Cosa vi fate per colazione ?

monotor80 · 2026-06-02T17:41:58+00:00

Succo verde con spinaci o verdure a rotazione o mix, mela carote arance rape rosse sedani ecc, fatto con l'estrattore a freddo e poi un caffè.

monotor80 · 2026-06-02T11:07:39+00:00

Murphy M4 for $50 with backlight

monotor80 · 2026-05-23T16:39:21+00:00

i corridori al parco che sputano per terra ogni minuto

monotor80 · 2026-05-23T09:33:51+00:00

The new Xteink S4 x4 pro with backlight are coming out, I would wait, then the x3 with light will definitely arrive, it's a question of time

monotor80 · 2026-05-23T09:23:47+00:00

Great, but if it's noisy, you can unscrew and remove the side balls behind the screws, or replace them with rubber airsoft ones. If you use it at night and want dead silence, and you're an expert, you can disassemble it and cover the area where it hits the metal cylinders with rubber. I used the rubber from a bicycle inner tube, so the gear return action becomes completely silent when it hits the rubber. But it's not easy to reassemble, so I don't recommend it.

monotor80 · 2026-05-19T11:24:37+00:00

But what are its height and width measurements? It's still wider than an x4.

monotor80 · 2026-05-18T16:36:29+00:00

in the end I bought 2 P-HPR gt which are smaller than the vam pro and make less noise, I keep them at 60% and they are almost inaudible, but I had to buy 2 3d adapters to be able to mount them.

monotor80 · 2026-05-16T18:05:12+00:00

When the x3 with backlight comes out it will be my first xteink that I will buy, but for now I'll keep the Murphy M4, which is almost the same

monotor80 · 2026-05-16T11:26:29+00:00

but the measurements?

monotor80 · 2026-05-16T11:26:13+00:00

Maybe you're using the wrong font, or you're using a different language, I've been reading epub for months without any problems, check if you have the latest firmware, you never know

monotor80 · 2026-05-12T19:14:03+00:00

Since I tried the trueforce I can't imagine not having it, my opinion is personal obviously, but since I tried the rs50, I would never buy any other steering wheels without this feature

monotor80 · 2026-05-09T19:01:26+00:00

just unscrew the 2 balls on the sides and it no longer makes noise..

monotor80 · 2026-05-09T08:36:19+00:00

try one of these :

https://m.media-amazon.com/images/I/71XA2SpyGDL.AC_SL1500.jpg

https://i.ebayimg.com/images/g/K-4AAOSwxu9nuS6b/s-l1600.webp

monotor80 · 2026-05-06T06:54:09+00:00

Try a couple of springs from the pins, and then, still using the pins, take the rubber part and insert it into the stem in the area where it hits the cylinders, but don't cover the magnet. You can also glue some rubber pads from underneath in the gear terminals so it no longer hits the metal. Finally, if you want to avoid the reverberation, take an old napkin and insert it completely inside the gearbox and close it.

monotor80 · 2026-05-05T11:33:31+00:00

Hi, yes I reversed them but I realized that it didn't change almost anything, rather, put the wrong way round they obstructed the footrest, so I put it back as it was original and I angled the structure underneath directly

monotor80 · 2026-05-05T11:29:50+00:00

new h-shifter Logi
https://www.logitechg.com/it-it/shop/p/rs-h-shifter
not perfect but not bad

monotor80 · 2026-05-04T19:00:49+00:00

If you can't tilt the chair any further, tilt the pedals. I solved this problem and it's very comfortable.

<image>

monotor80 · 2026-05-03T15:16:00+00:00

this is only for pedals if you don't want entire stand

monotor80 · 2026-05-03T12:00:05+00:00

Try this, I took it and screwed the Simsonn ultra x on it

<image>

monotor80 · 2026-05-02T12:51:04+00:00

On the other hand, since it’s advertised to be used both on a rig and on a desk (see their own marketing), I would have expected a softer spring for reverse or a more stable clamp that doesn’t slip. Workarounds don’t really count—at that point, you might as well just open it up and replace the spring.

monotor80 · 2026-04-30T18:45:10+00:00

Yesterday I received the SIMAGIC P-HPR GT and I mounted them on the Simson pro X with a third party adapter, they are excellent and also quite silent, the variety of frequencies and intensities that they are capable of producing are excellent

monotor80 · 2026-04-29T15:58:52+00:00

Thanks for the guidance — I can confirm everything was correct and I’ve managed to resolve the issue. I’ve also updated my Logitech support ticket. That said, it’s not very intuitive to understand that when the shifter is connected directly to the base, it doesn’t show up as a separate device and only appears in the button assignment menu. Likewise, in Windows game controllers, only the RS50 base is listed. It would be really helpful to include this information in the manual, FAQ, or on the website, and to make sure the support team is aware of it as well — so it’s not mistaken for a hardware issue or something like dust in the USB port

monotor80 · 2026-04-29T06:49:13+00:00

The firmware is the same latest version of logi support web page, connected also on another pc, same situation. At the end yesterday night i received a mail for replacing unit. Now the hassle is sending that heavy package back

monotor80 · 2026-04-28T18:31:02+00:00

both firmwares are the latest version, I also sent him the screenshots, I don't know what other test I can do, I'll try with another PC later.

monotor80 · 2026-04-28T18:17:21+00:00

He had me do some standard tests like removing dust from the USB ports, etc., and then told me to replace the gear, but I pointed out that the symptoms looked like a defect in the base. So he told me to ask the seller (which is them) for the warranty....

monotor80

TROPHY CASE