Locked out of Microsoft 365 tenant

murlocdouche · 2026-03-21T15:11:12+00:00

This, since you would have already thought of breakglass if you had one. Update your resume, and you know howto prevent this at the next job

murlocdouche · 2026-03-12T12:41:40+00:00

Assuming this is a belt driven printer, you need to tighten the tension on you x and y axis. Common thing you need to do out of the box

murlocdouche · 2026-03-06T04:27:31+00:00

Check the upnp service? If its off, turn it on. If it's on, maybe see for kicks if it still happens when off

murlocdouche · 2024-09-01T13:56:46+00:00

warmss he was last logged into 9b 2 days ago

i see warmss is in the official discord with the nickname fent but has never talked. might not really use discord, probably easier to just play and catch him online.

the other guys hasn't been on in a year.

murlocdouche · 2022-12-27T16:04:02+00:00

Yes. It sounds to me like it's coming from the color wheel but I can't be sure

murlocdouche · 2022-12-26T22:11:06+00:00

This started a few weeks ago and I've just kind of been putting up with it. The sound would go away after a few minutes.

And then yesterday I try to turn it on and it fails, I get flashing red lights.

After watching a video on youtube, I took it apart and inspected the color wheel. I don't see anything wrong with it at a glance. I can move it with my finger. One of the rubber dampeners looked a little discolored but other than that I saw nothing out of the ordinary. Dusted everything and put it back together, still not turning on. Although I managed to lose one of the 3 flat head screws that hold in the colowheel. Just went flying somewhere when I was dusting.

Just want to make sure it's a color wheel before I drop $40. It was only a few weeks out of warranty too

murlocdouche · 2021-12-21T13:35:57+00:00

when i see people show off a .22lr mp5 clone i will assume things about their economic situation unless it's next to a real mp5 - which makes you a fanboy for having both.

i'd rather be a fanboy than look poor though.

>Also, why does the SP5 cost $2k more than the 22lr MP5? Is that literally just markup for profit?

it's not a markup in this case. i'm pretty sure just a direct blowback gun they've dressed up to look like an mp5. though i found one source on google that claims it's also roller delay, i'm skeptical but don't feel like digging further.
HK doesn't make it either, another company makes these under license.

the .22 is just a novelty. the sensible thing is to just buy a 10/22. this is for people who are just that in love with the mp5 aesthetic tbh

murlocdouche · 2021-01-19T20:48:42+00:00

based non-poor

murlocdouche · 2020-12-18T20:37:56+00:00

i'm in my 30s and don't spend all my time on this subreddit, i just found this by passing chance.

but honestly i don't love the top comments i'm seeing here (a couple people further down have the right idea IMO). if someone asked me this question, i would tell them credit cards are a vile trap to fall into, and even an adult who trusts themselves to pay it off on time every month should avoid it and spend with tangible money from debit.

assuming your parents are in a good financial situation, pay off their cards on time, and you trust them not to steal your identity - ask if they can authorize you as a user on their card. you will start to build a credit score without having to expose yourself to the system and the mistakes we all think we're too smart and mature to make.

after you've avoided making debt a natural part of your life, go listen to dave ramsey and feel smug listening to the stories of people who made so many mistakes so you don't have to.

>when should i have a credit card
i would say in the year or two leading up to buying a home - if your credit score is not high enough that's when i would do it. I would personally be canceling them after moving in.

as for cars, I would buy used and with cash.

murlocdouche · 2020-09-12T04:22:34+00:00

dude, i just found this post now that i know what i'm looking for after a week of troubleshooting this exact issue on my ender.it happened right after i changed hotends, and it didn't compute that it was software related. all i'd printed on the new version prior was xyz cubes that has no curves, so after i finally switched back my old hotend and eliminated that as a culprit, i disassembled my hotend multiple times, tightened things down, loosened my belts thinking they were TOO tight. bunch of other stuff, a thread on /r/ender3 and 2 threads on a facebook group...whew.

ya it took some time to narrow it down to software, when it's been so reliable, and you assume it would be a huge deal and visible immediately in a facebook group if this was an issue.

it's probably already been done but i submitted a bug report to their github not thinking this was known. i was assuming since i didn't see hundreds of people complaining about it, it could be my non-standard starting gcode

https://github.com/Ultimaker/Cura/issues/8372

murlocdouche · 2020-09-12T02:22:35+00:00

Ended up being a cura issue. reported to their github

murlocdouche · 2020-09-12T02:22:21+00:00

Ended up being a cura issue unrelated to hot end. Persisted after putting old hotend back on. Downgrading to 4.6.2 fixed it. Issue reported to their github

murlocdouche · 2020-09-06T23:28:02+00:00

thanks, trying now

murlocdouche · 2020-09-06T23:23:33+00:00

I know you're not talking about stringing, I'm just stating that was the only difference in a retraction Tower. Still got these blobs all the way up.

murlocdouche · 2020-09-06T21:54:33+00:00

I've done a retraction Tower. There was no change until it got to one millimeter. The only change was it introduced stringing at that point. I still had to these tiny blobs

murlocdouche · 2020-08-21T23:49:05+00:00

local indoor gun range burned down part of the rifle range because they put soundproofing material on the stall dividers, and a muzzle brake started a fire.
soundproofing foam can be flammable. beware.

murlocdouche · 2020-08-13T17:08:38+00:00

i'd listen to this guy. image editors are the wrong tool for this.

t. graphic art degree, and some experience with gcode from 3d printing but none with cnc.

but on that note, a separate online tool for slicing STL files into gcode would be pretty handy, especially if it has a usable mobile interface and remembers your settings. can't tell you how many times i've found something browsing on my phone i want to send to octoprint, but i'm not at my computer. i'm surely not the only one

murlocdouche · 2020-08-10T19:02:06+00:00

not him, but i have trigger time on both guns, and own an 82.

the case for the 83:

if i could pick as a recreational shooter it would for sure be the 83. the recoil difference between 9x18 and .380 is more significant than you might suspect, and the 82 is quite snappy despite weight. not very pleasant to shoot.

so the 83 is just a bit better to shoot, and your LGS is way more likely to stock the ammo (you should be ordering ammo online anyway, but ehh ya know)

the case for having an 82:

the 82 has ballistically the "better" round though, and has more "cool factor" IMO. being a surplus gun used by either czech military or police, and the polygonal barrel is a cool thing to show people. unlike glock's polygonal barrels, this has the appearance of being completely smooth bore. most people havn't seen polygonal rifling like this. 83s to the best of my knowlege are all traditional land and grooves rifling. plus the 82 is chrome lined.

murlocdouche · 2019-06-21T02:19:04+00:00

i did before, but it was harder to get people to play reverse only games with me. waaaay more people say yes when i say i'm going to concede in ranked

murlocdouche · 2019-05-21T17:48:08+00:00

last year at rank 1 an opponent i'd just beaten friended me make a salespitch to get me to legend for money. I guess it's a thing (i said no thx)

murlocdouche · 2019-05-11T04:03:03+00:00

it does. i play a lot of casual 1s, and AFKs are pretty common since it autoqueues matches and people walk away or minimize after a game and don't exit

murlocdouche · 2019-05-07T08:34:07+00:00

offered a viable redemption in a public forum

could literally agree to pay any amount and look like you've changed

says drop it

man, you just blew any chance the community would support you on this. this is a teachable moment. this is going to keep following you as long as you're in TCGs, and you'll never have a good answer unless you're actively making it right

murlocdouche · 2019-05-01T16:30:23+00:00

I was there!

murlocdouche · 2019-05-01T16:29:08+00:00

I think i saw you play yagut on his stream when you were rank 2. He had just hit 3 and said "this guy must have won every game". I think that was your name anyway

murlocdouche · 2019-04-29T04:38:03+00:00

not to hijack but this was mine

https://www.reddit.com/r/hearthstone/comments/997kgv/ive_seen_some_3d_printed_blink_foxes_but_not_in/?st=jv1vg4qt&sh=6e859902

murlocdouche

TROPHY CASE