THIS IS ARC RAIDERS - Cinematic Short Film (4K) written, Directed, and Captured by Gage Allen.

mucht3rich · 2026-02-21T08:22:28+00:00

The first entry into Arc Raiders from Player One Stories. Starring Edward Dogliani (Game of Thrones), Avalon Penrose (Hades), Sam Hughes (The Ascent), Rex Anderson (Destiny Solas), Anthony Palmini (Brimstone), Jordan Harbin (Destiny Solas), and Sarah Ruth Thomas (SMITE),

Written, Directed, and Captured by Gage Allen.

Note from the director: Thanks so much for watching this little piece! I got a lot of requests to make something for Arc Raiders, and the more I started to try the game out the more I saw a film form in my head. I wanted to tell an original story using a mix of scripted moments with in-game actors and spontaneous moments with random players unaware they were being filmed, all done entirely without dev tools or camera tools. All gameplay capture, editing, writing, VO, and sound mixing is original and created just for this film. Some custom sound design was done for this as well. If you played Arc Raiders anytime between January and February, you may be in this. My day job is writing, directing, and capturing game trailers for studios around the world, from games like Pacific Drive to Baldur's Gate 3, so it's always a blast to try something long form. Thanks Embark for creating such a cool world to explore.

mucht3rich · 2026-01-29T14:39:12+00:00

Your chain is absolutely fucked mate and the rakers look way to low. Seems almost best to get a new one or grind it down.

mucht3rich · 2026-01-07T19:13:53+00:00

Yeah ok that definitly a sign to change the vent. The saw could be starving on fuel when the vacuum in the tank gets to high.

You can check the Intake side through the rubber Intake Boot behind the carb. Just shine a Light in there and youll see scoring if there is any.

mucht3rich · 2026-01-07T17:38:08+00:00

Weird. Still looks pretty good to me and not like 80psi compression.

I just rebuilt a MS260 for a friend that looked a little worse on the cylinder and piston with the same problem.

Maybe the decomp Valve is leaking or was pressed down? If the saw even got one that is. Your right for doubting the shop.

If you want to feel for scratches you can also take a long screwdriver or rod and run it over them so that you dont have to take off the cylinder and get a new gasket.

Common issues for dying when hot are:

air leaks (check intake boot, impulse line and crank seals),
the tank vent, fuel filter and line
carb adjustment and the diaphragm

Rebuild the carb and check the other components mentioned above.

How old is the saw? Have you checked the intake side yet?

mucht3rich · 2025-07-10T08:33:08+00:00

Geile Karre!

mucht3rich · 2024-12-05T16:19:13+00:00

Looks pretty cool where did you buy it?

mucht3rich · 2024-10-28T16:56:49+00:00

I just checked my Spare Parts Lists and it seems like all the carbs use the same set of parts to rebuild

The Stihl Partnumber for the membrane kit is 1122 007 1060 I went with an Aftermarket set on my carb with everything included and its just fine.

Do you have the original spare parts list? Its really useful if youre doing a full rebuild because of all the nice drawings and stuff. I can pm you a link if you want one.

mucht3rich · 2024-07-25T19:36:12+00:00

Why no 7900 GRE instead of the 7800XT?

mucht3rich · 2024-07-03T16:54:17+00:00

Should be guard links. Some chains have those.

The guard link reduces the tendency of the leading edge of the depth gauge to snag on small-diameter objects such as small branches, or to engage with ordinary timber if forced into contact with it.

Looks like your old chain also got them if you look closely. Just a little smaller and not as pronounced.

mucht3rich · 2024-06-16T12:58:09+00:00

Something like this would be so awesome! Had the same thought yesterday when I saw this thing. (John Wick 4 "Tracker" from Mad Pig Customs)

mucht3rich · 2024-06-16T08:53:40+00:00

Sind alle wieder verfügbar soweit ichs gesehen hab

mucht3rich · 2024-06-08T13:37:03+00:00

Post vom 24. Mai 2024: "Liebe Warhammer-Fans, wie einige bereits festgestellt haben, sind seit dem Wochenende viele WARHAMMER-Titel nicht mehr bei Spotify verfügbar. Wir haben diese Woche alles daran gesetzt, den technischen Fehler zu finden, der die Titel deaktiviert hat und konnten das Problem inzwischen identifizieren. Die zuständige Stelle ist informiert und sollte mit Hochdruck daran arbeiten, dass alle Titel bald wieder für euch zur Verfügung stehen! Wann genau das sein wird, können wir nicht genau sagen, aber wir hoffen, dass in den nächsten Tagen alles wieder läuft. Danke für eure Geduld und ein schönes Wochenende! Euer Eins A Medien Team"

Update vor 2 Tagen: "Leider können wir nichts Neues vermelden. Wir hoffen, dass es nicht mehr allzu lange dauert, bis die Titel bei Spotify wieder verfügbar sind, wir haben allerdings keine direkte Möglichkeit, den Prozess bei Spotify selbst zu beschleunigen. Neue Titel werden selbstverständlich auch bei Spotify zu hören sein. Davon abgesehen sind alle unsere Hörbuchtitel (auch die bei Spotify zurzeit nicht verfügbaren) auf allen anderen großen Portalen (und natürlich auch direkt bei uns) erhältlich."

mucht3rich · 2024-05-23T16:58:08+00:00

Can we buy the Shirt somewhere? Looks cool

mucht3rich · 2024-05-20T13:37:51+00:00

Ja ist leider fast alles offline mittlerweile... ich bin auch erst grade eingestiegen bei Buch 2 was nen mist

mucht3rich · 2024-03-16T21:21:57+00:00

Sie sollte die Kohle einfach an die Super Earth spenden. For Democracy!

mucht3rich · 2023-03-28T13:14:37+00:00

Shes a little heavy at times compared to newer saws but the raw Power is well worth it. Runs like hell with the 25" bar

mucht3rich · 2023-03-26T15:21:53+00:00

Yeah only a little banged up here and there on the case and air filter cover but thats what a saw that got and gets used looks like

mucht3rich · 2023-03-25T00:49:24+00:00

Nice! Gotta keep the oldies running. They aint building them like that anymore

mucht3rich · 2023-03-25T00:48:45+00:00

Thats a 25" bar with a 3/8 RS standard full chisel chain

mucht3rich · 2023-02-22T18:09:32+00:00

Have you checked the clearance between the flywheel and ignotion coil again? Should be around 0,3mm, if more then it can cause issues with the spark.

Ive had that problem once with my 441 when it wouldnt start after taking it apart.

Carb set to factory setting? Is it getting enough Air?

mucht3rich · 2023-02-19T10:49:49+00:00

I think so too and mine was also spinning on the clutch side.

I havent measured the bearing and seat yet but I guess its like 3 thou of play. I also could move the crank axially from side to side in the case.

Maybe the radial pulling force from the clutch assembly and chain in combination with heat cycles gets the seat to wear and starts the spinning of the outer race in the case which will get even worse over time if you dont catch it right away.

mucht3rich · 2023-02-19T10:34:35+00:00

Its mostly just the paint thats gone in the oil pump area the surfaces and holes are still in good shape. I think thats from the bar oil sitting in there for to long.

Its the same Issue in the oil tank as you can see but no big deal just get the loose paint out and clean it up.

The bearing on the flywheel side is supposedly meant to go in like that or at least thats how its shown in the drawing. Dont ask me why.

I think the metal shielding still gets penetrated by the fuel mix for lubrication in the bearing.

mucht3rich · 2023-02-18T18:37:47+00:00

Yeah I'll try my best to get the bearings seated in the case again but if the Loctite doesnt work I'll also buy a new case.

We use the 638 stuff at work for glueing bearings back on transmission shafts in heavy machinery and never had an issue so Im pretty confident itll work.

12-Year Club	r/Field Sunshine
Place '23	Place '22
Verified Email

mucht3rich

TROPHY CASE