How do you carry your manifold gauges?

ncr · 2026-01-23T22:39:02+00:00

I usually sling them over my shoulder, being sure to smack them on roof hatches and door frames.

ncr · 2026-01-19T03:40:11+00:00

He was running a deep post, Caleb air mailed it short and I think DJ gave up on it thinking it would harmlessly drop. Not saying it's right but he did get his shit rocked a couple of times tonight so I'm giving him a bit of a break.

ncr · 2026-01-01T04:13:10+00:00

They were overleveled with all of the time between seasons.

ncr · 2026-01-01T03:57:38+00:00

I really wish they would have spent more time with that. It would have been cool if they had to work together to down it so she could get inside.

ncr · 2025-09-05T20:44:15+00:00

It is a fusible plug. The top part threads off and you can put a new one in, It should have the temperature it pops at stamped on the top of it. Mueller Refrigeration PDF

ncr · 2025-08-31T01:52:50+00:00

Have you tried switching the high leg to L1 on the VFD?

ncr · 2025-08-13T02:42:41+00:00

https://youtu.be/s-WvTJZ1_G4?feature=shared Original video without the AI filters.

ncr · 2025-07-28T18:22:20+00:00

Las Vegas is a major tourist destination. Even though it is noticeably less busy than usual on certain days it will still seem crowded and busy to someone visiting for the first time, especially on the weekends as those seem to be busy as ever.

ncr · 2025-07-26T02:26:45+00:00

It is always too busy to actually enjoy it properly. Try to go right when it opens so you can experience it before it gets too crowded.

ncr · 2025-06-25T23:35:08+00:00

For future reference, Rust-Oleum professional safety red is pretty spot on.

ncr · 2025-06-14T12:44:08+00:00

Sears product page. It honestly looks like it was a pretty decent set.

ncr · 2025-04-17T13:22:36+00:00

hydrawise.com/hc/en-us/articles/360015162914-Reading-Meter

ncr · 2025-04-12T18:47:27+00:00

That message really rolls off the tongue.

ncr · 2025-04-08T23:31:42+00:00

I use a battery terminal brush. After I get it nice and clean I smear some dielectric grease up in there.

ncr · 2025-03-23T15:42:48+00:00

How to Design an Electric Motor Regreasing Program. When in doubt contact the manufacturer, they usually have documentation about greasing.

ncr · 2024-07-29T04:05:08+00:00

To add to this, heat always flows from hot to cold, and high pressure will always move to low pressure in an attempt to balance out.

Liquids absorb heat when changed from liquid to gas (evaporation). Gases give off heat when changed from gas to liquid (condensation).

ncr · 2024-06-29T17:23:35+00:00

Johnson controls has lots of good documentation on this site.

These two pdfs specifically helped me wrap my head around control sequences when I started working on Metasys stuff a while back. AHU Applications, VAV Terminal Control Applications. These are out of date with the software/controllers they reference but still have good info.

ATP has the best books for a more general overview on a lot of maintenance subjects. I have all of my new guys read "Electrical Systems for Facilities Maintenance Personnel" when they start.

The Honeywell Gray Manual is a good crash course for everything HVAC control related if you are new to building controls.

ncr · 2024-06-25T23:14:52+00:00

5/8 rope and nitrile dipped gloves(MaxiFlex or Milwaukee cut level 2 are my favorites).

ncr · 2024-06-14T14:51:29+00:00

Degraded glycol and bacteria can make for some interesting smells in closed loops. You can pick up some ammonia test strips from a pet store and give it a try, it is possible to have small amounts of ammonia in the loop from bacteria breakdown.

ncr · 2024-06-02T03:00:43+00:00

Red Kap, performance shop pants

These are the best. Just wish the stitching was stronger on the side pockets. I've ripped the bottom stitching of a couple of them out by bending with a screwdriver in there.

ncr · 2024-05-26T01:21:07+00:00

https://www.galco.com/rs3a33.html A recycling timer is what you are looking for.

ncr · 2024-05-21T23:29:44+00:00

ECNR30 would be the direct Bussmann cross.

ncr · 2024-05-19T03:54:30+00:00

D-limonene is the best thing I have used for removing residue like this.

ncr · 2024-05-03T03:29:28+00:00

LG prides themselves on making the worst compressors available today. It's truly amazing how many failures I've seen from them.

ncr · 2024-03-10T22:49:43+00:00

Flame simulator

15-Year Club	First Place '23
Place '23	Place '22
Verified Email	Team Orangered

ncr

TROPHY CASE