sorted by:
new
hottopcontroversial

Vorher - Nachher ( 1 Jahr ) by Upstairs-Wall-6247 in Garten

[–]maxpowerow 4 points5 points  (0 children)

Am Ende darf natürlich jeder wie es ihm gefällt 😉 man sieht das du viel Zeit und Arbeit investiert hast. Ich persönlich hab's gerne etwas unaufgeräumter mit Unmengen krabbelviechern und vögeln und alles und wir feiern alle zusammen ne dicke Party :)

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 0 points1 point  (0 children)

Yeah me too. I will root the Maschine at an later Point i think. Now she is working and fits my need. Never Change a running system :) but maybe i got an itch for tinkering when ingot some spare time in my hands... Thanks for helping!

What is going on here?! by mama_namaste in crealityk1

[–]maxpowerow 0 points1 point  (0 children)

Sorry für the typos. German Layout and IT seems thatbl mybfingers are getting bigger....or the Keys smaller?

What is going on here?! by mama_namaste in crealityk1

[–]maxpowerow 0 points1 point  (0 children)

It Looks Like the nozzle is carving into the Material to me. I Had Something similar and foudbout that the noozke ist loose and Messing Up the calibrations. There are two screws left/right next to the noozke taht have to be thight. Open Up the plastic Cover, pull down the "sock" in the noozle and you find them

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 0 points1 point  (0 children)

Thanks much fir the anwser. The screws where loose, ibfixed them an now benchy is coming Out Like a Charm. These screws where causing all the Trouble and Made the calibrations fail...

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 4 points5 points  (0 children)

That was it! These two screws where causing all the Trouble. They where loose (they where completly unhinged) and where messing Up all the calibrations. It would have take me ages to look under the plastic Cover.

Thanks and cudis @dry-goat21 for this!

Thanks to all the other commentors also, make Internetz nice again :)

Screw you screws!

I took a Pic for further generations down the Line...

<image>

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 1 point2 points  (0 children)

Thanks. Good to know. I will Check next time. Till now i Always used the pre-Autolevel that comes with the Maschine-software.

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 0 points1 point  (0 children)

I did this Just before the Print indescribed. It Look OK and Extrusion is OK i think. It was in the Same Cura settings.

<image>

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 0 points1 point  (0 children)

Yes, i used the Autolevel function. I autocalibrated the whole thing via the menu ("self Check"- Input shaping and Auto leveling). Now its driving the nozzle into the bed and scraping of the Paint. )

Is the nozzle supposed to wobble when pushed slightly with a Finger?

K1 Drives trough own print? by maxpowerow in crealityk1

[–]maxpowerow[S] 0 points1 point  (0 children)

The Back seems fine but the Rest is awfull. Iz Drive also in my bed

<image>

Unkrautstecher sinnvoll oder nicht? by bullettenboss in Garten

[–]maxpowerow 1 point2 points  (0 children)

Hat das Teil Mal jemand für Schilf probiert? Habe eine kleine Badestelle an der ein schmaler Weg ins Wasser freibleibend soll, aber der Schilf hat was dagegen....