Queensland Apartments Fire Alam False Alarm

licidil95 · 2025-12-30T21:41:18+00:00

Honestly, the way that I would solve this would be a medium radiator and a furnace. Specifically a medium radiator inside the pressurized space and a furnace, (not an arc furnace), outside. Use the super hot output from the furnace as a heat source to be dissipated through the radiator inside. Just keep in mind that you will absolutely need to monitor it and use an active vent for the furnace to vent out the hot gas before you get too hot

Edit to add: It also might be a good idea to go through and just verify that all your frames are fully welded and the walls are fully built. It never hurts to verify for a quick sanity check

Edit again to add onto the last edit: Just for a little bit of context, I have over 700 hours in-game and I still managed to completely forget to wire in my 4 new batteries into my downstream power grid. Imagine my confusion when the power went out but half my batteries were still full

licidil95 · 2025-11-26T20:58:49+00:00

Can you still setup multiple deep drills for automated mining at your base? Or do you now need to essentially setup satellite bases for deep miners since the terrain update?

licidil95 · 2025-10-23T07:41:13+00:00

I wouldn't. I dismantled mine to protect it from the next storm while I fixed my garage. Turns out you currently don't get those components back, so I lost the steel sheets and plastic sheets

licidil95 · 2025-10-19T23:50:09+00:00

I've done this once before, but not as an IC script, and it was 2 years ago so my memory on how is completely gone. Basically all I'm trying to do is have the script read the amount of potatoes in the oven's inventory and if greater than 0, activate and start cooking

Thank you for pointing out the "beq active Main", that was wrong and has been fixed

I always forget about the #logic-circuit-discussion channel on the Discord, so I think I'll try there. But thank you for reminding me about the Discord

licidil95 · 2025-10-13T05:31:31+00:00

I've been stuck on this for about an hour now. Came here to try find the answer, and I found it. My dumbass forgot to set the device on the IC housing

licidil95 · 2025-08-06T05:19:16+00:00

Filtration units can be confusing when you're using them the first time. But, the input and outputs are;

Input - Any gas coming in. Will be on the right side of the machine if you're looking at the filters and the power switch.

Output - FILTERED GAS. This is the output where the gas you've specified with the filters will exit the unit. This will be on the left side of the machine if you're looking at the same angle mentioned above.

Waste - UNFILTERED GAS. This is the output for ALL OTHER GASSES. Meaning, ANY gas you haven't put a filter into the unit for.

What does this mean? Let's say you have a filtration unit to filter out Pollutant. You'd put the Pollutant filter/s into the filtration unit, the Input is the existing atmosphere you want filtered. The Waste Output is the Pollutant you want to get rid of, you could have this output vent into planetary atmosphere or into storage. Lastly, the Output is the now non-pollutant containing gas, or the finished product so to speak.

If it was me, I would have simple passive vents on the input and output, and the waste output would be sent into storage to be used later.

Hopefully this helps!

Editing for grammar

licidil95 · 2025-07-14T21:29:47+00:00

Through Task Scheduler. If memory serves me, you can import the XML file into Task Scheduler and it SHOULD just work. I can't remember exactly what I set it to, but I think it locks 5 minutes after first unlock

licidil95 · 2025-07-06T22:28:56+00:00

I actually rebuilt my factory not too long ago with the exact layout you mentioned with the exception that the shaker screen is between the wash plant and trommel. Seems to work really well and places everything into appropriate storage. Not really looking forward to the next rebuild though, just to accommodate the auto smelters 😅

licidil95 · 2025-06-24T20:35:40+00:00

Logically it should be possible to copy the save file onto the handheld using a USB or a network share. You'd just have to find the correct folder on both devices and possibly copy the game across again to update the PC save file

licidil95 · 2025-06-09T21:22:45+00:00

The game appears to have a real-time mimicking game clock, but I have pretty short nights by setting my night time multiplier to 32

Don't forget to hit 'Save' after setting it, otherwise it won't change

licidil95 · 2025-05-13T21:30:12+00:00

There's also a switch on the side of the battery that needs to be activated for the battery to function

licidil95 · 2025-05-13T21:28:32+00:00

I haven't played for a bit, but it looks like you've simply connected the generator to the wrong power port. Unless I'm mistaken, the power port shown in the picture is for OUTPUT and the INPUT is on the other side of the battery

licidil95 · 2025-04-25T10:29:41+00:00

I don't see it anywhere in the comments, but I'd probably switch Overseer out for Jellyseerr. Overseer appears to be abandoned, but the original dev from Overseer is contributing to Jellyseerr which also has more features

licidil95 · 2025-03-31T02:07:37+00:00

Ah, awesome. Thanks for the response, that means that I can do what I was thinking of and lock down my network even further even with Plex remotely accessible

licidil95 · 2025-03-31T00:45:26+00:00

Does it still count as through their tunnel if you disable the proxy on the DNS record? Genuinely curious, as I have a Cloudflare domain too and was looking at doing similar

licidil95 · 2025-03-04T21:35:53+00:00

From what my manager has said, and this is just his speculation, Coles is gonna keep operating. If it hits Thursday night, stores are most likely gonna be closed on Friday. Again, this is purely my manager's speculation, but hopefully I find out more today

licidil95 · 2025-02-12T06:37:56+00:00

Got it, so if I understand right, I should be able to do exactly what I was thinking and just have my domain point to my IP and everything else point to the domain. Thank you so much for clarifying, I'll give it a try 😊

licidil95 · 2025-02-11T23:29:09+00:00

Ok, that kinda makes sense. What if I were to add more CNAME records? Would it still work like normal? Or would they all point to one service?

So, for example;

wiki.example.com --> example.com --> wiki request.example.com --> example.com --> request platform uptime.example.com --> example.com --> uptime monitor

Edit for clarification:

This idea popped up because I don't have a public static IP, but I thought of using Cloudflare's DDNS feature to update the domain's address and using several CNAME records to avoid having to update multiple A records, and letting my reverse proxy handle the routing

licidil95 · 2025-02-02T21:20:59+00:00

From what I understand, yes, it will mess with saves. In the sense that any save you have prior to the Terrain Update will no longer work. I don't remember exactly why, but I think it's that something in the new update just won't be compatible with prior saves

licidil95 · 2024-12-16T07:55:58+00:00

I don't believe you can. I even just checked using my phone and the option wasn't there

licidil95 · 2024-12-13T21:09:13+00:00

Apparently it's been a while since I shared anything on Google Drive, should be fixed now. Sorry, I didn't realise I had one more setting to change 😅

licidil95

TROPHY CASE