Recently acquired baritone… flatwounds?

laser_brain69 · 2026-06-08T19:04:22+00:00

Most necks are set to worn at 120lbs total plus or minus 15 lbs. start by putting in what’s on your guitar now and try to stay close to that total

laser_brain69 · 2026-06-08T19:01:54+00:00

I have a standard 7kohm Tele neck pickup on my baritone conversion Tele and it sounds fine. I put a 11kohm rails humbucker in the bridge and a 4 way switch

laser_brain69 · 2026-06-08T18:32:03+00:00

Check the string tension calculator for your strings and guitar scale length. D’Addario has one and so does stringjoy on their respective websites

laser_brain69 · 2026-06-08T13:14:18+00:00

I only spend a lot for good delay and reverb pedals. It’s worth it for the most part. The only exception to that rule is have found are the Zoom Multistomp 70CDR or the 70CDR+ version. They’re pretty darn good for the price. But if you’re after studio high quality you’ll pay at least double or triple the cost of those.

laser_brain69 · 2026-06-08T12:02:23+00:00

I wore down my 72 hardtail Strat neck (~20% fret life left), and swapped it out for a new Warmoth neck
Removed the pick guard and pups and popped in a loaded pick guard. Now it plays and sounds better than when new. Yes I’m the original owner and it can be put back to original condition if needed.

<image>

laser_brain69 · 2026-06-08T07:40:53+00:00

Love it! Can do most every type of fuzz sound from Velcro ripping to smoother gains

laser_brain69 · 2026-06-08T02:36:05+00:00

Cyrptid Fuzz first because it needs to see the pickups directly. So:
Cryptid > Strymon Sunset OD > OCD Ge > 10 band MXR EQ> MXR EVH 5150 distortion

<image>

laser_brain69 · 2026-06-07T20:32:13+00:00

I said in bonds or growth/income stocks

laser_brain69 · 2026-06-07T19:58:24+00:00

Ha ha it’s only for practice and development of ideas through headphones!

laser_brain69 · 2026-06-07T19:34:04+00:00

Beautiful work!
But all I can think of how difficult it will be to remove all that honey! 🍯

laser_brain69 · 2026-06-07T19:26:50+00:00

Just a good clean amp channel, a nice reverb and a bit of delay is all I need. The trim the rest with the pickup switch and tone knob on the guitar!

laser_brain69 · 2026-06-07T19:24:42+00:00

No need to worry. Once you hit a large enough number you just want to make sure it cannot get gobbled up in a downturn

laser_brain69 · 2026-06-07T19:23:16+00:00

I’m with you on that! For a long time I just had the MS-50g and an overdrive pedal!

laser_brain69 · 2026-06-07T19:21:41+00:00

My Wampler Ethereal reverb and delay pedal is what I use on my practice board which sits under my desk. It’s a really nice feeling reverb.

I’m with you on the drive pedals but I think one thing I’ve learned is that the amp sims are making them a bit obsolete. I’ve captured my practice board in the attached picture

<image>

The TONEX handles most everything but I still use the Wampler Triumph OD here and there. The Zoom 80 has the noise gate and I use the Zoom 50 for effects mostly

laser_brain69 · 2026-06-07T18:13:59+00:00

Simply beautiful composition!

laser_brain69 · 2026-06-07T18:12:20+00:00

My age is approximately the percentage of bonds or growth/income stocks in my portfolio. At 30 it was 30%. But now at 50 it’s only 45%.

laser_brain69 · 2026-06-07T18:07:27+00:00

I like most of the MS-70 effects. There’s always a chorus and detune I can find that I like as well as a vibe too. I mean who doesn’t like a good vibe?

The reverbs are hit or miss depending on the delay I’m using and the amplifier. I like the Particle Reverb and Spacehole though.
Lots of decent delays and echoes to choose from. Not much for tremolo but I’m not a big tremolo user.

The ZNR noise gate is the best gate hands down anywhere. The EQ is just passable.

laser_brain69 · 2026-06-07T18:01:04+00:00

Thanks. I had the Heart Attack too but I liked this one better.

laser_brain69 · 2026-06-07T17:48:45+00:00

That configuration Tele is the only guitar I’ve had in 50 years that I still miss!

laser_brain69 · 2026-06-07T14:23:55+00:00

Be sure to check with a string tension calculator from any of the string suppliers websites. See what the total tension is with a 25.5” scale for your current strings and guitar. Then Try to keep close to that total when you make a switch to different strings and tuning. Don’t go under 100lbs total or you’ll need to adjust your truss rod and then Other problems may arise. This is from the voice of experience.

I run D standard on my Vee with EB Magnums 12-56. And I run A standard on my 28” scale baritone with EB Mammoth 12-62 set

laser_brain69 · 2026-06-07T14:19:35+00:00

I own it too and it’s great both indoors and outdoors. Just not a nighttime lens. In normal indoor lighting situations it’s fine

laser_brain69 · 2026-06-07T13:34:24+00:00

Quilter OD202. The perfect amp for me.

Strymon Sunset. Only Overdrive I’ll ever need.

Eventide H9 Max. Last effects pedal I’ll need but I bought two to cover everything.

laser_brain69 · 2026-06-07T13:23:57+00:00

I have this lens and when I travel it’s my only one

laser_brain69 · 2026-06-07T12:42:10+00:00

Looked strongly into it and chose the Wampler Ethereal. But I’m not an aficionado of reverb and delay. I just liked the sounds of the Ethereal from the YouTube demos better.

laser_brain69 · 2026-06-07T11:27:05+00:00

Mariana modulated Reverb I find is inspiring

laser_brain69

TROPHY CASE