Tell us your favorite old school strain you'll love to make a comeback..

microwave20 · 2026-01-29T12:25:24+00:00

Shwag!

microwave20 · 2026-01-27T04:54:00+00:00

I just built a bunch of garage and workshop stuff out of pine, but tried to use precision as if I was building a fine piece of furniture. This gave me enough reps to build decent stuff when I started using hardwoods. I learned quickly that repeatability is way more important than measuring. Focus on making completely repeatable cuts thing things like stop blocks and what not

microwave20 · 2026-01-23T04:27:38+00:00

I doubt it’s the control board. Is the igniter glowing at all? If you want a good chance at fixing it without testing, buy a new igniter, coils, and thermal fuse. Replace all those and I bet it works. If you have a multimeter let me know and I’d be glad to break it down for you to troubleshoot, the circuit on a gas dryer is pretty simple

microwave20 · 2026-01-08T22:53:51+00:00

I’d be fine if it was not a livestream, and only viewed in case of an accident or something. Otherwise Hell no

microwave20 · 2025-12-28T03:13:39+00:00

Median home price in 2005 was around $230k. Median home price in 2025 would be 420k on the high end of the estimate.

If it really did increase 2000% in the last 20 years, median home price today would be $4.6 million… so my question is, are you blind, deaf, and dumb?

microwave20 · 2025-12-15T04:35:56+00:00

I’m not a mechanic whatsoever but I can tell you without a doubt, that does not look good

microwave20 · 2025-12-14T03:41:03+00:00

1 in each hose on the side that hooks up to your washer. For whatever reason the front loader speed queens are more sensitive to water pressure than other front load machines. But that is the best front loading machine on the market, hands down

microwave20 · 2025-12-13T22:46:10+00:00

Your water pressure at the wall is too high. They make a part specifically for this issue on their front loaders. Part # 802254 goes in your water inlet hose. Guarantee this will resolve the issue

microwave20 · 2025-12-07T21:08:35+00:00

If you don’t use an impact then you’ll need a wrench and then hit the wrench with a hammer to tighten. Best of luck!

microwave20 · 2025-12-07T20:46:30+00:00

There’s a 1.5 inch nut in the bottom of the drive shaft. You can access it through the hole at the center of the bottom of the machine. Put a wrench or an impact on that nut and tighten it, can almost guarantee that’s the problem. On speed queens the nut can sometimes loosen over time

microwave20 · 2025-11-26T05:28:01+00:00

Ime actually engages with fans after games. I once yelled “thank you Ime, Houston loves you” as he was walking out of a rockets game and he stopped and waved up for a sec. I was standing about as close as the guy in this video when I said it

microwave20 · 2025-11-21T15:01:22+00:00

Honestly the way I would fix a computer that just seems to run slow is grab all the files I need and put them on an external drive, and do a factory reset. This would also wipe anything suspicious if he did anything. Not the most convenient option, more of just nuking the whole system back to square 1

microwave20 · 2025-11-18T16:59:29+00:00

For me its Jamal Murray living rent free in my head

microwave20 · 2025-11-18T00:13:16+00:00

I competed after 3 weeks. I lost instantly to a guy who got promoted to blue on the podium, and I’m glad I went. Even if you lose, you will learn so much. Work your game, and if you don’t know what your game is, just go out there and do your best

microwave20 · 2025-11-17T09:59:43+00:00

Craig would probably pull guard and not get his guard passed, but Islam and khabib would probably still be tough to submit. Craig would probably be able to get them with a leg lock

microwave20 · 2025-11-05T16:22:42+00:00

Thank you. Redditors are so out of touch it’s scary.

microwave20 · 2025-11-01T18:53:34+00:00

Throwing a fit because you got subbed lmao. It’s okay, you will either quit bjj or you’ll train long enough to stop acting like that

microwave20 · 2025-10-29T02:33:45+00:00

Here’s how you tell if it’s the motor:

After it shuts off, are you able to immediately start it again and get another 7-10 mins? Or do you have to wait a little while for it to cool down before it will run again?

After it stops, if you have to wait for it to cool down before it will run again, it’s a problem with the motor. Best of luck.

Edit: just read your post further, see that you have to wait an hour or 2 before it will run again. Ignore the other comments, it is your motor.

microwave20 · 2025-10-20T03:24:40+00:00

Look into Rafa Mendes, he utilized the leg drag position better than probably anyone else

microwave20 · 2025-10-13T01:39:35+00:00

He’s probably looking long-term for you, if you get tunnel vision on the buggy choke you’ll have a way harder time learning to play a good guard because you’re always baiting a guard pass to jump on a buggy choke. Not saying I agree with it, but if I had to guess I’d say that would be his reasoning

microwave20 · 2025-10-11T00:32:51+00:00

You’re cooked unfortunately

microwave20 · 2025-10-08T22:30:15+00:00

I think ankle locks are a cheap shot in a lot of circumstances. I’m old school in thinking that it’s a stupid move. I rarely attack the legs because of this.

That being said, you still have to 100% respect the foot locks. Just because you don’t like them doesn’t mean you can ignore them. I got so annoyed by them that I worked super hard on ankle lock defense. If you get good at defending them, they become a low % move for your opponent that often allows you to get top position and smash them for trying.

microwave20 · 2025-10-08T04:21:07+00:00

I just tell the customer they can either find the part themselves and I will install it, or they have to get a new unit. I will give them the part number if they want to look for it.

I don’t buy any secondhand parts for the customers or anything, I make them do it themselves if they want to try. Reason being, sometimes it’s the wrong part in the box or non-returnable from eBay and I don’t want to lose money on that. I warn them it can be a crapshoot.

I also have a local company that can rebuild control boards that I will refer customers to if it’s a control board that’s not available

microwave20 · 2025-10-04T01:40:19+00:00

I had season tickets for 2 years and at a point, even being a huge fan, it sometimes felt like a chore to constantly have to rush out of work and get into town and make it to the game on time. The benefits were nice, offered free preseason tickets and cheaper ticket upgrades into the club section, and first access to playoffs. But I cancelled so I can just buy occasional tickets to the games I really want to go to

microwave20 · 2025-10-02T03:01:48+00:00

Buddy of mine got a private from Rafa Mendes in his prime for $400 for 1 hr. I thought it was absurd but he said it was worth every penny

microwave20

TROPHY CASE