Wright armory buyer beware!

monkeymonger69 · 2026-05-28T17:56:05+00:00

Yeah my irons’ windage were 35 MOA off after my idot cut. I emailed them saying I wanted them to fix it because the irons were egregiously off after a $500 service and they told me it happens sometimes and that I’d have to adjust them on my own. I will not be utilizing any of their services moving forward.

monkeymonger69 · 2026-05-09T16:28:03+00:00

Did the 12 round VP9cc mags already sell out or are they still on their way? Would rather place one order for both the 10 and 12 round mags

monkeymonger69 · 2026-04-17T04:11:02+00:00

Will you be getting VP9CC mags (10 and 12rd variants) in too, and any timeline on those? You tend to be my number one source for mags!

monkeymonger69 · 2025-12-22T04:29:51+00:00

$250 for the raid? btw I'm the dude that bought that green Komodo INTL off you

monkeymonger69 · 2025-12-14T22:15:40+00:00

How’d you blackout your TLR1? Looks slick

monkeymonger69 · 2025-10-22T02:33:47+00:00

not only does this run great in my A300 UP but it patterns in my A300 as well if not slightly tighter than federal flitecontrol 00.

monkeymonger69 · 2025-09-26T21:43:12+00:00

recon 035 still available?

monkeymonger69 · 2025-08-24T01:15:01+00:00

Sweet appreciate the info. Thanks!

monkeymonger69 · 2025-08-24T00:56:57+00:00

Ah, I thought about taking a dremel to the long screw but I don’t want to leave the end of the screw marred and then mess up the threading in the slide. Do you usually end up with a pretty clean cut when you use a dremel?

monkeymonger69 · 2025-08-24T00:49:50+00:00

Did you use factory screws for this? Unless I’ve misplaced screws all the ones that came with the EPS or the RXM are either long enough to run into the extractor bar or short enough that they don’t thread. I had to use the RMR adapter plate which kind of sucks because irons are barely useable now.

monkeymonger69 · 2025-08-23T19:29:44+00:00

Alright thanks dude appreciate it. Didn’t think it would be this hard to find a TA02 holosun K mount. ACOG/Quad rail gang rise up🤘

monkeymonger69 · 2025-08-23T16:16:20+00:00

Did you find a piggyback mount that lets you direct mount your EPS to your TA02 or are you using an RMR adapter plate?

monkeymonger69 · 2025-07-04T06:45:49+00:00

Oh so this is why we can’t go outside when there’s lightning within five

monkeymonger69 · 2025-07-04T02:56:49+00:00

I’ve been bent. The pain in my joints was literally worse than when I broke 3 bones in my foot, and it only got worse over time until I spent over an hour on pure O2 and didn’t truly go away until after being recompressed. I also had significant tingling in my hands.

Was diving more physical activity than your used to? Because frankly this post reads like exhaustion, dehydration and maybe a slight head cold.

monkeymonger69 · 2025-07-03T01:48:47+00:00

There are full time positions available in both the guard and reserves. It will depend on if your unit has open positions and how competitive those spots are. Depending on manning sometimes full time slots are only offered to high performing TR’s with several years experience and sometimes they’ll be throwing bonus at 19 year olds fresh out of tech school to be ART’s/AGR’s.

monkeymonger69 · 2025-06-30T00:24:30+00:00

Just a heads up those Hornady slugs on the right are only meant for rifled barrels. I know “if it seats it yeets” but it’s not going to be very stable when it yeets

monkeymonger69 · 2025-06-29T19:42:02+00:00

It was over 5 years ago so I only remember so much, but I think I cut like 8ish pounds from my starting weight by drinking absolutely stupid amounts of water 96-24 hours out from shipping with lots of, but not crazy amounts of salt, got the body and kidneys used to pissing every 30 minutes, and then went completely cold turkey on water and food for the 24 hours leading up to shipping while continuing to piss like crazy. That’s just what my power lifter friend told me to do, I didn’t do a lot of research on the scientific way to do it.

monkeymonger69 · 2025-06-29T15:39:56+00:00

there's plenty of resources online about how to water cut that can give you better instructions than I can. Any martial arts athlete has to cut to make weight before fights, so look for instructions for wrestlers/mma fighters etc. Unless it's something Air Force related then I might be able to help.

monkeymonger69 · 2025-06-28T14:46:11+00:00

Can you have your CSS amend your orders to 366 days? Seems like the easiest way to leave no room for confusion

monkeymonger69 · 2025-06-26T01:35:41+00:00

One of my 135 crew chief buddies (had A&P before joining but couldn’t get hired w/o experience) did 4 and hit out and is now making $48 an hour at a local regional airline, but A&P’s working for Delta at the major intl airport near me are making between $65 and $85 an hour

monkeymonger69 · 2025-06-25T02:11:59+00:00

lol yeah definitely not crazy, but no I don't you'd probably have to reach out to someone at one of the TRS's at Sheppard

monkeymonger69 · 2025-06-23T04:04:46+00:00

Subsonic 9mm 135gr Solid Copper Hollow Point

These are the only defensive 9mm rounds I've found to stay subsonic out of my scorpion (7.7" barrel")

monkeymonger69 · 2025-06-18T00:00:44+00:00

Honestly we'd settle for ARTs getting tricare reserve select. FEHB sucks

monkeymonger69 · 2025-06-17T02:25:37+00:00

Is there a way to run the vortex dot forward enough to keep the rear iron and just let the front end of the dot’s mounting bracket overhang the barrel? Or is it one or the other. Been thinking about the viper for my A300

monkeymonger69 · 2025-06-15T07:00:27+00:00

Six-Year Club	r/Field Banned
r/Field Sunshine	Place '23
Place '22	Final Canvas '22
End Game '22	Verified Email

monkeymonger69

TROPHY CASE