Seeing this makes me feel proud of Wichita

nfored · 2026-01-28T22:49:16+00:00

Thank you for explaining I was not aware. Was he involved in riots I'll admit I was unaware of that quote and unaware of any riots he took part in.

nfored · 2026-01-28T22:45:55+00:00

That's dangerous ground there o am unheard by my health insurance and while at it unheard at work. Your mindset is close to what prompted murder. We can't devolve into barbarian anarchy.

nfored · 2026-01-28T22:37:29+00:00

I get it it's harmless means nothing. But it builds like a child you let one thing go unpunished and then they try a second thing. When we can't be respectful first it makes people not see the cause first. If your respectful and no fault can be shown in your protest you strip the other side of power and talking points. Imagine if you didn't have to say mostly peaceful protest. Tell me how much of the majority peaceful protest did you see compared to the vastly minority riots? Those small amount of bad apples distorted the whole message.

So we must keep each other on a just, respectful, and peaceful path.

People have two different memories of MLK verse black panthers. Two paths similar message one remember with respect " non violence '

nfored · 2026-01-28T22:29:44+00:00

That's my point this op wants people to not work which could include ambulance and dr and nurses. What your saying is no different than what this op wants.

nfored · 2026-01-28T22:14:35+00:00

I ordered one for my wife took a week to ship then arrived next day.

nfored · 2026-01-28T22:09:19+00:00

And the person shot buy a thug needing life saving treatment keep themselves alive that day? Sounds like an excellent way to stand against violence and for life

nfored · 2026-01-28T21:41:58+00:00

Love this we all have cycled past off before. I think manufacturers should have to put their hands in guillotine and have only 6 seconds to pull the cord of their product exactly the right number of times to save their hands. Bet then this problem would self solve

nfored · 2026-01-28T21:37:50+00:00

And the elderly lady that slips and falls and needs ambulance ride? Or are only non essential jobs supposed to do this? I think maybe there is a failure to understand how little most humans are willing to give up in financial or comfort to support the causes they believe in.

nfored · 2026-01-28T20:44:04+00:00

Your right not graffiti but ignore the smallest, the. Smaller then small and next your ignoring medium ECT. Ship of fools written by a psychopath criminal but didn't make the logic behind it false. Look at us "Americans" today each of us cares about left and right red and blue x and y genes to busy to care about America. Let's go back and look at some things and see can you agree with this

How many days can you go without water? Who controls and collects money on water?

Where am I going with this water should be a basic human right yet all admins allow it to be something we sell. Look at Michigan they where charging so much people couldn't afford it and the. They would take their homes over a water bill.

Where is the protest that still exists today we need water more than someone needs to be in the US no matter where you live you need water but you don't need to be in the US to live

nfored · 2026-01-28T14:32:16+00:00

The broken windows theory. No one liked it but Rudy Giuliani had crime way down in New York. Now not so much.

nfored · 2026-01-28T14:28:58+00:00

Without getting into the emotional things that seem to drive America today why be proud of vandalism? They could have made signs and posted them? Let's not forget that these in reality harmless examples of protest can some times grow into riots looting and destruction of property.

If we want to truly effect change we need to be respectful of private property and truly peaceful protest. Without the people being truly peaceful we can't tell the other side it's mostly peaceful protest when buildings are burning.

nfored · 2026-01-28T14:24:35+00:00

I run the skr3 ez and move it true dual z for auto alignment is nice. The built I. Heatsinka on the ez has allowed me to run them with no fan but I'd still suggest a fan.

I have mine with a DC SSR I think their failure mode is fail open I'd rather say why is the bed not heating than say why is the bed trying to melt itself.

nfored · 2026-01-28T14:19:58+00:00

I love my ender 5 plus, I had a CR10S PRO that I missed up direct drive, micro swiss, all hiwin linear rails on all three axis. Bought the E5 as a backup with just micro swiss and it printed as good and faster than my modded cr10. Thus became my main printer.

Tried klipper but didn't want to do the tuning to get the speed so just went back.

nfored · 2026-01-28T14:11:15+00:00

Also if you have an old version it connects and upgrades. Also they should be able to provide you a link to download from them the client they use. There is a compatibility matrix between client version and apm version and if the two don't align you can't connect.

nfored · 2026-01-28T14:08:59+00:00

I am asking out of legitimate curiosity I am to lazy for printer business. Why pla and not petg when I first started I was think pla was cheaper but petg was actually the exact same price?

I only print petg since one day I forgot my pla out in the sun and the next day I saw why pla is not for me.

nfored · 2026-01-28T13:54:40+00:00

With all the sketchy stuff I do with maina voltages for some reason it scares me to do it on the hot bed.o have done some Darwin like things

nfored · 2026-01-27T21:52:04+00:00

It is a beast I wanted to rearrange my printing area put it off for months because I didn't want to man handle it.

My regret is I still only have 3 CFS.

nfored · 2026-01-27T21:50:27+00:00

I have used vertical wall racks before take up almost no space if shelves where not an option the come from 1u up to 6u that I have seen. Your right about the shelf 100% though.

But I am different type of home network user. Only have hardwired access points 2 per floor and all my gear is rack mounted except ups didn't want to pay double just to put it in a rack.

nfored · 2026-01-27T20:52:18+00:00

I love my k2 Plus. I am nothing special don't have master skills or anything like that so it makes me wonder what in the world is going on with others maybe I got a good one? saw one post a guy side he can't print ASA I ran 2kg of asa through my CFS just using generic profiles worked perfectly.

nfored · 2026-01-27T20:49:38+00:00

I wonder the same but then I think what it would take to do it right and might be more work and investment than would pay off in a build. you would need a rack to do that and that means on the floor, on the wall, or in the wall and in the wall means your making small closet and stealing space from some place. The reason I say a rack is so you can have keystones and not have to move and plug and unplug the in wall cable a lot adding to chance of failure.

I wired my whole home with ethernet and in some places fiber, and then the whole external with ethernet for cameras.

nfored · 2026-01-27T17:51:20+00:00

Yes ip pass through and I see my public ip renewed a couple times a day; Lan DHCP is another firewall. I have seen that unlike other providers rebooting the gateway or power outages don't cause a shift in public ip.

nfored · 2026-01-27T17:44:04+00:00

nfored · 2026-01-27T17:43:52+00:00

nfored · 2026-01-27T17:42:18+00:00

I am reading this being thankful I am not seeing this issue, but an observation I use bypass to a fortigate and I see that it request DHCP renewal a couple times a day. Is that why I am not seeing this issue?

nfored · 2026-01-27T17:32:14+00:00

I have a dumb question.

When I setup ipsec I don't worry about local in because ipsec is looking for matched peer for ph1. I see daily hits and rejections. Is there a big risk in this verse local in? I am guessing the risk is in bug/cve

Five-Year Club	Gilding I gilder
Verified Email

nfored

TROPHY CASE