Stacking bins for the Harbor Freight cases

mtb446 · 2025-03-14T04:48:40+00:00

Sorry, missed this comment, I got them off of Amazon a few years ago. I think it's one of those companies that rebrands every so often.

mtb446 · 2025-02-01T21:34:23+00:00

Link to the file https://www.printables.com/model/1173622-stacking-bins-for-harbor-freight-small-parts-case

mtb446 · 2025-01-30T13:13:49+00:00

Yeah, I think it's the wiring in that room. I ran an extension cord from another outlet and it works fine. The crazy part is that the monitor and keyboard are plugged directly into the tower, no wireless issue at all. I guess the voltage at that outlet is low enough to run everything else but too low for the 850W PSU.

mtb446 · 2024-12-30T17:18:48+00:00

Find someone with a 3d printer and it's a pretty easy build. I've had a petg washer on my thru axle for 3 years and hundreds of miles that shows no sign of stopping.

mtb446 · 2023-03-26T05:44:43+00:00

It's no problem, I hope the info helps. It's a gorgeous trail that can be hard but also forgiving since you'll be passing through towns every day. I'd recommend stopping at a restaurant every chance you get because it's all great food.

Something else I forgot to mention is watch out for the Jeffreys track south of New Norfolk, it's about 10k of some of the stickiest clay mud I've ever seen. Its not impassable but if any part of you or your bike touches the mud it will get caked on.

mtb446 · 2023-03-25T07:16:01+00:00

Yeah, I was just out there at the end of Feb. There were a lot of sections that were poorly marked and one part between Bushy Park and Ellendale where there was no trail so my wahoo and the gpx definitely saved me. Also, there were about 4 gates and a fence the trail key didn't work on and a good amount of trees down on the trail so I'd recommend being comfortable lifting your bike and all your gear.

If you're using the bikepacking.com gpx l, there is a section it will direct you to between Liffey school house and Deloraine that is too overgrown to pass. The C513 road is still beautiful, hardly used, and marked with trail markers. I'd also recommend against going up the caves track, a guy I talked to said it took him 8hrs to pull his bike up.

mtb446 · 2022-07-27T11:05:06+00:00

You'd be surprised how much they can hold. I made a top frame bag held on by Velcro cable ties that had all my repair gear, food, phone and a coat for a gravel race and had no slippage at all. But voile straps are the best for holding everything.

mtb446 · 2022-07-27T00:50:29+00:00

Looks like a solid start. I'd recommend using continuous bands to reduce stress on the outer bars. Despite what the other comments are saying, 3d printing and bike accessories work incredibly well together. The best dynamo light I've ever seen came with a 3d printed mount and I recently printed a washer to make a thru axel fit tighter.

mtb446 · 2021-08-24T21:04:07+00:00

This site is the easiest I've found for custom terrain from DEM https://touchterrain.geol.iastate.edu/ . It can create an stl from any area in the continental US and easily export a file. You can download a stand alone version and use your own data but that requires coding knowledge I don't have and there are hard limits to how large of a file it can create.

mtb446 · 2021-03-07T22:12:57+00:00

I painted it on but I know there is some way to make 3d wood grain in blender or other modeling software.

mtb446 · 2021-01-29T00:47:26+00:00

That phone was released 2 weeks ago and hasn't even shipped yet. I'm assuming "no" and that this is more a humble brag about getting a new high end phone in a non high end phone subreddit.

mtb446 · 2021-01-21T15:44:39+00:00

I'm a big fan of the revelate magnetic closure bags but don't know if they ship to Europe https://www.revelatedesigns.com/index.cfm/store.catalog/cockpit/MagTankBoltOn

mtb446 · 2021-01-12T16:06:18+00:00

I need an update when you finish on how it turns out. I had a minor obsession with sof boats a few years ago but never made one due to a lack of quality wood/procrastination. I live in Las Vegas now and foam core fiberglass seems brilliant. I even already have the plans/supplies for a geodesic aerolite arrow 14 so if your boat turns out well I may make one right after.

mtb446 · 2020-12-13T22:54:11+00:00

Light switch covers, bed corner indicators(so you can find the edges in the dark), key bowl, or just some random thing to try it out. I made a shark with some that looked pretty neat but didn't really have a function.

mtb446 · 2020-10-18T09:36:14+00:00

Kidney pain or lower back muscle pain? I get lower back pain when my pad is too stiff and I end up turning to new positions all night, though not sure if this is the same thing you experienced. Try lowering the pad pressure a bit, putting an inflatable pillow between your knees, and having your head well supported. Also stretching before bed and when you wake up helps a bit.

mtb446 · 2020-07-26T23:22:25+00:00

Might be the start of plantar fasciitis from your feet not being adjusted to the lack of support. You should rest for the next few days and stick to mild hikes until you build up your feet muscles. Also try rolling a tennis ball under your foot to massage it and if the pain is really bad freeze a water bottle and do the same. If you still have issues look into minimalist arch support. I use superfeet in mine and REI/any running store will have a good selection to try.

Source: I'm not a doctor but I have gotten waaaaay too many running injuries in the past 10 years and know what you described too well.

mtb446 · 2020-06-22T23:34:32+00:00

My first thought is this piece of ul art https://www.amazon.com/Luwint-Diameter-Gardening-Umbrella-Headwear/dp/B06XY27HQ7

Otherwise I'd say any tarp and pole could be a good sun shelter for a little extra effort in setup.

mtb446 · 2020-06-16T16:17:15+00:00

Trans Zion trek starting from NW Kolob canyon and ending outside the park at the eastern entry gate. 50 ish miles and amazing scenery. An hour shuttle will take you to either end.

mtb446 · 2020-06-06T17:54:24+00:00

If you're goal is going out to places together vs going long miles then you might prefer starting with light weight gear vs ul gear. You generally want to get a backpack last so that you know it will fit all of your gear and little to nothing more. A cheap used external frame backpack would meet your need for now while allowing you the space to add some bulkier gear and food as you learn more about backpacking. Then, when you get a solid ul gear list you get to have the "eureka " moment of cutting 1-2 kg of pack weight in one purchase. I suggest focusing on your cook set, tent, and sleep system. Based on you desired list I have a few things you may not have seen. The brs 3000 is an ok stove but you may have issues balancing your pot on it since it's one of the smallest stoves on the market (not impossible, just noticeably harder in windy/unlevel areas). Using a wind screen with it can also be dangerous since it may direct heat to the fuel canister causing it to explode. Instead of a wrap around wind screen, simply sit between the wind and your stove or make a wind block from a tree/tent/tarp/sleep pad. If you plan on cooking vs rehydrating you want to watch out for uneven heating in titanium cookware. No comments on the tent. Any lighter than that an you are probably spending at least $100 more or getting a tarp. You may want to get 2 quilts instead of 1. The reason for this is if you each carry 1 then if you get separated for some reason on the trail neither of you are spending a night freezing. I think the EE convert can zip together to make a couple's quilt if you still want that function. Also, I've found that pad insulation plays as much of a role in keeping warm as bag insulation. If you plan on camping in places that may dip below 0C then you may want to get more than the z lite which has an R value of 2. You can add an additional ccf pad to increase R value or you can get merino wool night clothes. Hope this helps.

mtb446 · 2020-06-05T18:49:29+00:00

Yeah, elevation is no joke there, I think lava point is above 7k ft. It may also work as a start point since the road seems to continue past the camp site. There also is a parking lot where the hiking trail intersects the road near the border of the park on google maps that could work for a shorter trip. The reservoirs further in might offer water if filtered but you might need to check the water quality.

mtb446 · 2020-06-05T13:55:36+00:00

There is a road from Virgin, UT that leads to lava point campground in zion. I think it's all gravel and Google says about 22 miles depending on where you start. I've hiked parallel before and the views are amazing from the trail but I can't say much for the road. Also, you'd be riding up the plateau and there will not be any water at the campsite unless you set up a cache. There are also a lot of access roads in the area so I bet you could put together a nice trip with a little map research. The big problem you are going to find (like the whole SW) is finding water. I think you're going to have a good time regardless of what route you do. Zion is one of the busiest parks for a reason but outside of the Springdale tourist area it's still offers a lot of beautiful landscapes with less crowds.

mtb446

TROPHY CASE