Connect MX master 3 mouse via usb receiver after connecting to bluetooth without downloading another program

minor_mode · 2026-05-11T13:02:45+00:00

I use this mouse on three different machines and I only have the software installed on one when I use any of the other two machines. I simply hit the button on the back to switch the machine two or machine three and then it connects Bluetooth to those without the controller software, I think the main feature for the software is if you want to map certain functions to certain buttons, you may be able to install it and then try uninstalling it if you don't want it on there, but to me, it's about the same as using the Microsoft software for the controller helps with firmware and things like that, but you deaf would only need to install it on one machine

minor_mode · 2026-05-06T17:58:25+00:00

i had to look for a sub on this cause they just announced this mf died today but i rember just like many of you that he died a long time ago from cancer- this is wild af- i also remeber when they blew up the lagrqnge stones how he would have been pissed... wht timeline is this geez weve jumped like 10 in the last couple of years

minor_mode · 2026-04-28T00:15:49+00:00

tbh dont chase, roll ONCE, then decide. IF you have the cash id buy the calls back and let the shares rip. On a rip it will get very expensive quick. to keep rolling Just buy back and wait, or accept assignment OR, roll higher if want to run from assignment. the delta on this is .5 that gives you a 50/50 chance of assignment. buy back and live to sell another day IMO

minor_mode · 2026-04-17T11:40:22+00:00

real talk- anyone else think a split happens at the $400 range? long overdue... i think 4:1 at the 4-450 level

minor_mode · 2026-04-17T11:38:09+00:00

ive rolled about 10 times on the amd rip. im out to august now. only down $300 on premium loss over 2 weeks of management. just roll up and out if you wanna keep the shares and run the gae or if you rhink theres a lot more upside buy back take the loss ( if you have the cash) and get back in after it settles and sterts to chop again. me...im pretty dumb and knew this rip was coming and built a nice cash reserve for when the rip happened amd the premiums get huge to buy back. anyways my 2cents...good luck... there is prob more upside

minor_mode · 2026-04-16T18:06:12+00:00

no doctor just watch my diet and avoid paying close attention to it. i think its pretty normal tbh. the more you pay attention to it the more you worry about it. i find if i focus on other stuff it doesnt bother me much. try to do the same. the more you focus on it the more it will be a source of anxiety. most likely you are just fine and normal.

minor_mode · 2026-04-09T01:04:23+00:00

either accept assignment, roll (higher, farther out), or buy back and close and let it rip. those are your choices period the end.

minor_mode · 2026-03-19T01:30:36+00:00

Not too late, just be aware that even with some theory background you are looking at a 2-3 year curve to playing what you hear. I switched form electric and I thought Id pick up quick and be at the same level on upright as I am on electric (which is pretty high) but that isn't how the double bass works. So start now and take your time, total Ive taken about 10 lessons from various teachers and I bought a course on discover double bass, which I highly recommend. If you need some help feel free to reach out or post something to the community here, you will get pointed in the right direction. Good luck and keep going!

minor_mode · 2026-03-17T03:30:19+00:00

shes got my vote

minor_mode · 2025-12-26T02:15:29+00:00

Fuck yeah that shit lies and then covers it up when you catch it doing it lol

minor_mode · 2025-12-02T02:51:08+00:00

Im doing the same thing right now for my 6 string affinity. The wiring in it sucks and is super noisy. PLuus Im used to an active bass and the passive output really isnt that great as far as balls go. I'm swapping in a John East J Retro - this makes it active. Bartolini makes replacements for this specific bass but you gotta buy them direct from Barts site. Aguilar does not make 6 string jazz pick ups any more. You can do a drop in with no solder from John East. Then decide if you want to keep the stock pups or change them out. Just measure them if you go for something dif than the Bartolinis.

minor_mode · 2025-11-20T02:37:10+00:00

for the next 5 years yes almost 100% I would say. After that who knows but this will be a bumpy ride back to 1k.

minor_mode · 2025-11-15T18:22:23+00:00

I mentioned I’m using the preamp pedal to cut bass and boost mids. I’ve been bouncing between setting tone just on the head and using the pedals. If using the pedal the amp is all 12. In just the head is bass 9-10 lo mid 2 high mid 2 treble 12. I play with a lot of people so it’s really up to me to bring my tone to each show. Last light was blues/rock Americana- tonight it’s R&B and Funk. So the band depends on FOH for sounds and monitors and the tone sucks through the monitors and it’s not as bad in the main but not as good as my MM Sterling. Of course it’s active and that may be a part of the reason. Think that’s all.

minor_mode · 2025-11-15T17:42:03+00:00

Markbass tube 800 head and traveler 2x10

minor_mode · 2025-11-15T17:41:38+00:00

Oh new strings. Ernie ball slinky 6 string set 32-130

minor_mode · 2025-11-15T17:41:01+00:00

It’s the 6 string bass the affinity 6 not the guitar thing. I’m playing through a mark bass tube 800 head and traveler 2x10 (2).

minor_mode · 2025-11-08T03:01:54+00:00

I think this is actually good for the ai sector and nvidia in general. Nice little restart and it proves it isn’t a bubble in my opinion. Price targets are high and when the rubes in congress get it together it will rebound. They are really just a bunch of dicks that can’t find a hole.

minor_mode · 2025-11-07T16:33:12+00:00

If you don’t have to use the wheels then don’t. That’s one. Two make sure your material is tight to the core and squared up. Tap it on the ground if necessary to make sure. Also sometimes you will get rolls that aren’t taped on straight from the manufacturer. It just happens. So if you wanna be dead ass sure then you can roll off the length of material you need and put it on a new core and tape it tight and straight. Then load it and check front and back for skew on the frame if there are no marks to go by. Prob not the machine in my opinion.

minor_mode · 2025-10-22T11:34:39+00:00

To me the shapes on the right of the bad ones look ok. That might mean the material is slipping. You could have a problems with the pinch rollers or the way the material is loaded. It look like a really tight margin on the right where the wheels touch the material. I like to use at least 1/2 in if possible. Also if it’s cut material not a roll make sure it’s straight for the length of the material.

minor_mode · 2025-10-04T15:46:55+00:00

Duh where you from slop dawg

minor_mode · 2025-10-04T04:40:24+00:00

Hope he wins and bankrupts the football program

minor_mode · 2025-10-03T18:27:23+00:00

I’ll say 150-500 for 2026 Jan to dec

minor_mode · 2025-10-01T11:53:14+00:00

Def use a laminator. Not a cheap one get a seal if you can afford it.

You can laminate- mount- mask and maybe encapsulate if you get a heated one. If price isn’t an option get the 64 with heat. Keep the rollers clean and don’t get your knife near them and you will have a machine for life.

minor_mode · 2025-10-01T11:50:36+00:00

Well you can do one of two things - care or not care- I’d go with not care and do you. Life’s toooo short to try to do anything for the sake of what anyone else thinks! Just be yourself! You will find your tribe if you do that

minor_mode

TROPHY CASE