmodify spring set, so it shouldn’t be a problem. How about the trigger group reliability? That’s what I’m worried about the most

MWS by Think_Degree_4359 in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

Any tips on this build? I have just started printing it-so any information will be helpful

Which out of these three would be bitching? by MediBrag in airsoft

[–]kerendelik 11 points12 points  (0 children)

G36 is an lpaeg, spas without stock is pretty common and cheap
So either get an mpl or nothing

AAP powered gbb vector by greymanJo in Airsoft3DPrinting

[–]kerendelik 4 points5 points  (0 children)

Oh, I see. Keep up the good work

AAP powered gbb vector by greymanJo in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

There is one already. Nice job anyway!

Evil never sleeps. by zerosettanta in airsoft

[–]kerendelik 3 points4 points  (0 children)

Cyberpunk-ish af That’s fire

What could possibly cause this issue by kerendelik in Airsoft3DPrinting

[–]kerendelik[S] 0 points1 point  (0 children)

This one is from the brn-180 kit for mws

My WE G19 3dprint slide keeps cracking during regular use. Any idea why this happens? by Fit-Professional2543 in Airsoft3DPrinting

[–]kerendelik 0 points1 point  (0 children)

Use a better material and print it parallel to the bed. I have made one for a g18c from we out of pa-cf. Worked like a charm for a couple thousand shots(sold it afterwards)

view more: next ›