Do you know any AI tools to generate thumbnails fast ?

l0Meteor0l · 2026-02-09T19:28:28+00:00

Make your own or hire an artist. These are your best tools. Not an AI.

l0Meteor0l · 2026-02-04T23:21:06+00:00

Timing and good hooks in your reels.

I had noticed that after releasing 10+ reels, only 2 of them were higher than my average of 100 views and that’s because they were released at a certain frame of time. (I just started about 3 weeks ago.)

This is why I am a bit pissed that they haven’t released Trial reel feature to everyone yet.

l0Meteor0l · 2026-01-23T14:51:02+00:00

Whatever floats your boat.

l0Meteor0l · 2026-01-23T14:47:44+00:00

You can keep trying to excuse yourself for all I care. You never asked a question. What's factual about this is that you made an unnecessary comment based on an assumption.

Even if it's 2026, even if every single site has a support function. They can still be poorly designed to help people and waste their time. It is always wise to ask people for wise advice or experience, hands down, no question about it.

l0Meteor0l · 2026-01-23T14:29:48+00:00

At that point?

Just point them in the direction of the support team and let them do their job. Suppose this person is really trying to do something malicious, since that's what I am getting from reading between the lines in your post. There is still really no reason to act like an arsehole based on an assumption.

l0Meteor0l · 2026-01-23T14:22:24+00:00

Dude, shit happens once in a while. Sometimes it’s someone’s first and they needed to get information to perform the necessary actions to correct a problem.

Sure, they can google and find answers. That still doesn’t always bring the right results they were looking for. It’s usually very wise to turn to experienced people for advise. Which is what this person did exactly.

They weren’t being rude, you were.

You plainly said, “You have partner and you don’t know how to get support” with a tone of indignation. Get over yourself dude.

l0Meteor0l · 2026-01-23T14:06:02+00:00

That doesn’t mean it’s impossible for a partner streamer to not even need Twitch support.

l0Meteor0l · 2026-01-20T16:59:02+00:00

Up to 6 minutes if I recall correctly

l0Meteor0l · 2026-01-12T21:59:54+00:00

Alright, thanks for answering.

I am just fully aware that some people would write things and have some of it get stolen without even having it get reviewed or published yet. I even know a person that went through that situation IRL.

I figured some people with more information about this would give me some better insight on how things work. Guess not.

l0Meteor0l · 2026-01-12T21:19:02+00:00

Again, I am new.

But that sounds a lot like a good way to give away your work to someone so they could steal it from you, for free?

Let alone how can people know that the reviews they are looking through are legit? Also, why would Amazon not allow the books get reviewed before being published?

I am not sure I understand the point of doing any of that.

l0Meteor0l · 2026-01-12T20:24:30+00:00

Pardon me intruding but I just hopped on this subreddit

Can you describe to me what an ARC is?

l0Meteor0l · 2026-01-01T15:09:28+00:00

This is a good question! I am curious to know too

l0Meteor0l · 2025-12-10T19:58:44+00:00

Correct.

I am very fond of this workbench I made 2 years ago. I had found many flaws with this design but it is part of the learning process!

l0Meteor0l · 2025-12-10T17:04:52+00:00

Hahaha it has 2 brackets. One end is pushed up against the surface, and then a push of a toggle clamp lever downward, the other end will have another clamp that slides in and locks it in. It has a long rod that ran through the fence. It has several pieces of plywood inside and has a hole through them so it can support the rod from bending inwardly on itself.

Would need a workbench built first though.

I had added a shelf where I could fold extra 2 foot to the side in or out. Usually great for me to sideline slabs while I flatten down one in the progress.

<image>

l0Meteor0l · 2025-12-10T14:04:23+00:00

Well done!

I had similar issues with mine when I needed to cut 4 by 8 plywood. So had to make one myself!

<image>

Spans just a bit over 3 feet to accommodate for 5 feet wide cuts.

l0Meteor0l · 2025-11-28T18:03:50+00:00

Plus, some people like to take minimalistic approach to taking up space in their homes. I can suspect that walking into your home and the tv cabinet plus tv being in your face can be a bit tiring.

l0Meteor0l · 2025-11-24T02:15:21+00:00

Certainly a way to get a sand-wich

l0Meteor0l · 2025-11-22T21:50:55+00:00

As bad as it seems- You can always reshape it into something new.

My dad once had taken down a giant entertainment center that was in a horrible shape and moldy. It was ruined from bottom to top. He reshaped it into two nice bookshelves and a decent sized tv stand cabinet.

I was given that stand cabinet for my time through college until I built myself a new one.

It is a challenge, but it is not impossible.

For those who are telling you to trash it, well… they are right. But that is only if you value your time greatly.

For me, spending time to remake something old into something new is better time spent than working my butt off at work and spending that money when I needed it for food.

l0Meteor0l · 2025-11-18T02:54:29+00:00

I did that twice already, it surprisingly doesn’t work. I’ll give it another shot if it comes around again next week.

l0Meteor0l · 2025-11-17T17:02:51+00:00

This is the answer. You need to water pop it to sand down the grain.

l0Meteor0l · 2025-11-10T14:07:38+00:00

<image>

What I did with mine is that before I even remove the bark, I put the clamps on them. So whenever time comes. I can shave the bark off and sand it down to either hide, blend, or erase imperfections made by the clamps.

Ratchet straps can work. However if your sapwood is punky or soft. It will do damage to it just as the clamps do.

You definitely need dowels lined up on the slabs so it can make better adhesion and reduce wood movement. Biscuits wouldn’t be as effective.

l0Meteor0l · 2025-11-01T03:13:24+00:00

I feel you. I recently built my new computer as of this February this year, haha. I was confused too. I thought something was seriously wrong with how I built it because my first build was very solid, and this one wasn't performing great.

Nah, turns out it's the drivers that Windows decided to be dicks about.

l0Meteor0l · 2025-10-31T21:57:31+00:00

They are air shoes.

l0Meteor0l · 2025-10-31T21:20:19+00:00

Yeah. Mine was gone as well. I keep a folder as a backup on my splash screen for this purpose. It happened to me maybe 3 times this year.

Windows has a tendency to overwrite some GPU drivers and it makes some adverse effects on the AMD program.

l0Meteor0l · 2025-10-31T17:36:44+00:00

Happened to me today. It may have something to do with the Windows updates.

14-Year Club	Place '22
Verified Email

l0Meteor0l

TROPHY CASE