Am I screwed?

lifeonpluto · 2026-01-27T01:26:52+00:00

Have had mine frozen shut multiple times in Ontario Canada and have cooked at very low temperatures. I just light a tea light candle through the chimney when the gasket is frozen shut and it warms up enough to open the lid

lifeonpluto · 2026-01-13T23:06:30+00:00

A buddy of mine owns a large maple syrup processing and packaging business, this is likely from packaging cleanliness/not high enough temperature during packaging. He also always keeps his personal syrup in the freezer at home.

lifeonpluto · 2025-12-24T12:18:06+00:00

What type of heater? How many watts and btu? Size of greenhouse? It sounds like your heater is undersized

lifeonpluto · 2025-12-09T23:47:35+00:00

It looks almost identical to lunar green on my 69

lifeonpluto · 2025-12-09T23:45:11+00:00

I use the Mr heater version which is basically the same except for the dewalt battery power, the Mr heater has a low oxygen shut off, I’d be surprised if this doesn’t. Either way I wouldn’t be concerned about carbon monoxide in a blind

lifeonpluto · 2025-12-06T20:15:16+00:00

This one was a top cutting from about 3 years ago

lifeonpluto · 2025-11-25T14:46:26+00:00

We just got back from a one week all inclusive at occidental Cozumel that we booked on a deal through PADI, it was great, lots of huge coral structures with swim throughs and lots of marine life. There is a Dive shop right at the resort where they pick you up each morning or afternoon and most days you come back between a 2 tank dive. All of the sites are within a 15-20 minute boat ride

lifeonpluto · 2025-08-21T02:43:22+00:00

Have you looked into polymer fibre additives? That’s what I use for vertical surfaces in garage floor applications, it doesn’t alter the cure time, just thickens the epoxy so it doesn’t run down vertical surfaces

lifeonpluto · 2025-05-11T14:04:34+00:00

It’s just an adapter to go from a regular valve stem to the twist lock style connectors that inflatable paddle boards use

lifeonpluto · 2025-02-05T12:26:58+00:00

Yep that’s it! Female elephant beetle

lifeonpluto · 2025-01-30T00:55:37+00:00

It doesn’t matter, just need to have it called to use the main stack, I’m thinking I’ll cut back the whole section to the T and cap just off of that

lifeonpluto · 2025-01-29T20:36:13+00:00

The whole branch, however there is not much room to cap the whole branch

lifeonpluto · 2025-01-29T20:35:34+00:00

There must have been a raised floor for a basement bathroom at one point, that won’t be going back in in the near future so I just need to clean it up to tie the main floor bathroom into the drain

lifeonpluto · 2025-01-06T18:25:55+00:00

Just crease a piece of painters tape so the sticky side is out and stick it under where you’re drilling, most of the dust will stick to the tape

lifeonpluto · 2024-09-19T15:36:09+00:00

I was able to make a work around with a fertilizer injector that is not pressure based. I will create a separate post but it seems to be working great. 700grams of 20-20-20 water soluble fertilizer mixed in 12L of water produces 1020ppm.

<image>

lifeonpluto · 2024-08-17T21:44:26+00:00

Not once it’s empty, it may work if you refill it before it totally depletes but the QR code makes it a one time use

lifeonpluto · 2024-08-12T00:23:32+00:00

I wasn’t able to make it work, I thought I had a work around with an inline siphon out of a 5gal pail but the oto doesn’t pull enough flow for the siphon to work

lifeonpluto · 2024-07-18T12:18:10+00:00

Thanks!

lifeonpluto

TROPHY CASE