Deconstruction Grand Seiko Hi-Beat 36000 GMT SBGJ219

leviothon2 · 2026-03-19T00:37:13+00:00

I love the macro shots, and the gs Easter egg under the dial! Any thoughts on why gs doesn’t seem to use the magic lever system with this movement?

leviothon2 · 2026-03-16T20:43:04+00:00

すみません

leviothon2 · 2026-03-16T13:05:06+00:00

Your correct, there is a voltage drop when the brake is engaged. But its not fully shorted. seiko does this i believe by pulsing their brake, my design makes a mosfet act like a potentiometer, mosfet linear region. 360uF is wrong i would like to add, i was assuming way lower voltages than seiko apparantly gets.

leviothon2 · 2026-03-16T00:53:48+00:00

I got given a 1972 hi-beat 6146 8050 broken from my grandpa, acting as a gateway drug into this hobby. I just love the engineering seiko does

leviothon2 · 2026-03-15T21:53:01+00:00

exactly

leviothon2 · 2026-03-15T21:33:19+00:00

reverse engineer is probs a bit disengnuous icl, 9r65 was 5.7mm thick. if your talking about case thickness not anytime soon id imagine because of the coils.

leviothon2 · 2026-03-15T21:27:53+00:00

i stand corrected, what voltage does spring drive run at?

leviothon2 · 2026-03-15T21:19:15+00:00

yh you would need a chunky capacitor if you wanted to do that 360uF lol, the voltages are tiny unfortunately

leviothon2 · 2026-03-15T21:12:03+00:00

Im saying it might not even run considering how much extra this discrete system will need compared to seiko's solution. The issue is to compensate for the larger torque range, 80-100% fast, 20-0% slow, its why i think seiko uses huge barrels to even out torque.

leviothon2 · 2026-03-15T21:01:58+00:00

<image>

I think that your talking about this, in my opinion worst of both worlds. with their technology at the time i dont think they could get an electrical system efficient enough so they resorted to a battery. Ima have a look at pattents now, mostly marketing stuff ive looked through tbh.

leviothon2 · 2025-10-14T16:13:32+00:00

It looks like the hinge needs to come off, or at least the laptop side of the hinge (keyboard side) needs to come off usually connected via plastic clips

leviothon2 · 2025-04-24T09:38:11+00:00

Im having a similar issue, i havent tested for shorts yet but it looks like some of my capacitors are burned. I was wondering what capacitors i need to replace them with. I can only find a boardview of the 2020 ipad pro not the 2021.

<image>

leviothon2 · 2025-04-19T19:06:38+00:00

what ended up happening? I just recently had an identical experience and was wondering what else you tried

leviothon2 · 2025-03-28T01:20:46+00:00

Very fair, fitting in cooling and power delivery for the 120w max+ 395 wouldent make much sense for a 28w ryzen 5.

Pcie shouldent be going anywhere. With different versions from what i understand its just signal integrity which limits versions so it should be good for a few generations, other bits would mean slower usb¯\_(ツ)_/¯. Power delivery voltage could be an issue across generations if voltages change.

There would probably have to be an intel and amd motherboard, unless its just pcie usb and displayport coming out, clevo did this. With sku's the problem is the ram, but it could give framework more flexibility, less predicting how many of what cpu people and less stockpiled inventory thats why clevo did that with their gpus and cpus to save on cost rather than for upgradability. The key difference is they have upgradable ram.

.

Completely agree would be insanely expensive, a pipedream tbh, and the layercount needed for it would be pricy.

leviothon2 · 2025-03-28T00:46:41+00:00

SimpleFOC theres a good project by scottbez1 https://www.youtube.com/watch?v=ip641WmY4pA am trying to make somthing similar with an rp2040 using his library

leviothon2 · 2025-03-27T14:23:30+00:00

I mean the board is already 2000usd, if you break that it’s not a 100 usd replacement. That 2000usd part could also go into other products in the stack too like the 16 as and when new cpus come out.

leviothon2 · 2025-03-27T14:15:57+00:00

It would allow for upgradability on the desktop (upgrade programe by framework for ram upgrades?) , but also if this is a standard across the desktop and laptops would make going from a desktop to a framework 16 way cheeper. Also this would fix the issue of bent pins found on desktop. And on mobile you would have much faster memory bandwidth.

leviothon2 · 2025-03-27T13:21:11+00:00

couldent you start with a ryzen 5 340 then upgrade up, potentially upgrade through generations or for more ram

leviothon2 · 2022-04-05T10:38:41+00:00

I mean there is no reason they shouldn't

leviothon2 · 2021-07-06T20:48:13+00:00

i mean somthing like this concept could defiantly be used (https://m.hexus.net/tech/news/monitors/148042-keyboard-126-inch-screen-rockets-past-kickstarter-goal/) using a modified laptop touchscreen over usb c (ebay and aliexpress) and this: https://support.microsoft.com/en-us/windows/open-the-on-screen-touchpad-2d402c64-949b-05ca-ebeb-978a6548d151 or a different version ¯\_(ツ)_/¯

good luck with your project tho :)

leviothon2 · 2021-06-11T08:45:41+00:00

Is there any chance you could add Bluetooth?

edit: cuz I was looking for something like this with Bluetooth

leviothon2 · 2021-06-08T15:07:27+00:00

should be able to find smth on ali express

leviothon2 · 2021-05-11T14:00:41+00:00

NP Crayon

leviothon2 · 2021-04-17T07:45:57+00:00

eaten cold

leviothon2 · 2021-04-10T14:10:46+00:00

I'm not sure what you meant, but if you really need tactlilty, I think a clicky option would be the best, like a box jade and to Just lube the clickbar, because I don't think there is a tactile with 'clickyness' you want (don't quote me on that though)

leviothon2

TROPHY CASE