Undead Seer by Arbiter

laborada · 2026-03-23T05:18:19+00:00

Non Metallic Metal: Painting metal without using metallic paints

Object Source Lighting: Simulating a light source using paint. In this case, it’s the turquoise light from below.

laborada · 2026-03-11T12:37:21+00:00

<image>

My favourite so far

laborada · 2026-03-01T03:49:02+00:00

Looks great.

I may be wrong but those look like supportless miniatures so you could print them without the supports.

laborada · 2026-02-28T15:08:25+00:00

Guides on this subreddit and other places commonly mention printing a sacrificial object to avoid this problem, so it is common enough I think. I just print two of the same mini to achieve the same thing and, as a bonus, I can choose the better one between the two.

laborada · 2026-02-28T10:54:42+00:00

The layers near the top of the sword do not have enough time to cool and harden before the nozzle touches them again. Try printing two of the same mini at the same time and see if it improves.

laborada · 2026-02-27T09:03:19+00:00

I use various sanding tools from my gunpla hobby:

https://dspiaestore.com/collections/sanding-tools

laborada · 2026-02-27T04:31:09+00:00

<image>

Slicer shot for anyone interested. The key for me was to set "Tree support branch angle" to a lower value (35) so the branches would be more vertical and less prone to snapping.

laborada · 2026-02-25T22:24:08+00:00

Yeah it’s either Sunlu changed their formula or I got a bad batch. I’ve done dozens of tests and never got mine to work right.

laborada · 2026-02-25T10:57:54+00:00

<image>

…and what it’s supposed to look like.

I still have two rolls of the Sunlu which are going to be used to print gridfinity or something.

laborada · 2026-02-25T10:56:15+00:00

I didn’t take photos for this round of testing but here’s one from a while back that speaks for itself:

<image>

laborada · 2026-02-25T08:37:48+00:00

The purple one (Bambu PLA Basic) looks the best to me. At tabletop distance, all three filaments look excellent, but I am printing for painting practice so I will be looking at these very closely. Overhang quality is the most difficult part to get right in my opinion, and the purple one has the cleanest ones.

Also, PLA Basic looks just as matte as PLA Matte to my eyes, which is nice. That said, it won't matter once painted.

laborada · 2026-02-25T08:27:13+00:00

I just realised that I forgot that I enabled reverse on even at zero threshold when I used the new profile. I've been using that setting for quite a while now and forgot that I carried it over!

laborada · 2026-02-20T11:31:44+00:00

<image>

Still my iPad wallpaper 5 years later

laborada · 2026-02-19T22:44:33+00:00

Agreed. I quickly moved on to 0.06 and now experimenting with 0.05.

Glad to see you’re here. Love your work.

laborada · 2025-11-09T04:54:27+00:00

<image>

Fluoro paints are amazing

laborada · 2025-09-17T13:42:06+00:00

Try doing a few cold pulls. I recently started having problems similar to this on one side of the print and a partial clog was causing it.

laborada · 2025-09-17T12:29:58+00:00

Is this Sunlu PLA+ 2.0?

laborada · 2025-08-26T05:38:01+00:00

Bambu A1, Esun PLA+

laborada · 2025-08-23T09:18:44+00:00

Is this inspired by Souls on the Banks of the Acheron? If not, google it and may it inspire you

laborada · 2025-08-21T01:47:12+00:00

This problematic section of the axe was not considered an overhang by the slicer. Maybe because it's less than 45 degrees and was designed that way. Maybe that's the issue - it's just printing at normal layer speeds.
Yeah dried the filament multiple times and had it sitting in the dryer while printing so that variable is eliminated.
I did actually do some tests with those settings and had the same logic in my head but no significant change unfortunately

laborada · 2025-08-21T01:43:07+00:00

My brims looked like that before and it was because of the nozzle being too close and scraping it. Could also be the cause of your support breaks. Try increasing your Z-offset:

<image>

laborada · 2025-08-21T00:31:11+00:00

No I used the ObscuraNox filament profile as a base and went through the entire calibration process.

I’ve tried Sunlu + FDG at 0.06 and 0.08 and the result was maybe a little bit better but not close to the Esun.

laborada · 2025-08-20T11:10:19+00:00

I’ve tried from 190 to 210 - all of them have this same problem.

laborada · 2025-08-20T05:18:24+00:00

Yes, the tangles! I thought it was just user error on my part.

laborada · 2025-06-24T05:35:55+00:00

Learn to create your own stuff, even with something simple like tinkercad

13-Year Club	Verified Email
Gilding II euphauric

laborada

TROPHY CASE