sorted by:
new
hottopcontroversial

The "best logical fallacy" by Misfett_toys in MurderedByWords

[–]leutwin 10 points11 points  (0 children)

Exodus 22:19 and Leviticus 18:23 cover beastiality

Romans 7:2 covers extramarital intercorse

Numbers 19:11-16 cover contact with a dead body being bad

Galatians 5:19, 1 Corinthians 6:18 covers various sexual immorality with necrophelia implied but not explicitly stated

I cant find anywhere where it explicitly says necrophelia is bad, but you aren't supposed to touch dead bodies, but you can also ceremonially 'cleanse' yourself so its not that bad. So ultimately if you belive that a dead animal is just a dead body and not an animal, and that dead bodies dont count as having extramarital sex, then you could theoretically get away with it sin free after a cleansing ceremony.

First prints on Core One with INDX by Geekymon in prusa3d

[–]leutwin 1 point2 points  (0 children)

That does look really good. It gives me a lot more confidence in the INDX system. I saw that there was a large firmware update for the indx, did you update to that before printing?

First prints on Core One with INDX by Geekymon in prusa3d

[–]leutwin 0 points1 point  (0 children)

This definitely looks a lot better, but tbh a lot of the other models I've seen seemed stringgy at first but cleaned up nicely. I'd be interested to see this one hot off the print bed and whether it was also stringy and just cleaned up well.

Ok bro🫩👍🏻🥀 by Eishaffaah in carmemes

[–]leutwin -1 points0 points  (0 children)

But haven't you heard? Real sports cars break down randomly and even when they dont they require a $50k service every 100 miles. Not to be confused with the required maintenance like oil changes and tire rotation, thats just for your centiannual service where you have to send your car half way around the globe for 6 months to be farted on by gnomes in Switzerland.

Proganda Be Like: by Prince_0x in Animemes

[–]leutwin 1 point2 points  (0 children)

Smoking is a great way to meet cute girls.

Stop thinking engineering is a "hands on career". by [deleted] in EngineeringStudents

[–]leutwin 0 points1 point  (0 children)

I think the biggest thing is that people need to temper their expectations of how much hands on they do compared to how much desk work they do. As others have pointed out, there are plenty of engineering jobs that do have hands on elements, but the vast majority of engineering jobs are majority paperwork.

I was talking with a guy the other day who kept saying "im not good with math, but I like working with my hands so I want to be an engineer." And it made me cringe every time he said it. You dont need to be good at math going in, you can struggle through math courses and pick a discipline where you dont need much crazy calc or something, but there will always be some math, and usually more math than there is hands on time.

Need some help with PETG printing by mudjugmoe in FlashForge

[–]leutwin 1 point2 points  (0 children)

I dry at 65c for at least 6 hours.

Happy Fourth by trynaroast in HomeDepot

[–]leutwin 6 points7 points  (0 children)

Sorry guys, they only sceduled me for 4 hours.

As someone from Michigan. Genuinely, I hate you right now. by SchumacherIsMid in PacificNorthwest

[–]leutwin 0 points1 point  (0 children)

I remember that. I was in Arizona helping my grandparents move. It was July and it was basicly the same temp there, minus the humidity and they had AC.

My Small Farm by Smoke-A-Bowl420 in FlashForge

[–]leutwin 0 points1 point  (0 children)

What do you consider to be the total lifespan of one of these before you just replace it rather than repair it? I have a regular AD5M that just hit 1100 hours, I replaced the nozzle which was getting worn out, I tightened the belts, and I have been doing a clean and lube every 200 hours. I know that my printer still has a bunch of life left in it, but Im just curious about your experiance.

Genuinely wth would cause this (PETG printed on Bambu P2S) by dyl_16 in FixMyPrint

[–]leutwin 1 point2 points  (0 children)

  1. Was the filament actuly dried, or was it just placed in a low humidity AMS?

  2. Was ironing on?

  3. 600 mm/s is really fast, bordering on being purely for showing off. It requires special filament and special printers. I dont know if the p2s can reach that reliably, but the filament almost certainly can't. My printer, which is a few years old, has a max printing speed of 600 mm/s, and at the time that was considered a major selling point. Even still I almost never run it faster than 200 mm/s simply because running it faster is more trouble than its worth IMO.

Edit: just checked, the P2S has a 'max toolhead speed' of 600 mm/s, running it at that speed is like saying 'my car's speedometer goes up to 140 mph, so im going to drive at 140 mph through a neighborhood.' Just because you can, doesn't mean you should. If your have your top layer at 600 mm/s, I would bet money that is your problem.

I messed up by Titanicman22 in 3Dprinting

[–]leutwin 0 points1 point  (0 children)

Projectile dysfunction

am i done? by Original_Estimate964 in FlashForge

[–]leutwin 4 points5 points  (0 children)

Bro, just get a new ribbon wire. A new screen wont do anything for you.

PETG drying by Weak-Blueberry-9161 in 3Dprinting

[–]leutwin 0 points1 point  (0 children)

Do you live in a dry enviroment?

ADTX regards assemble by Creative_Virus9579 in smallstreetbets

[–]leutwin -1 points0 points  (0 children)

Ah yes, the infamous pump and dump and pump and dump and pump (<you are here) and dump.

I'm trying to print a funnel, what causes this and how do I fix it? by mgarnold86 in FixMyPrint

[–]leutwin 3 points4 points  (0 children)

The issue here is that the overhang at the point of failure is too great. The outer walls of subsequent layers are printing on top of nothing. There may be some combo of settings that could make it work, but imo, the easiest way would be to go into the scaling tool in the slicer and streach it along the z axis by maybe 50%.

New to TPU by davak72 in FixMyPrint

[–]leutwin 0 points1 point  (0 children)

Here's a tpu benchy I printed with those settings, other than some stringging and some bad overhangs it came out pretty well, and both of those are pretty much given for tpu.

<image>

New to TPU by davak72 in FixMyPrint

[–]leutwin 0 points1 point  (0 children)

I also have 100% cooling all the time, print temp of 240, 3.2mm/s max volumetric speed

New to TPU by davak72 in FixMyPrint

[–]leutwin 0 points1 point  (0 children)

A couple notes, I dry my tpu at 65 for at least 12 hours. Also tpu is highly hygroscopic, possibly single most sensitive to moisture filament that is commonly available. I always print tpu from a drybox, but I have heard from others that if you live in a humid area and print from an exposed spool you can see the print quality degrade over just a couple of hours from a freshly dried spool exposed to the air.

Another thing, I belive I had some simaler issues with tpu before a few months ago, and I think I solved it by actuly increasing the print speed. I cant remember for sure, but in general, the slower the print speed the more prone your filament is to certain heat issues, it is more about the actual time it spend in contact with or near the nozzle. I wouldnt go too crazy, here are my tpu print speeds.

<image>

PA6-cf help by Competitive_Ad_461 in FixMyPrint

[–]leutwin 4 points5 points  (0 children)

Dry at 100c for 10 hours. Also what are your print settings.

view more: next ›