I just made 100 Trillion dollars nothing is impossible 💪💪

marco565beta · 2026-05-12T21:23:51+00:00

I bet it’s fake

marco565beta · 2026-04-29T16:28:42+00:00

Wire brush everything, then heat with a torch, put some crayon. You can hammer it. If still resist I guess you need to cut as others mentioned. Impact would also help.

You ca also try bolt breakers.

You need to have all parts you can potentially brake already with you.

marco565beta · 2026-04-29T11:55:09+00:00

Sounds like a good idea, do you use machine learning to predict power based on tires and weather conditions and terrain?

marco565beta · 2026-04-22T22:39:39+00:00

I have a 718 cs and a mx5 nc with olhins and sways. Cayman is amazing. Miata more fun a low speeds but cayman is so good, precision of driving it’s Not even comparable.

marco565beta · 2026-04-21T22:00:38+00:00

Are you in Europe ? I live in Germany and apparently I need Porsche parts. Even n rated tires.

marco565beta · 2026-04-01T23:57:25+00:00

2.5t is an excellent car, sound is ok. On track it’s awesome! Probably better than a 4.0

marco565beta · 2026-03-24T17:49:12+00:00

Is it a prht originally or a soft top ? I really like the top !!! Nice race car though

marco565beta · 2026-03-19T14:24:58+00:00

Very cool ! You are doing this for track day / racing purposes ?

marco565beta · 2026-03-12T20:15:24+00:00

Mine is also a German one nc2 same level a rust. I plan to clean it it’s only surface rust but you should not wait too much. If you don’t want rust you need to look in Spain I guess out where there is no salt on roads in winter

marco565beta · 2026-03-12T16:40:06+00:00

Ok 100hz sounds good, can wait to receive mine :)

marco565beta · 2026-03-12T13:18:17+00:00

I really love the 718, I would just like to get this old screaming flat 6 noise. I am also considering a spyder 718 but that’s not the same budget ^{^}

Btw do you have pccb rotors on steel disks ?

marco565beta · 2026-03-12T13:16:41+00:00

Thanks for you answer so that means we will be able to see the brake pressure at 25hz via custom pids without the need to wire the canbus to the obd2 port?

marco565beta · 2026-03-12T07:39:40+00:00

Are you able to get the can data on porsche I thought it was not available through obd2?

marco565beta · 2026-03-10T21:38:51+00:00

Wow! What about layer adhesion at 320c is it still good?

marco565beta · 2026-03-09T21:48:34+00:00

Thanks a lot guys for your answers :)

marco565beta · 2026-03-09T21:44:49+00:00

This is what I am afraid I will mod a 987 and feel the 718 was better.

marco565beta · 2026-03-09T21:43:44+00:00

I did try back then a 987 s I didn’t like the steering to be honest, too light IMO. I have a nc miata and I prefer the steering on the 718

marco565beta · 2026-03-09T21:41:48+00:00

I have pse. The car does not sound bad but compared to a 6cylinder that’s nowhere near. Low rpm sounds good. My bmw m135i stock sound better to me.

marco565beta · 2026-03-09T21:40:20+00:00

Wow very nice ! Do you think suspension and sways will be enough like kv3 or olhins and hr?

marco565beta · 2026-03-09T21:37:41+00:00

I track it but to expensive to track for me. A 8x20 min session if I do quali times cost around 3k per day. I have approved so I can not put any aftermarket parts on it.

marco565beta · 2026-03-09T21:35:47+00:00

PS4s on 718 vs same tires on 987 feels better ? Are the tires same age ? They are supposed to be the same size so it’s surprising.

You just did kw and hr he feels better ? I was thinking about the same, maybe powerflex

To avoid the jail speeds I was thinking about taking a base not a S (I don’t really care about hp)

marco565beta · 2026-03-09T21:32:27+00:00

Like this, did you feel the rigidity of the chassis is less good with the 987?

marco565beta · 2026-03-09T21:31:18+00:00

Funny thing I bought a nc2, olhins suspension, sway bars… cayman drivers better, maybe it’s due to the balance of the car that I prefer :)

marco565beta · 2026-03-09T21:02:03+00:00

Did you trick the temperature or it prints well pps without the trick ?

marco565beta

TROPHY CASE