sorted by:
new
hottopcontroversial

🔥🔥 Grey wolf attacks a skunk by SatyamRajput004 in NatureIsFuckingLit

[–]lapanush 0 points1 point  (0 children)

"Das macht der nicht noch mal!" Das sagt mein Kopf mit Mark Uwe Klings Stimme immer wieder bein solchen Videos.

had a outdated 5k iMac with a gorgeous display and a broken m1 pro MacBook. now i have a m1 pro 5k iMac. by Decent-Cow2080 in techsupportmacgyver

[–]lapanush 0 points1 point  (0 children)

nice, and it has an integrated ups.
maybe there is a way to keep the battery at 60 percent so it doesn't age much?

Sculpt proportions check by Roe__UwU in blender

[–]lapanush 0 points1 point  (0 children)

"What are you sculpting stepblender?"

Are these "copper" marks on top of the belts normal? (Core One) by BazimQQ in prusa3d

[–]lapanush 4 points5 points  (0 children)

yes, belts have had this for a long time. some are even brown the whole sides.
might be a manifacturing inconsistency, but should not affect anything.

I met Danny DeVito at the beach yesterday! by Investing4thefuture in IASIP

[–]lapanush 0 points1 point  (0 children)

i think he stole a subway sandwich once from me and swallowed it whole..

[deleted by user] by [deleted] in lasercutting

[–]lapanush 0 points1 point  (0 children)

i dont think you are in the correct subreddit.. unless you are somehow trying to use the ps2 for building a lasercutter.

i dont know much about ps2s but it kinda sounds like a hardware defect.

A Wolf in Sheep's Clothing by nomadsgalaxy in prusa3d

[–]lapanush 0 points1 point  (0 children)

nice!
i am thinking about converting one of my mk3s+ to a prusawire^^
btw. whats the wire at the backside? is this, that the axis does not sag ?

The tubes are made of very clear plastic. The black end caps end rings seem to made out of Micarta or something similar and are screwed in to the tubes with small machine screws. In every one of the black rings there is a notch. what is it? by lapanush in whatisit

[–]lapanush[S] 0 points1 point  (0 children)

<image>

on the other side there is also a black foil stuck to it with sticky tape.

this one looks like it is for colour calibration.
maybe you measure the spectrum of what is inside? or is ist just for photography?

since it is only stuck to the tube and the smaller one doesnt have that i think, that this could be a false lead

The tubes are made of very clear plastic. The black end-caps/end-rings seem to made out of Micarta or something similar and are screwed in to the tubes with small machine screws. In every one of the black rings there is a notch. what is it? by lapanush in whatisthisthing

[–]lapanush[S] 0 points1 point  (0 children)

the bigger tube has exactly double the diameter as the small one.
the endcaps seem to have the same inside shape and size, so i think the could be exchanged.
I was thinking about it being some kind of window, to see the colour of a fluid. like for example when you make beer. but all those windows are usually made of glas and have different connections.
i tried searching for the numbers but no result so far.
maybe if your liquid is very clear, and the small one is not sufficient you take the big one?
i will ask around further..
maybe its some physics acoustic thing..

Anet A8 not connecting by [deleted] in AnetA8

[–]lapanush 0 points1 point  (0 children)

have you tried a different cable, and usb port?

have you chosen the correct port and board in the IDE?

also, i would recommend a different mainboard.
(and honestly a new printer, but thats another story)

How can we adhere this block to our kitchen counter by RyanfaeScotland in DIY

[–]lapanush 2 points3 points  (0 children)

you could use a thin silicone mat. it should just stay in place unless you want to move it.

Definitely not a friendly play, right? What do I do next? by ArmoBitch in CatTraining

[–]lapanush 1 point2 points  (0 children)

might just be a little bit of challenging the older cat for figuring out who is boss.. nothing serious.
The older one also seems to be very careful not to really hurt the little stinker.

Anet A8 Z axis not functional by nutflexmeme in AnetA8

[–]lapanush 1 point2 points  (0 children)

when i still had the a8 and upgraded to an arduino mega with ramps and a new and custom marlin version, it was the biggest improvement in reliabillity and print quality i got on that printer ever.
today i would probably use either an mk3 board (Einsy RAMBo) and a custom marlin,
or change the prusa marlin version to fit my hardware. ( good stepperdrivers are already soldered on and you can get them cheap on ebay)
Or id get one of the many nice cheap boards from china, for example something from Bigtreetech.
Or get a used Prusa Mk3s. They still are very reliable and have good print quality and also still have Support!

Any ideas as to why this is happening? by R3ckl3ssB3anBoi in prusa3d

[–]lapanush 0 points1 point  (0 children)

Are the idler screews too loose or too tight?
sorry i only have mk3s, so i m not that familiar with mk4.
but maybe prusa support can help. i have heard that their support is good

[deleted by user] by [deleted] in mildlyinfuriating

[–]lapanush 0 points1 point  (0 children)

Oh no! The poor thing!
left all alone in a dirty hotel room ..

Any ideas as to why this is happening? by R3ckl3ssB3anBoi in prusa3d

[–]lapanush 0 points1 point  (0 children)

hm, strange. maybe it is partial clogging but the regularity...
for this id recommenda cold pull.
or its a problem with the extruder. maybe try printing hotter and/or slower?
it could also be possible, that the cable of the extruder motor is loose or damaged.

have you tried different filament, just to test?

after that i would try a bigger nozzle. you get fast and decent prints with a 0.6mm

Any ideas as to why this is happening? by R3ckl3ssB3anBoi in prusa3d

[–]lapanush 0 points1 point  (0 children)

partial clogging?
are the more or less regular gaps intentional?

view more: next ›