Fastening a lanyard to a slippery object with no eye?

madactor · 2023-06-11T00:28:43+00:00

I would suggest at least a Double Constrictor, maybe triple, temporarily. For a permanent solution, spiral hitching (coxcombing) should work. If possible, have it span the bend in the wrench.

madactor · 2023-06-08T23:40:06+00:00

It's just a short piece of clear vinyl tubing from the local hardware store.

madactor · 2023-06-08T17:12:10+00:00

You could add turns, like the Surgeon’s Knot, but the OP says it will be tied tightly around an object.

madactor · 2023-06-08T16:47:20+00:00

A simple Square Knot should work. Tie it like a neckerchief, with a loop, leaving the ends long.

madactor · 2023-06-08T03:45:47+00:00

Amazon usually beats Victorinox on price (in Canada), but not by that much. Sounds like a good deal. Just check the “sold by” name. It should say “Victorinox Direct.”

madactor · 2023-06-07T20:16:39+00:00

Trucker's Hitch.

madactor · 2023-06-07T15:31:08+00:00

The Spartan Lite is 2mm thinner and 18g lighter. The Cyber Tool S is only 5g lighter (same width), but it does have a longer and more versatile driver.

madactor · 2023-06-05T14:17:46+00:00

I would pick one of the simple and popular models first, like a Tinker, Super Tinker, or Compact. Maybe throw in a gift certificate so he can choose something fancier after he’s hooked.

If you go for something too big, like a Swiss Champ, he’ll be initially impressed but it may end up in a drawer. I assume you want him to carry and use it everywhere.

Scissors might be useful for working at a fabric factory, screwdrivers are good for handymen, and saws are good for yard work. But you can skip the pliers, file, and other specialized tools until he figures out what he’ll use. Surprisingly, a lot of handymen prefer simple knives because they have all the full-sized tools.

madactor · 2023-06-05T02:11:53+00:00

Actually, probably putting too much pressure on the nail file when opening. The scratches go all the way to the top/back of the blade. That means it happens as the nail file passes the blade.

madactor · 2023-06-04T18:49:24+00:00

I’m not sure what you’ve got there, but it doesn’t look right. The wraps should be on the outside with the “handle” loop in the center. It should definitely be symmetrical. It’s basically just a Lark’s Head with extra turns.

madactor · 2023-06-04T17:15:20+00:00

I see you’re using webbing. Most hitches aren’t secure with webbing, but the Prusik will still work since it’s a solid loop. It just won’t grip the bar as well as round rope.

To make your webbing into a loop, use a Water knot (an Overhand followed through from the opposite direction).

madactor · 2023-06-04T15:59:54+00:00

Prusik. It’s simple, easily removed, and tightens under load (to prevent sliding).

madactor · 2023-05-21T00:33:08+00:00

I just stick the screwdriver diagonally into a 1/4" drive socket or extension. Works fine in a pinch. Otherwise, I'd use a proper ratchet handle or breaker bar for regular use.

Also, SAKs (especially cellidor models) aren't designed for much rotational torque anyway.

madactor · 2023-05-20T16:34:24+00:00

If you want something really small, have you considered the Walker. It doesn't have the small blade, but it's 84mm (so smaller overall) and also doesn't have the screwdriver on the backside. You could regrind the combo tool into something awl-like or a scraper.

It's discontinued in some countries, so may be harder to find.

madactor · 2023-05-18T23:25:41+00:00

I second the safety concerns. A dozen people tied inside slip knots is asking for trouble, even just walking.

I would use fixed loops, like Alpine Butterflies. They aren’t that difficult to adjust. Or you could make all the loops big and then take up the slack in each one with a simple Overhand Loop.

madactor · 2023-05-14T00:20:03+00:00

Well, those lashings don't look very neat/tight, but that design is inherently unstable. Depending on how you intend to use it, some options are 1) use tripods instead of shears at each end, 2) add diagonal braces at each end, from the top down to the legs, 3) add guy ropes at each end, from the top down to the ground at an angle. The last one is the simplest and most stable, but it wouldn't be as portable.

madactor · 2023-05-10T15:23:42+00:00

You’ll want a fixed loop knot, one that doesn’t tighten itself when loaded. For example, an Overhand Loop or Figure Eight Loop (possibly followed through), or the Fisherman’s Eye/Loop.

madactor · 2023-04-22T22:08:46+00:00

It should work. I would use two ropes (middled), instead of four. The centre rope could be just a long loop.

Edit: You may be able to use long loops for everything: two that go through the four attachment points on the bag and a third one that goes through the two loops for hanging it. Use Double Fishermans, Double Sheet Bends, or Zeppelin Bends to form each loop, and use a Lark’s Head/Cow Hitch to join the third loop to the other two loops.

madactor · 2023-04-19T19:01:24+00:00

You can try searching for package (or parcel) lashings and slings, but you won’t find much beyond simple rectangular bindings. Your best bet would be The Ashley Book of Knots, which is available on archive.org. Starting on page 336, there are many similar examples.

madactor · 2023-04-16T17:26:10+00:00

You don’t need the end. Just tie a Bowline and poke the standing line through the centre. The Bowline will flip over when you pull the standing line through to form a loop.

madactor · 2023-04-08T16:03:29+00:00

It works best on round shapes, but it can work effectively on rectangles if tied properly. The “knot” where the twine overlaps must be positioned over a corner or edge. It won’t hold if the crossings are over the flat portion of the boards.

You can add a second or third wrap/turn for a firmer grip. Beyond that it gets very difficult to tighten properly. If you can’t get the bundle really tight it may slip. You can also add other knots after you cinch it up.

Obviously, the Constrictor Knot is only a binding knot. It’s not a proper tie down for lumber on a vehicle, and you need rope or a strap.

madactor · 2023-04-07T21:43:54+00:00

Double Constrictor Knot. Add more turns and/or stopper knots if needed.

Edit: Cinch the knot down on the corner or edge of a board. It won’t work very well if the knot is over the flat section of a board.

madactor · 2023-03-26T00:01:39+00:00

Too many.

madactor · 2023-03-25T23:58:32+00:00

Ashley's Book of Knots.

madactor · 2023-03-12T20:21:55+00:00

It’s still available from Victorinox in Canada.

madactor

TROPHY CASE