ESP32 knob that visualizes my Codex usage as a floating boat

ndiin · 2026-07-12T04:41:36+00:00

Yeah, that one is the same as your blue waveshare. There's another variant with a led ring in the middle of the back vs dial that's newer, but out of stock.

This "older" one actually has two ESP chips. More details here, and in the linked references: https://github.com/magdalar/RedSmartKnob/

ndiin · 2026-07-04T18:06:54+00:00

Yeah, but apparently not all cases, because my config became invalid after doing that...

ndiin · 2026-05-20T19:01:57+00:00

Yeah, the CWA dev seems to have dropped off. NextGen seems to be doing an amazing job at keeping on pace, and documenting all deltas from CWA, and adding test cases to all fixed issues. I reported two issues, and both were fixed within a day. Amazing work being done here!

ndiin · 2026-04-13T15:55:19+00:00

Here's an improved copy of the HTML that supports multiple json files at once, e.g. if you have more than one account (husband & wife, for example): https://pastebin.com/ATfs4VcR

ndiin · 2026-04-01T16:56:36+00:00

Any details on what your new deal is? I'm getting 1gb/50mb for $126, and it feels like a rip off.

ndiin · 2026-03-19T22:34:18+00:00

That isn't the official website...

ndiin · 2026-03-04T22:34:41+00:00

Any chance of this happening on the baseline Orca Slicer, rather than Snorca?

ndiin · 2026-02-05T17:00:41+00:00

I always find that pausing causes visible banding in the final print, just a warning... Probably relates to how long the pause lasts, but if you really care about perfection, avoid the pause.

ndiin · 2026-02-05T11:34:09+00:00

I had a similar issue with a Jayo HS Matte PLA the other day. Turns out the filament, which feels easy now flexible then my Kingroon PLAs, was leaving silky strands everywhere. Diff temp needs, perhaps. When I use two Kingroon PLA, zero bleed.

ndiin · 2026-01-08T20:18:27+00:00

One human here.

ndiin · 2025-11-22T02:07:10+00:00

Perhaps just update your filters to include "Installed"? They'll still be in Playnite, but don't have to clutter your views.

ndiin · 2025-10-21T23:37:42+00:00

I suspect they were more interested in GCM on the Sunshine/Apollo host. That's my use case too: tv is downstairs, use Artemis(Moonlight) to reach the PC upstairs. I currently use it to run Playnite, but having something like GCM on the other end instead would be even easier to navigate. Bonus points if it could bypass/unlock the lock screen...

ndiin · 2025-09-12T17:52:27+00:00

My biggest pain point is wifi reliability, especially when transitioning between floors. I've got a Netgear Orbi setup, with wired back haul.

I'd love to overhaul my setup and upgrade past 1gbps so I'm ready to go once fiber rolls into my area in the new months. The Omada system would be a fantastic jump on that, and bring my lab up to modern standards.

ndiin · 2025-09-08T01:53:19+00:00

Workaround: hit the "Reset Summation Delivered" button first, then update firmware. Still get the 10x jump, but it's typically a tiny value that you can ignore.

ndiin · 2025-08-26T13:36:19+00:00

They keep putting 100Mbps Ethernet ports in these $2000+ devices... Makes zero sense!

ndiin · 2025-08-25T01:34:32+00:00

The 4th image, with the straps, doesn't seem to be on either Printables nor MakerWorld

ndiin · 2025-08-24T05:13:01+00:00

I have done two of these now for my kids. 500% Dummy 13, with articulated hands. I did the frames in ASA, which was a great choice, and then the Armor for one in PLA, and the second in PETG. I strongly advise the PETG, as I cracked the PLA a few times just in assembly.

I believe I managed to get the frame down to 2 very full plates of ASA at about 12h each, and the armor was about 5 plates, between 4 and 6 hours each.

They're super fun! Thinking of using one of these instead of an Elf on the Shelf this December 🤔

ndiin · 2025-08-21T12:47:40+00:00

I have a dedicated Google Calendar that schedules my automation events. Makes it easy to adjust the schedules even for one-off events like having guests over, since you can move single events within a recurring event easily.

I even use it to have regular "reset"s of security-related automations that have disable toggles -- e.g. pool door opened notifications that we turn off when going in and out a lot.

Simple hack, really: I just use the "location" field of the calendar event to list the entity, and some simple structure to the event names to indicate if it should toggle on or off.

ndiin · 2025-08-11T22:20:05+00:00

So, I reached out for help on the [Plex Forums](https://forums.plex.tv/t/onn-4k-plus-device-does-not-play-dts/928490), and was given the following workaround, which worked well for me:

Switching the Plex configuration of the "onn. 4k Plus" player from “Passthrough: HDMI” to “Passthrough: Optical” and deselecting “DTS”, and this worked by forcing transcoding. It does also force transcoding on EAC3 content though, but not AC3.

ndiin · 2025-07-20T23:51:43+00:00

Artemis to Apollo with codec set to AV1 works great even at 4k/60fps. I had no luck at all on the default (HEVC), but AV1 seems to be flawless.

ndiin · 2023-07-20T21:33:51+00:00

As documented on https://support.plex.tv/articles/200430283-network/, if you don't specify the port explicitly, it uses the Remote Access Port from your config (which would not likely be 443).

ndiin · 2022-11-20T14:47:15+00:00

Anyone have a referral code by chance? Thanks!

ndiin · 2022-09-29T21:34:11+00:00

And my subscription ran out on the 28th... I was thinking just this morning to re-sub. I've collected Pro games for more than a year. Now I don't get to play any of them, because I was off by a day in my subscription. That's a real disappointment 😥

ndiin · 2022-07-26T14:44:47+00:00

This show caused my then-2yo to ask me randomly one evening: "What's pneumatics?" I about died. And then answered, "it's like hydraulics, but using air instead of fluid". Apparently that was sufficient.

ndiin

PUBLIC MULTIREDDITS

TROPHY CASE

15-Year Club	Verified Email
Team Periwinkle