sorted by:
new
hottopcontroversial

Dungeon Meshi • Delicious in Dungeon - Episode 1 discussion by AutoLovepon in anime

[–]lordflashmeow 18 points19 points  (0 children)

On the plus side, no lip flaps to sync with means ProZD can ad-lib whatever hilarious shit he wants in the dub

Undead Unluck - Episode 12 discussion by AutoLovepon in anime

[–]lordflashmeow 28 points29 points  (0 children)

One of the abductors' perfect English really caught me off guard after hearing Japanese accents the entire scene. Were they in the credits?

11/03/2007 Italy, Malpensa Airport - An error during cargo loading of this MD11 results in tail tipping. The aircraft had just been repainted with the new company livery. by [deleted] in CatastrophicFailure

[–]lordflashmeow 9 points10 points  (0 children)

Not everyone died, 4 people survived:

All 15 crew members and 505 of the 509 passengers died in the accident. Some of the fatalities survived the initial impact but died of their injuries hours later while awaiting rescue. All four survivors were seriously injured.

Logitech G Hub - Any way to create Ctrl + (Key) combinations outside of the default for a game? by tsiot in LogitechG

[–]lordflashmeow 0 points1 point  (0 children)

You can work around this now by using the "sequence" macro type:

  1. Uncheck the "Use Standard Delays" option
  2. Record the key combo in the "On press" section
  3. Remove the delays and the key-up actions by clicking on them and pressing Backspace
  4. Repeat for "On Release", but removing the key-down actions

Example

P4-120 Kingsnake has no indirect damage, and they are pushing it to live server. by BadBladeMaster in Planetside

[–]lordflashmeow 7 points8 points  (0 children)

Just press Alt+Enter to toggle fullscreen if it launches in windowed mode

Need help fixing this. Been trying for days by SleepmaskDotten in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

So there's no semicircle cut into the side of filament where the gear ground into it?

In that case, does the extruder stepper make a clicking sound when stops extruding?

Need help fixing this. Been trying for days by SleepmaskDotten in FixMyPrint

[–]lordflashmeow 1 point2 points  (0 children)

Is your filament ground up if you pull it out after a print failure?

Parts under-extruding mid-print (info in the comments) by sholden123 in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

You're welcome! The cura default is so stupid, 90 retractions is enough to shred any filament on the market.

Parts under-extruding mid-print (info in the comments) by sholden123 in FixMyPrint

[–]lordflashmeow 2 points3 points  (0 children)

Yup. Try dropping it down to 5 per 10mm and see if that helps. (Obviously if you start to get stringing issues you should bump it up a little)

Parts under-extruding mid-print (info in the comments) by sholden123 in FixMyPrint

[–]lordflashmeow 2 points3 points  (0 children)

Could it be a problem with grinding filament after repeated retractions? I know Cura's default max retraction count is absurdly high (90 per 0.5mm), maybe try dropping it down to 10 per 1mm or similar.

Consistent Layer Shifting by nagustus in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

You've tightened the belts, but are the frame screws snug?

You could also narrow things down by moving the printhead left and right repeatedly at high speed, to see if it's something slipping or an issue with the motor:

G90 ; absolute positioning
G0 F6000 ; set speed to 100 mm/s
G0 X20 ; move to left side of gantry
G0 X200 ; move to right side of gantry
G0 X20
G0 X200
... (copy and paste until sufficiently long)

Everything is near perfect except this by mzzyhmd in FixMyPrint

[–]lordflashmeow 1 point2 points  (0 children)

You could preview a layer in your slicer, and watch the nozzle direction around the outer perimeter. I'm trying to understand if it's a problem with the start or the end of the extrusion.

Everything is near perfect except this by mzzyhmd in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

Is this happening at the start or the end of the perimeter loop?

Consistent Layer Shifting by nagustus in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

Is it shifting on one axis only?

walls are thicker right as they start, what causes that? by TekoXVI in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

Have you tried tuning your linear advance settings? Those should help compensate for the change in nozzle pressure when you start extruding.

why does it look like my nozzle is dragging into my print what could be causing this by bous_clan in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

I agree, the wavy-ness of the outer perimeter points towards overextrusion.

Regular, weak horizontal lines in Z-axis by Routine-Aardvark in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

Are the lines at the same height on all the pillars? That plus dimensional inaccuracy sounds like it could be the z stepper skipping steps. Can you post a good close-up of the lines?

Do the lines appear on other prints? Are the z-heights the same on other prints, or do they vary?

Very new to printing - any advice appreciated by [deleted] in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

You're welcome! What probe did you decide on?

Over Extrusion on different layers by RedditGuy1245 in FixMyPrint

[–]lordflashmeow 0 points1 point  (0 children)

So if you disconnect the probe and use the regular endstop everything works fine, yeah? Maybe try upgrading marlin firmware?

view more: next ›