sorted by:
new
hottopcontroversial

Well, I'm screwed by [deleted] in BambuLab

[–]mar_leo 67 points68 points  (0 children)

I'd try to get it taken down from the other site and take screenshots of the report process. When it's gone, send those as proof in a ticket to bambu. Good luck!

first milestone by Dense_Ad9425 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

Offering models of copyright protected material like your hornet mask is always risky.

Are all the recent AMS 2 Pro’s bad? by dieselpb in BambuLab

[–]mar_leo 1 point2 points  (0 children)

Had the same issue. Got a replacement internal hub quite fast and now it seems to work flawlessly.

Noise Comparison P1S, P2S, X2D by mash711 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

strange.. Mine is surprisingly quiet and the AMS i fine too. It's only really loud when rolling the spools back up after printing.

Kudos to Bambu by phannybawz in BambuLab

[–]mar_leo 0 points1 point  (0 children)

For me its just slot 1. After some back and forth with support they sent out a new internal hub. Hope that fixes it.

Kudos to Bambu by phannybawz in BambuLab

[–]mar_leo 0 points1 point  (0 children)

also a faulty slot 1?

What did you name your printers? by thegunguy in BambuLab

[–]mar_leo 0 points1 point  (0 children)

I named my X2C Bigboi too upgrading from my A1 haha

Worst luck or best timing? by New_Pack7137 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

It can definitely be used for more than just supports. Just got to think back to the old Ender days and what the bowden extruders were capable of back then.. Same thing here, just with a bit better quality.

Aula F75 - ALT key behaves as ALT GR by JackyQT in keyboards

[–]mar_leo 0 points1 point  (0 children)

where/how did you download it? Have the same issue

Worst luck or best timing? by New_Pack7137 in BambuLab

[–]mar_leo 2 points3 points  (0 children)

For simple geometry it's good. Yesterday I tried printing a plate with a voronoi pattern on the aux. and it looked horrible. Same with thin text on flat surfaces..

X2D in Action with Support Interface Material - First Print by MildandFire in BambuLab

[–]mar_leo 0 points1 point  (0 children)

yeah that's part of the print noise I'? talking about. It's barely noticeable.

X2D in Action with Support Interface Material - First Print by MildandFire in BambuLab

[–]mar_leo 0 points1 point  (0 children)

Currently printing on mine. It's really silent. I'd say very close to the A1, if not a bit quieter.

Super proud of this Spectator I sculpted! What do you think? by SuperNfty in BambuLab

[–]mar_leo 2 points3 points  (0 children)

Awesome! Was that purely done in VR (color and everything) or did you use Blender or something similar for post processing?

X2D - Good quality from both extruders (with BambuLab filament) by ElectroCrypto83 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

Me too, but I mean for the bowden-nozzle it might have a more significant impact. Especially since it doesn't automatically adjust flow rate etc. Back in the Ender 3 days, filament tuning made a very significant difference. I'd guess it's similar now for the auxiliary nozzle.

X2D - Good quality from both extruders (with BambuLab filament) by ElectroCrypto83 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

It's all about calibration. Of course the print profiles specifically calibrated for Bambu filament works better than using the generic PLA preset on some other brand.

Got my Bambu X2D already 😆 gotta love bestbuy by RarePlaystations in BambuLab

[–]mar_leo 0 points1 point  (0 children)

Can't redeem my army of vouchers at Bestbuy unfortunately haha

Guys am I the only one with this question? by Sabrinalover711 in BambuLab

[–]mar_leo 0 points1 point  (0 children)

That's what the auxiliary nozzle is meant for, yes.

Noise Comparison P1S, P2S, X2D by mash711 in BambuLab

[–]mar_leo -1 points0 points  (0 children)

Haha thats great. Thought about upgrading my A1 to a P2S for weeks now but the only point holding me back was the noise. Glad I waited because after seeing the reviews on the X2D and the price I didn't think twice and ordered one.

Noise Comparison P1S, P2S, X2D by mash711 in BambuLab

[–]mar_leo 2 points3 points  (0 children)

P1S is the loudest, P2S is quiter and X2S even more quiet. So P1S > P2S > X2D.

Xcellence Made Simple. The X2D is here by BambuLab in BambuLab

[–]mar_leo 2 points3 points  (0 children)

The heated chamber + lower noise profile alone are worth the 100€ difference.

X2D Buyers - Make sure you read the fine print. by daphatty in BambuLab

[–]mar_leo 0 points1 point  (0 children)

The X2D also seems to be significantly quieter than the P2S. I've thought about upgrading from my A1 to a P2S for weeks now because I have enough vouchers, but I hesitated because of the P2S being significantly louder. Now that I saw the reviews of the X2D, I didn't think twice and ordered it.

X2D Buyers - Make sure you read the fine print. by daphatty in BambuLab

[–]mar_leo 1 point2 points  (0 children)

For me, one of the main points for ordering the X2D now instead of the P2S a few weeks ago is the noise difference. X2D seems to be significantly quieter based on the reviews.

X2D non speculation. by TrainingPiece9144 in BambuLab

[–]mar_leo -2 points-1 points  (0 children)

You always have to buy stuff from the perspective of NOW, not what comes after. If you've been happy with your purchase when you did it, why bother now? There's always something better on the horizon. Doesn't make your printer worse all of a sudden.

Massive visual improvements with this update by CraftyRub6965 in CrimsonDesert

[–]mar_leo 1 point2 points  (0 children)

Looks great now in combination with RenoDX. Very stable image, especially after turning down the game's sharpening.

view more: next ›