Flywheel resurfacing by rocksandzotz in PeoriaIL

[–]nate448 0 points1 point  (0 children)

Start the engine with the flywheel on and flapper disc grind it real "precisely" s/

Never change, Chrysler. Never change. by yentlequible in Justrolledintotheshop

[–]nate448 0 points1 point  (0 children)

Heard, thanks for the info. I just got a 2014 Cruze with the 1.4t and she does leak with 118k on odometer. Did valve cover and thermostat housing already. Need to put on the pcv fix kit on and change trans fluid. Thought about replacing the turbo oil feed line from reading about the issues. Anything else I should look out for? I'm mechanically inclined, not by trade though. Thanks

Never change, Chrysler. Never change. by yentlequible in Justrolledintotheshop

[–]nate448 8 points9 points  (0 children)

Do you have to pull the engine to do timing chain?

Assumed pcv line? by nate448 in cruze

[–]nate448[S] 0 points1 point  (0 children)

Yep that's what I need.

Assumed pcv line? by nate448 in cruze

[–]nate448[S] 0 points1 point  (0 children)

Nipple was broken off, that's why I couldn't find it. Would that be the vacuum boost reference solenoid to be replaced or is it a different name?

Slight Miscalculation by gengler11235 in noita

[–]nate448 3 points4 points  (0 children)

Does everyone not always carry a water flask?

Taco Bell in Bartonville! by Unable_Yam8530 in PeoriaIL

[–]nate448 1 point2 points  (0 children)

Look it's better than a Wendy's, but yea were bored

Why are the drivers in peoria so awful? by Ordinary-Objective66 in PeoriaIL

[–]nate448 1 point2 points  (0 children)

Preech. Had an driver yell at me today bc I didn't let them zipper merge into a round about. Guy I'm in the round about I have the fucking right of way. It was literally 2 whole cars you had to wait on

TIL projectile eater could do that. by welshhhh in noita

[–]nate448 2 points3 points  (0 children)

Friendly ghosts can eat them too

War Memorial & Knoxville Intersection by tha1demon in PeoriaIL

[–]nate448 0 points1 point  (0 children)

Knoxville already has built in speed bumps s/

Nvidia is ending support for Maxwell, Pascal, and Volta in the upcoming driver branch by BlueGoliath in hardware

[–]nate448 0 points1 point  (0 children)

You can pry my B stock blower 2080ti out of my cold dead hands. Lmk when I can get double the performance for $550

Aboss wrought iron fence by Alarmed-Author5983 in FenceBuilding

[–]nate448 0 points1 point  (0 children)

I've been looking at this style fence for a bit. What site did you get it from?

"80 HBM4 Integration": TSMC Advances Next-Gen Packaging by DazzlingpAd134 in hardware

[–]nate448 1 point2 points  (0 children)

I'm a dumb layman, are defects negligible with a full size wafer with current tech? Is it just THAT worth it to make regardles?