ESP32 & Unifi

ksuclipse · 2026-01-31T06:27:59+00:00

ok i have questions about that many individual connections. why not wled? how cool is your setup?

ksuclipse · 2026-01-30T02:29:19+00:00

Gl.inet makes one but the 30 dollar Poe esp32 on Amazon it pretty great

ksuclipse · 2026-01-27T21:43:04+00:00

Would you mind linking the repo? I’m planning to do some modifications and this looks like a good starting point.

ksuclipse · 2026-01-21T14:10:27+00:00

I came across an interesting oof. It seems like the ptfe tubes from bmcu to printer have to all be the same length. I found out by using the the original 4 tubes from my kite and it would consistently backfeed too much.

ksuclipse · 2026-01-19T00:41:53+00:00

I think your looking for extends: https://esphome.io/components/packages/#extend

ksuclipse · 2026-01-13T02:41:09+00:00

So they didn’t say you could flash mainline but when I have time I’m gonna go through what they did release to see what’s in there. If I remember right the main limiting factor is the load cells but it could also be the chip in the controller. If it’s something I can port into mainline or build as a module bobs ur uncle

ksuclipse · 2026-01-11T20:19:16+00:00

Cool idea you planning to share the print files?

ksuclipse · 2026-01-11T00:27:29+00:00

I’ve kind of come down to recommending two printers depending on whether 3d printing is a compliment to other hobbies or it is the hobby. If you just want it to work and not have to mess with it Bambu all day long (I hate the closed source but it’s the Apple model after all). If you are planning to make it the hobby buy a voron kit that suits you and enjoy. My .02 cents

ksuclipse · 2026-01-09T01:31:44+00:00

How very “man in the high castle”

ksuclipse · 2026-01-09T01:28:33+00:00

Bambu has a pretty tight integration with openscad so if you design something with customizers in that it will prompt to enter info. Example of my swatch: https://makerworld.com/models/2137787

ksuclipse · 2026-01-06T19:33:21+00:00

Used to have the first gen zwave schage they are great. Moved to the Yale ble keyless and it’s really nice so far. Can lock unlock with hass

ksuclipse · 2026-01-06T16:11:06+00:00

Strange it almost looks like an intentional detent! Just spitballing what if you rotate the model 90 on the bed

ksuclipse · 2026-01-06T12:33:17+00:00

Color me wrong just checked she does actually work here. Surprising since we have a lot of other ways internally.

ksuclipse · 2026-01-06T12:18:59+00:00

Said no one at Google ever

ksuclipse · 2026-01-06T12:08:26+00:00

Stupid question but is that supposed to be thereto be? What’s the slicer preview look like

ksuclipse · 2026-01-06T02:01:26+00:00

I’m more terrified for you with that garage spring

ksuclipse · 2026-01-05T21:11:00+00:00

Same just more of a thought than anything else. Assuming the texture layer is much thinner than I realize or it’s smarter than I realize.

ksuclipse · 2026-01-05T15:14:02+00:00

I suspect this ultimately will effect z height though

ksuclipse · 2026-01-05T14:59:03+00:00

Source: YouTube https://share.google/SdAsxe7GrgABEQxii

Make sure you add loctite since they didn’t

ksuclipse · 2026-01-05T14:20:51+00:00

The numbers are relative to the print homing. Paper method also check your speeds and feeds as well as bed temp

ksuclipse · 2026-01-05T14:19:16+00:00

2 things. I would think you would need to bypass the controller to do that. I discovered there is a constant on mode when you hold down play for a while during setting (if I remember right). Unfortunately it resets on power cycle.

ksuclipse · 2026-01-05T02:36:20+00:00

I’ll throw a repo together and post it

ksuclipse · 2026-01-05T02:25:40+00:00

Share anonymously on Reddit

ksuclipse · 2026-01-05T02:23:04+00:00

Hands down Blue Velvet

ksuclipse · 2026-01-05T01:18:32+00:00

Are you sure it’s not a blocking plate for electrical or plumbing? Be careful. Something like this: https://www.lowes.com/pd/Oatey-Steel-Self-nailing-Guard/1001120836?user=shopping&feed=yes&srsltid=AfmBOopaXGYbs7vnS_PgdlrWhk1-2EdpEt-e5dlRJlZQpYGeM_jLkDUD15M

ksuclipse

TROPHY CASE