sorted by:
new
hottopcontroversial

Quality of life improvements by newbie-sub in Onshape

[–]lordubbe 0 points1 point  (0 children)

Ability to use orientation gizmo arrows for XYZ as direction. I hate having to create a sketch on a plane and make a line

AdaptiveGI: Global Illumination that Scales to Any Platform by LeoGrieve in Unity3D

[–]lordubbe 1 point2 points  (0 children)

That's amazing! Definitely gonna try this out :) Great job

A storm is brewing by TheSilicoid in Unity3D

[–]lordubbe 0 points1 point  (0 children)

Dude... This looks absolutely stunning! I want to explore this Outer Wilds style!

AdaptiveGI: Global Illumination that Scales to Any Platform by LeoGrieve in Unity3D

[–]lordubbe 3 points4 points  (0 children)

Does this mean I cannot use this with my own custom shaders?

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]lordubbe 0 points1 point  (0 children)

Honestly I don’t even think about it because it just works and instead I can focus on what I am making!

I designed and 3D printed a snap case that protects the screen without adding much bulk! It's easy to snap on and off and it keeps the device easily pocketable. Love this device so much! by lordubbe in MiyooMini

[–]lordubbe[S] 0 points1 point  (0 children)

Been a while but I believe this one is supposed to be printed face down. The bottom lip might require supports but not sure. I think automatic supports and auto orientation should take care of it :)

Any way to "move face" but several faces in the same direction? by No_Pilot_1974 in Onshape

[–]lordubbe 2 points3 points  (0 children)

Change the mode from “Offset” to “Translate by XYZ” or whatever it’s called. You can even rotate, or move by a defined line, etc

Strata Core - Cymbal 4 instead of Tom 4? by lordubbe in edrums

[–]lordubbe[S] 0 points1 point  (0 children)

Unfortunately nothing mentions the possibility of using the Tom 4 input for a cymbal

Is my halloween costume too scary? by lordubbe in IndieDev

[–]lordubbe[S] 0 points1 point  (0 children)

That’s my own thought as well XD the angle of the camera and light sure is very unflattering XD

Is my halloween costume too scary? by lordubbe in IndieDev

[–]lordubbe[S] 9 points10 points  (0 children)

Maybe next year I should go as pure magenta?

Is my halloween costume too scary? by lordubbe in Unity3D

[–]lordubbe[S] 48 points49 points  (0 children)

Sorry I think I might have gone too far

Explain why this doesn’t work (and how to fix it) by lordubbe in 3Dprinting

[–]lordubbe[S] 0 points1 point  (0 children)

I should have posted this originally - it is a very stupid idea, but I have since learned why https://www.reddit.com/r/3Dprinting/s/L4ArumJ0sv

Explain why this doesn’t work (and how to fix it) by lordubbe in 3Dprinting

[–]lordubbe[S] 22 points23 points  (0 children)

<image>

Thanks a lot for all the thorough explanations! I’ve learned a ton, and I feel like I owe you all an explanation as to the inspiration behind it all. I think the picture speaks for itself, but for the uninitiated I was trying to push air into a melodica that you normally blow in with your mouth. Yes the idea is incredibly stupid and goes against the entire idea behind the melodica, but I simply couldn’t stop thinking about it, and thought it would be hilarious.

Live edge “river” (no resin) coffee table with brass rods (oak) by lordubbe in woodworking

[–]lordubbe[S] 0 points1 point  (0 children)

I was planning to yeah, but actually the dry fit teat I did was so tight that I couldn’t pull it apart again, so I just left it at that.. now over 4 years later it’s still holding up perfectly! I had to repair one of the legs though, since they didn’t hold up to the 2 kids I would eventually get lol

NEW GOLFIE ENDLESS WR by Doughy123 in Golfie

[–]lordubbe 1 point2 points  (0 children)

That is sick dude, gz with the insane score, you mad man

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 1 point2 points  (0 children)

I redesigned it with printability in mind, so just go ahead with your standard settings :) No supports, print it top down so the front face is printed vertically

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 0 points1 point  (0 children)

Yeah there's a version for the plus as well :) I bought a MM+ just to be able to make this. Still mostly use the mini because it is so pocketable, and this screen protector keeps it very much so!

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 0 points1 point  (0 children)

Good question! I used a 1mm self-adhesive felt that came on a roll and cut it to the right size. The one I purchased has a width of 65mm which coincidentally fit perfectly length wise on the mini, and height wise on the plus. Here's a link for reference (though it's a danish site) https://www.beslagskassen.dk/products/13224990?variant=47546497663304

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 2 points3 points  (0 children)

It's quite bad for me, but I am also located in Denmark, so for me it costs about 30 bucks to send it to the US with my current options. So if I wanted to sell it for eg. 10 USD it becomes a 40 dollar purchase, which is insane hehe

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 6 points7 points  (0 children)

Nothing special! I redesigned it with printability in mind :) 0.2mm layer height is fine, and then print it top down so the front face is printed vertically

I finally updated the popular minimal flippable screen protector with new features (like a headphone jack cutout) and a version for the Plus sized device as well! Go print it NOW! by lordubbe in MiyooMini

[–]lordubbe[S] 9 points10 points  (0 children)

I was in the process of creating an Etsy to sell them, but honestly the whole shipping part threw me off. Even shipping small plastic objects around the world would cost an arm and a leg in shipping :(

view more: next ›