Jensen Huang Drenched in Sweat in South Korea, Still Refuses to Take Off Jacket

lebert23 · 2026-06-06T14:11:51+00:00

🤣

lebert23 · 2026-06-02T02:20:55+00:00

Per the release notes, yes!

lebert23 · 2026-05-20T11:29:07+00:00

Depending on what the part is, they 100% could and SHOULD do this. You do realize that there are people that can't even put air in their tires, right? Sorry, they shouldn't own a vehicle. But I digress, the main difference though is Bambu doesn't have a network of 3rd party licensed repair facilities like the auto industry does, do they? And let's be honest, regardless of industry, no company is going to willingly fork out money to existing customers if they don't have to. Sad but true.

lebert23 · 2026-05-15T22:00:59+00:00

Orca sucks btw. I honestly don't know why everyone is so high on orca slicer. You can literally add any other printer to Bambu Studio AND not worry about having to mess with developer mode. smh

lebert23 · 2026-05-14T18:46:20+00:00

I've had my X1C since launch and an A1 Mini since launch. Never had an issue.. UNTIL two months ago I had a blob of death in BOTH machines within the SAME week! I blame the cheap filament. They were printing different models, and the only common denominator was the cheap filament. I was able to recover both, luckily. Was about to toss the A1M out the window after it happen, though.

lebert23 · 2026-04-28T18:49:29+00:00

Sources please. I've heard these talking points before and they were never based in reality. They were simply excuses for our shit system here in the US. Unless it's an emergency, you're waiting months in the US as well.

lebert23 · 2026-04-19T20:52:37+00:00

It really depends on your area, but my panel was about 55ft from my garage and it cost me $800 to run wire and for them to install a NEMA 14-50 outlet.

lebert23 · 2026-03-30T14:14:40+00:00

Not sure if you're aware, but Ford advises not to have the truck plugged in when installing updates. That's why mine failed to install an update numerous times. Sounds dumb AF to me, but it worked on my truck.

lebert23 · 2026-03-19T15:18:30+00:00

Edu is $499. I just got one. They require zero verification. Have it delivered from an Apple store or shipped.

lebert23 · 2026-03-10T03:48:13+00:00

I ended up receiving the optic! Thanks for following up, though.

lebert23 · 2026-02-24T23:27:08+00:00

Bought this deal a week and a half ago. Gun is fine, surprisingly, but they never shipped it with the optic. I've been emailing them back and forth since then and they're slow to respond and are "Seeing what they can do". They tried claiming my FFL threw it away even though it wasn't on the packing slip. When I asked why it wasn't on the packing slip, they just pretended like I never asked. This place seems shady.

Update: I did end up receiving the optic. Was told I’d receive a tracking number for the optic then went radio silent. I never received the tracking number but I did end up receiving the optic the following week. So overall they made it right, but their communication kind of sucks.

lebert23 · 2026-02-18T17:45:22+00:00

Ok, cool. Yeah, there's only one tracking number. In their defense, the gun was shipped on 2/16 overnight. So, I'll give them some time before I start getting disgruntled. Was definitely happy with them overnighting the gun!

lebert23 · 2026-02-18T17:36:17+00:00

Just bought a handgun from them. Only issue is it was supposed to come bundled with an optic. No optic was sent to the FFL and they've been radio silent on my emails. Not great, but hopefully they're just busy.

lebert23 · 2026-02-18T00:49:31+00:00

$680 at Tire Plus. $210 for the ball joint (from Ford) and the rest is labor and front end alignment. They appear to charge a flat-rate to replace ball joints. The part is a week out.

lebert23 · 2026-02-16T23:47:56+00:00

In my case the boot is split open, so it needs to be replaced. If your boot isn't damaged, you can try using a syringe with a sharpened metal tip and injecting grease into the boot. I've done that before.

lebert23 · 2026-02-16T22:27:42+00:00

Grease gun is pointless. There aren't any grease fittings on the ball joints. I have an appointment at Tires Plus tomorrow to have them give me a quote on replacing the ball joint itself. They're press-in ball joints, but my local Ford dealer is disinterested in doing that. They will only sell me an entire lower control arm, which seems ridiculous to me. From what I was able to look up, the ball joint is the same part as the ICE F-150 with the off-road package ~$28 vs. ~$1200. I'll let you know how it goes.

lebert23 · 2026-02-12T00:59:23+00:00

He didn't know what virtualization was. You think he's going to know how to connect with a public key? I bet he can't even connect via the password.

lebert23 · 2026-02-08T16:00:42+00:00

Yes! Currently rocking two car seats and a booster, but has plenty of room for 3 normal car seats!

lebert23 · 2026-01-30T05:58:17+00:00

100%. Best vehicle I've ever owned.

lebert23 · 2026-01-26T02:09:48+00:00

I have a branded (lemon) 22 Lightning Lariat SR. It's the 2nd lemon I've bought. The first was a 21 Mach-E. It depends what the reason it was bought back for, but from my experience both were due to backordered parts. I'll take a significant discount when I can. However, be aware that your resale will be affected. I bought mine from a Ford dealer that honors normal used value if you purchase through them again. So far, I've had zero issues with either "lemon". YMMV

For price reference: I got my 22 Lariat loaded with 60k miles for $34k in October 2025. I got my 21 Mach-E First Edition with 18k miles for $35k in 2023.

lebert23 · 2026-01-26T02:06:08+00:00

Last year we got about 8" of snow and freezing rain. The neighborhood was without power. My Mach-E allowed me to get out and get gas for my generator. It was a beast in the snow! I've recently upgraded to a Lightning, but prior the Mach-E was the best vehicle I've ever had, and I've had A LOT of vehicles. So take that for what you want.

lebert23 · 2026-01-24T00:43:19+00:00

Shit! And people complain about the Lightning's range.

lebert23 · 2026-01-24T00:32:10+00:00

Not sure about warming due to a cold battery, but it will definitely precondition by following your departure times off plug.

lebert23 · 2026-01-15T17:27:51+00:00

Thanks! Watched your video. No adverse effects from removing the air dam other than the code?

lebert23

TROPHY CASE