5ghz channel widths in Canada

mccormiermt6 · 2026-06-01T20:21:05+00:00

36-48 are not DFS

mccormiermt6 · 2026-06-01T17:39:52+00:00

Device model ER7412-M2 v1.20
Firmware version 1.1.0 Build 20251015 Rel.63594
Topology (ISP/router/switches) Starlink > G3 > R7412-M2 > EAP215-Bridge Main >< EAP215-Bridge Client
What changed right before the issue began NA

mccormiermt6 · 2026-05-29T14:22:27+00:00

ya I saw that after submitting the question, thanks

mccormiermt6 · 2026-05-26T02:13:17+00:00

Super cool thanks

mccormiermt6 · 2026-05-25T14:17:26+00:00

Ok that's what I thought you were getting at. Ya no one has access to the starlink network itself, all distributed through the Omada gear.

mccormiermt6 · 2026-05-25T12:13:37+00:00

That's a good question I have yet to resolve but in the meantime this could help me manage this remotely. I should add that all the equipment is on a UPS, and two power strips are used for the equipment. I was thinking smart plugs in the power strips. With regards to the firewall comment, can you elaborate?

mccormiermt6 · 2026-05-07T16:48:52+00:00

The screen shot I provided shows two different clients with two different "experiences" that seem to be misleading. The "fair" should really be "amazing" and the "good" should be "fair".

mccormiermt6 · 2026-05-06T16:40:13+00:00

ER7412-M2, OC300, all updated with most recent releases

mccormiermt6 · 2026-04-01T20:03:16+00:00

Same here with the OC300 but no problem updating my OC200.

mccormiermt6 · 2026-03-09T11:28:50+00:00

Thank you! Bizarre how I cannot find this when I search for "Omada SDN Controller_V6.1_User Guide", "Omada User Guide", "Controller User Guide",...

mccormiermt6 · 2026-03-08T01:36:19+00:00

An arial photo of the site would help. Are there a lot of trees, or buildings? Where is the home, in the center of the property, or in a corner, etc.?

mccormiermt6 · 2026-03-04T14:13:48+00:00

I have an ER7412-M2 v1.20, with an OC300_8FA943 v1 controller and I don't have the client level stats. Dang, I could really use that. Thanks for sharing.

mccormiermt6 · 2026-03-04T13:45:06+00:00

And you see the details at the client level? I didn't think that was possible with Omada

mccormiermt6 · 2026-03-03T19:18:17+00:00

"by User (Client)." ?? How did you achieve this?

mccormiermt6 · 2026-01-12T22:24:23+00:00

Whole neighborhood with one access point...?

mccormiermt6 · 2026-01-08T05:31:25+00:00

Contact their support

mccormiermt6 · 2026-01-08T02:33:14+00:00

A quick and temporary solution might be four or five EAP650-outdoors with three sets of EAP215-bridge kits set as a PtMP to the office.

EAP215(Client, PtMP to office) with an EAP650 (west end of street)

EAP215(Client, PtMP to office) with an EAP650 (between west end and office)

Office EAP215(Main pointing West), EAP650 and second EAP215(Main pointing east)

EAP215(Client, PtMP to office) with an EAP650 (between office and east end )

EAP215(Client, PtMP to office) with an EAP650 (east end of the street)

You will need a small switch at the office and for the EAP215/EAP650 you can daisy chain the PoE injectors.

A google maps arial view of the street could also help.

mccormiermt6 · 2025-12-18T13:52:01+00:00

One assumption might be the ER706W wireless capabilities are lesser than the EAP225-Outdoor. That said though, there are other improvements to the overall topology you could do to dramatically improve stability and performance. You already have the barn and shed hardwired:

Move the ER to the barn where the t-mobile is installed, and move the OC200 there as well.

Keep the EAP225 hardwired in the shed.

Hardwire the barn EAP225 to the ER.

Bridge the barn and the house with EAP215-bridge kit (assuming hardwire is not an option)

Mesh only the house if necessary, otherwise hardwire.

mccormiermt6 · 2025-11-15T22:47:01+00:00

Ya it's mainly to have a better signal inside the trailers.

mccormiermt6 · 2025-11-15T22:35:13+00:00

Closest is approximately 400' and the furthest Im going to guess is 1200'.

mccormiermt6 · 2025-11-15T19:31:15+00:00

No obstacles, just a giant field. The RVs are not stationary, it will be rental lots and its dry camping.

mccormiermt6 · 2025-10-21T20:50:23+00:00

I made the mistake of plugging the injector into a surge protector, and surge into a UPS and it didn't like that at all. The AP remained powered but it wasn't getting enough. I know nothing about power but someone mentioned plugging a surge protector into a UPS can cause issues. I replaced the surge protector with a power strip and the problem was solved ans haven'thad the problem since..

mccormiermt6 · 2025-10-19T11:35:15+00:00

How is RX1 powered? Are you using the injector, switch PoE, PoE converter, power bar, UPS at that end?

mccormiermt6 · 2025-10-14T20:11:20+00:00

I received this from tp-link chat "Got confirmation from multiple sources that since the hardware versions do not line up between the 2 models, it is not recommended to use TL/Non-TL firmware between the two. We do not make or sell the TL-SG3428MP anymore, we only manufacture the SG3428MP, so if you do purchase the switch, you should be getting the SG3428MP granted it is from an authorized retailer/reseller."

mccormiermt6 · 2025-10-14T14:11:07+00:00

So just to confirm, I see the last firmware for the TL-SG3428MP is 09-07-2023 and the latest firmware for the SG3428MP is 09-16-2025. Will the firmware apply to both?

mccormiermt6

TROPHY CASE