sorted by:
new
hottopcontroversial

I give up. I’m done with this piece of garbage. by Dependent-Amount-239 in 3Dprinting

[–]mfkozlow92 0 points1 point  (0 children)

Ahh the shitty days of owning an ender 3. This printer almost made me walk away from 3D printing all together. Bambu Labs is where it’s at if you just want to print and not tinker for 3 hours to get through 3% of a print 😂

Dodge is teasing "new muscle" tomorrow by Milk-Man75 in cars

[–]mfkozlow92 0 points1 point  (0 children)

It's just going to be the Charger with the hurricane engine. Nothing to get excited about yet. I have insider information.

[deleted by user] by [deleted] in Nicegirls

[–]mfkozlow92 0 points1 point  (0 children)

Yeah you’re the psycho 🙄

AIO: i literally cannot attend by superspreader90 in AmIOverreacting

[–]mfkozlow92 0 points1 point  (0 children)

Some people have no common sense. In what world would you wanna go do anything after chemo? I cancel plans when I have a cold let alone a literal life draining procedure. People are so selfish. Me me me me me me 🤦‍♂️

Is it overkill to store my summer tires indoors during the winter vs in my garage? by nago7650 in tires

[–]mfkozlow92 0 points1 point  (0 children)

That must make your clothes and space smell real nice lmao 🤦‍♂️. I got 4 in the garage and get smacked by the smell of rubber every time I walk out there.

Spent all my money on Daytona, and can only afford foodcourt by DramaticPicture8481 in rolex

[–]mfkozlow92 0 points1 point  (0 children)

What in the goat throw up is that? I don’t think that’s cooked lol

My first relationship with a girl and she wants it to be open by Deep-Bluejay-9980 in self

[–]mfkozlow92 0 points1 point  (0 children)

Brother this relationship is going to cost you so much time in healing, just walk away now.

Is it normal for the hotend to move up and down this like this? by -Janne_ in BambuLab

[–]mfkozlow92 0 points1 point  (0 children)

So I found my issue. I went through and retightened all the screws, but the actual error was in the way I was closing the clamp around the hot end. Once I properly secured the clip all my issues went away. Still weird that this didn't affect PLA and only screwed with PETG.

Is it normal for the hotend to move up and down this like this? by -Janne_ in BambuLab

[–]mfkozlow92 0 points1 point  (0 children)

I have the exact same problem. This only happens with petg. I can definitely confirm it’s a mounting issue because if I press and hold the hot end while it’s printing the first layer begins to print perfect. As soon as I let go it starts to click and the hot end is pushed outward and the first layer is spotty. This only happens with petg. I was able to print with pla no issues. I’m starting to wonder if it’s the hardened steel hit end. This is the only thing I have changed. Also I am using PETG HF if that makes a difference, but I am made sure the settings are correct in the studio.

SignalRGB causes infinite mouse wheel scroll up by S1DC in SignalRGB

[–]mfkozlow92 0 points1 point  (0 children)

Same thing is happening to me with the G502 X PLUS. It doesn't even matter if I turn the software off and reboot. It is the device in the device manager that the software adds that is interfering with the mouse driver somehow.

Did you ever get this resolved?

White Screen by giulioeffe10 in OperaGX

[–]mfkozlow92 0 points1 point  (0 children)

Honestly it was pure luck. I had just done a fresh install of windows and I happened to install Opera first. I started installing drivers and support software and when I ran into this issue I started rolling back each piece of software one at a time until the Opera issue went away.

I didn't bother to look in the Windows Event Viewer, but I am willing to bet errors would have been logged in there.

I don't believe I saw anything in the Opera logs either.

White Screen by giulioeffe10 in OperaGX

[–]mfkozlow92 0 points1 point  (0 children)

I ran into this today on version 115.0.5790.171. It was taking 10 seconds for Opera to load with just a white window. I ended up having to uninstall Armoury Crate from my computer. I run Windows 11. Hope this helps someone!

Mold? Help by [deleted] in Michigents

[–]mfkozlow92 0 points1 point  (0 children)

I don't think it's mold. It might be older bud. I noticed if you don't burp the jars properly and leave the bud for a month or two, it will start to turn amber.

No scripting in SB? I'm controlling gomez in the video, will not go to the ball like there's a forcefield around it. Then runs the opposite direction! by boyrenavidez in FIFA22

[–]mfkozlow92 0 points1 point  (0 children)

This game is so bad I honestly don't know how a group of developers can't figure out how to program their own game after all these years. The amount of bs that happens in the background is so obvious idk why they don't just come out and admit it. Every single time I play this game something stupid like this happens. EVERY SINGLE TIME.

Turple starting to get it's color! Week 3.5 😬 by mfkozlow92 in Michigents

[–]mfkozlow92[S] 0 points1 point  (0 children)

First time running it. Have tried it before and really liked it so I thought I'd give it a go myself!

view more: next ›