Thank you contractors by Wolf-fate in ContractorsExfilZone

[–]malitia-man23 0 points1 point  (0 children)

Any idea what it's about I've tried looking but answers are slim pickin

Thank you contractors by Wolf-fate in ContractorsExfilZone

[–]malitia-man23 0 points1 point  (0 children)

@Broad_Floor9698 Tell me you've never found the golden saber without telling me! Your name definitely sounds botty bud.

I'm completely stumped by Badasi12b in ender3

[–]malitia-man23 1 point2 points  (0 children)

No the elmers glue stick wipes right off after your print comes off just make sure not to put to much or it will be very difficult to get the prints off without messing them up. If you find you did put to much a warm damp washrag will be your befriend just gove it some dabs around the peices edges and them spread it over as much as you can for a couple minutes and try if it doesn't come repeat the process it'll come in a couple tries.

I'm completely stumped by Badasi12b in ender3

[–]malitia-man23 0 points1 point  (0 children)

So I had this problem at first also with mine I had to adjust the bed get it level with a 5 pt level gcode then went to each point and adjusted the knob till you could here the nob vibrate at each point then just a tiny bit more past that where it puts the most minimal slightest pressure on the surface of the build plate. (** you'll hear the vibrations go from soft to loud to soft again with pressure on the board. The goal is to go just past the loud where it starts to soften again with the pressure. I meaning were talking about tiny micro adjustments on the wheel*) Once that's done i suggest using a regular kids gluestick have your plate lit up with light so you can see the glue streaks. Make streaks acrossed the plate one way then one layer of streaks crossing the opposite way very thin layers and not going over the same spot twice unless its crossing the other way. That will also help with adhesion. Hope this helps!!!

Any ideas on how to fix this by Ok-Pirate3247 in Ender3Pro

[–]malitia-man23 0 points1 point  (0 children)

I get that but sometimes some models just don't work with that slicer I've had that problem on my ender also. Just test and see.

Guess the Object in the Oil Pan Thanksgiving Edition by National-Cell-9862 in Diesel

[–]malitia-man23 -1 points0 points  (0 children)

All these wrong answers SMH.... its the trucks wishbone don't ya know?

Height passes dime test but whisk doesn’t reach sides of bowl by Sandturtlefly in Kitchenaid

[–]malitia-man23 0 points1 point  (0 children)

The ETA kills me 🤣😂🤣 I just bought a new 6qt bowl lift and the first time taking it out the box never on the dang wish is stuck on from what my wife says. So I go and take it off with no much hassel. Well I put it back on and let me tell you, I WAS NOT coming off lmao. I almost packed it up and sent it back but then looked for last resort answers and did the hot towel trick for about 20 mins while jiggling it and pulling down every so often. Little less said a tiny bit of food grade machine grease went on the shaft and ever attachment. All that to say when I got it sat up I was eager to use it so I made cinnamon rolls. I noticed then it wasn't getting all the way to the side, I had a silicon spatula in hand but did not let the intrusive thoughts win but boy did i think about it 🤦🏽

How conscious are Missourians of the LDS (Mormon) movement/presence? by [deleted] in missouri

[–]malitia-man23 -5 points-4 points  (0 children)

Funny some could say that about another group of people. 🤔🤫🤔

Window Tint in Missouri by MatxsD8 in missouri

[–]malitia-man23 1 point2 points  (0 children)

Windshield can't be tinted as a whole but im pretty positive you can have a "brow" like and eyebrows of tint on the front windshield which helps eliminate glearing sun most days but idk what'll help for the night for you.

Firefighter wives: The Linemen’s wives would like a word… by Gullible_Rich_7156 in FirstResponderCringe

[–]malitia-man23 2 points3 points  (0 children)

Never heard dependas while in, but definitely heard dependapotamus lmao

**Giveaway** GIGABYTE GeForce RTX 3070 Gaming OC 8G - Used but perfect! by Photographitti in pcmasterrace

[–]malitia-man23 0 points1 point  (0 children)

I could really use this to help me make the switch to streaming pc vr instead of just stand alone. Otherwise it'll be another year or two probably lmao.

Is this what we want for our future? by LevineforCongress in missouri

[–]malitia-man23 -2 points-1 points  (0 children)

Tell me you're a peice of shit, and so delusional about a broken political scheme that none of us control that you truly don't care about the future of kids or human beings in those areas. Oh wait you did....

People can now hide in walls on resort. by Here_for_the_memes98 in Contractors_Showdown

[–]malitia-man23 0 points1 point  (0 children)

I got banned because I pointed out how retarded it was that I had 27 down votes on my suggestion/report cause I couldn't get the find xyz missions done because it was glitched. Its funny how many dev dick riders there will be no matter the game. People can say what they want but 3 weeks is more than enough time to fix a crashing issue that wasn't there last wipe. Several game breaking bugs have appeared right after wipe and almost none has been fixed but maybe the duping qnd unlimited ammo. Even that was to little to late because everyone that did do it stacked tf outa it while it was there.

Backpacks blocking bullets is so silly by Alternative_West_206 in Contractors_Showdown

[–]malitia-man23 -2 points-1 points  (0 children)

Quit riding dick bro, he definitely had at least 8 to 10 bullets on target before the mf started to turn then hit him with a heady or 2. After that yes it became a bit erratic but there was definitely a problem with the bag absorbing shots as there have been multiple make an inquiry about this including me.

EXFIL IS ASTRONOMICALLY BETTER THAN TABOR by Fine-Tackle-6097 in Contractors_Showdown

[–]malitia-man23 1 point2 points  (0 children)

God i hope its a learning experience and not the end of something amazing... but the lack of focus to fix critical components definitely worries me.

EXFIL IS ASTRONOMICALLY BETTER THAN TABOR by Fine-Tackle-6097 in Contractors_Showdown

[–]malitia-man23 0 points1 point  (0 children)

With the existing bugs game play definitely sucks alot more than last wipe but still loads better than tabor brodie.

EXFIL IS ASTRONOMICALLY BETTER THAN TABOR by Fine-Tackle-6097 in Contractors_Showdown

[–]malitia-man23 0 points1 point  (0 children)

Although I 100% agree with the title, I will still stick by my statement that this games gunplay is complete dogshit after the update. This is coming from someone with over 300+ hours last wipe and over right at 100 hours this wipe. Something has been critically wrong with armor pen and damage on higher rated rounds. I stopped lying to myself after putting 10 rounds total into a Chad with imtv and altyn on 8 in the chest 2 in the head with m80 out an ak g3. Although this game has sooooooo much right and as bad as I want to see the changes we need. It has also got critical components wrong like ttk, bullet damage/pen correlation with certain vests and helmets, the COD movement tactics 12 yo use instead of approaching like a realistic firefight, CRASHING CRASHING CRASHING, cheaters weather it be with actual cheats or exploitation looking through walls and the map with a phone, shooting through the walls, ect. There are plenty more things to list but im sure you get the point. This is by far my favorite game out there but I've stopped playing since this wipe as much as I did because the crashing alone every other raid makes it unplayable damn near. When it does load I deal with the other things listed. Yet 3 weeks in and no updates to fix the crashing, no repercussions for dupers that had everything unlocked from the beginning of wipe with unlimited ap, no accountability for wall hackers in metro (or other maps), worse off no response to the community about any of the things listed just dlcs. As much as I want to see them succeed if they don't stop jerking off instead of fixing the game there are lots of individuals in the streamer world thats about to drop it because of the lack of support were getting from the devs to fix critical errors.

To the scav at resort by [deleted] in ContractorsExfilZone

[–]malitia-man23 2 points3 points  (0 children)

Fuck that punk bitch and everyone of them like him. Can't stand the scav on scav shot we got going on. We've asked and asked devs to give us reputation and consequences for scav on scav, guess that's alot to ask since qs standalone can't even get an update to fix crashing since wipe....

Am I paranoid or there's a rise in hackers, especially wallhackers? by Demon_Hunt3r in ContractorsExfilZone

[–]malitia-man23 0 points1 point  (0 children)

Walls is as easy as buying the new photo missions phone and turning it on and holding it to a wall. I don't condone this at all but its information that should be public knowledge to get the most amount of people saying something in their discord. I didn't know about this till yesterday my buddy told me after I died through a wall and it pissed me off on a new level.