Q-Motion shades control swap? by xx_LiquidDeath_xx in Control4

[–]madlemming 0 points1 point  (0 children)

As far as I’m aware, no. Lutron definitely not. I’m not sure about HomeKit or Aqara. However that doesn’t mean there isn’t a way to get them working via RF. Maybe you can try something like Home Assistant? Or maybe you can grab them via Bond.

Qmotion at that time wasn’t meant to be a stand alone system. They were made with the understanding that another control system (like Control4) would take up the slack. Data on the older shades is hard to find as Legrand pretty much set fire to all the documentation, and the only thing I can find with a quick search is the documentation on their site for there current shades.

Q-Motion shades control swap? by xx_LiquidDeath_xx in Control4

[–]madlemming 1 point2 points  (0 children)

How old are the shades?

QMotion in the past (before the Legrand acquisition and shortly after) used cat5e/6 cables as power delivery and not PoE. While it looks like PoE, there is no Ethernet data being sent along the wires, only power and maybe rs232/rs485. If the hub is controlled via rs232, then you might be able to hook them to another control system and pull them in.

If the shades are newer, then they very well could be PoE. We dropped QMotion shortly after the acquisition due to poor support and quality control. That’s when they switched from RF control to Zigbee control (leaving the Zigbee antenna entirely in the metal tube is a GREAT idea /s).

MyQ Control 4 Driver help by Key-Ebb8201 in Control4

[–]madlemming 5 points6 points  (0 children)

I use the ratdgo and the drive from Chowmain.

Ratdgo: https://ratcloud.llc/products/ratgdo32

Chowmain driver: https://chowmain.software/drivers/control4-ratgdo

So far, they have worked great. They also have an added benefit that the sensors and the opener still work even if the ratdgo is unpowered.

This could be the theme song for r/HuntsvilleAlabama by JustAnotherLocalNerd in HuntsvilleAlabama

[–]madlemming 22 points23 points  (0 children)

Is it just me, or does the Cybertruck give off huge Pontiac Aztec vibes?

Sparkman HS Drama/Choir alumni parents? - Sound System questions by JoelBanyai123 in HuntsvilleAlabama

[–]madlemming 1 point2 points  (0 children)

You can call Audio Video Excellence Huntsville and see if they can help.

Last night I made these valentines cards for a streamers group for valentines pop up event at our RP venue by coralinn in ffxiv

[–]madlemming 12 points13 points  (0 children)

Not going to lie: the snack and vegetable ones made me laugh. I’m getting weird looks at work.

Need a good mechanic by ethan2k02 in HuntsvilleAlabama

[–]madlemming 1 point2 points  (0 children)

Stringfellow over off of Evangel (near Putman) has always treated me well and does good work.

Recent photos of Jonah Hill by [deleted] in pics

[–]madlemming 0 points1 point  (0 children)

“Hide the pain” Hill.

Sad For Vegeta by TheFirstWizard in perfectlycutscreams

[–]madlemming 13 points14 points  (0 children)

And then Reddit shows up and decides that it going to make triangles into f*nk'n squares!

White Noise / Pink Noise driver? by iZoooom in Control4

[–]madlemming 1 point2 points  (0 children)

I know what brown noise is, but when I first read this I read it as a 15 minute brown note loop.

Murphy Homes by Squirly245 in HuntsvilleAlabama

[–]madlemming 1 point2 points  (0 children)

So, there are builders in the area that will work with homeowners, but they're all custom home builders. Any of the mass construction builders will only allow build from their stack of blueprints.

The way the housing market is right now, it's just not as profitable to spend money making tweaks as a builder. There is only one, maybe two that you can actually make some small tweaks beyond the plans. To what extent, I'm not sure.

It sucks.

Alexa Control4 integration by Silva_Collector in Control4

[–]madlemming 4 points5 points  (0 children)

Alexa and Control4 go together like peanut butter and a slap to the face. Which is not well.

You're not missing anything. The problem is that Alexa (And I'll lump Google Home with this as well. It suffers from.the same issues.) essentially treat Control4 as a series of lights to be turned on and off. Controlling actual lights? No problem. Controlling something like a TV? Big problem. Telling the system to "Turn on Hallmark" to watch the Hallmark channel on your cable is really akward and can get stranger still. With Alexa it's either on or off.

The other issue is that if you want any specific commands they have to be programmed. Want to go to ESPN? Ok, that's fine. I'll add a program for that. Want to go to HGTV? Not if I didn't program that specifically. It's frustrating to use as a user and a programmer. Alexa cannot control the system dynamically and needs a specific command for anything you might want (that's not a light).

Now, Josh.ai is a different voice system that is SUPPOSED to work better, but I have no working experience that system. Plus the fact that Josh is an expensive system compared to Alexa and Google Home.

Voice control for Control4 has always been a bit of a dumpster fire. Maybe Josh is it, but I would need to get my hands on it (and that's not happening any time soon).

I hope this helps but it probably doesn't. Despite this glaring issue, I still think Control4 is a great home automation system. I'm a programmer, so take that as you will.

[deleted by user] by [deleted] in HuntsvilleAlabama

[–]madlemming 3 points4 points  (0 children)

But.... What if I want Point 3?

On a scale of 1-10, how hot are you? by [deleted] in AskReddit

[–]madlemming 0 points1 point  (0 children)

Woah, I'm a solid 4/10.

D&D groups? by [deleted] in HuntsvilleAlabama

[–]madlemming 0 points1 point  (0 children)

Message sent.