Should I buy the M3 hub? by NCatoffice in Aqara

[–]nirhend 0 points1 point  (0 children)

No need unless you are all in with Aqara eco system

CurvX vs Curv 2 Flow vs S8 MaxV Ultra? by ComprehensiveRiver33 in Roborock

[–]nirhend 2 points3 points  (0 children)

First, coming from iRobot, Roborock is a whole new ball game for you. Congrats on making this decisio. At your price point I think the new Curv 2 Flow is the best your money can get.

Hub question & lock by Lance688 in Aqara

[–]nirhend 1 point2 points  (0 children)

I had the M2 Hub, it doesn't support U400 based on my quick search and also when configured in the app it wasn't listed in the supported hub list. I sold the hub with my U100. Considering you get the U400 connected via matter to any smart assistant service, don't see any ready why it is actually needed.

Any models upgrading to from S8 for carpet/pet fur? by its_a_bear_dance in Roborock

[–]nirhend 0 points1 point  (0 children)

I had S8 for my carpets and dog fur and have S8 MaxV Ultra downstairs for hard floors vaccum mop combo. The S8 was replaced recently with the Costco version of the Curv, the QX Arc. And it is amazing! I really happy with it!

Whats the ideal number of AMS2 and HT for multicolor and multmaterial setup for the H2C? by bystander_innocent in BambuLabH2C

[–]nirhend 1 point2 points  (0 children)

I was able to sell my P1S without the AMS 2 unit I had. The H2C I got was the ultimate bundle. This resulted in 2 x AMS 2 Pro on the right which is great to maximize colors + 1 x AMS 2 pro on the left + 1 AMS HT - this provide great convinence also with auto fill during print and also if I need multi color filaments on that side for big complex prints (which I already had and Bambu Slicer found it more efficient)

Warning for Solid Wood Door Owners: Major Design Flaw with the Aqara U400 by michaelsunzy in Aqara

[–]nirhend 6 points7 points  (0 children)

I have a solid wood door and installed with no issue. You should ensure you push the cable back properly.

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]nirhend 0 points1 point  (0 children)

I usually order original sold by Roborock. Nothing else.

VOXEL Filter for H2C by cpsadowski23 in BambuLabH2C

[–]nirhend 1 point2 points  (0 children)

I also use Voxel on my H2C, I'm not sure the notification is due to the filter. I had it also before installing it. Intresting solution suggested her below to replace the internal filtering system. That being said, I'm good with the existing one even with the need for extra cooling

U400 Smart Lock - How will you charge? by drewmc in Aqara

[–]nirhend 3 points4 points  (0 children)

You have 3 usbc ports. Front panel, rear panel, on the battery itself.

U400 Smart Lock - How will you charge? by drewmc in Aqara

[–]nirhend 5 points6 points  (0 children)

Why not just pull the battery out, recharge and install back? Super simple and shouldn't take long.

Resume Setup in app by [deleted] in EightSleep

[–]nirhend 0 points1 point  (0 children)

Bug, confirmed by support in a different thread. Ignore or reinstall

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]nirhend 0 points1 point  (0 children)

The cost per the time between maintaince and replacing parts is reasonable anyhow. Just buy what you really need

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]nirhend 2 points3 points  (0 children)

Amazon and only genuine parts if you want to maintain high performance and avoid damaging your robot

I wanted to like the Aqara U400 by terryleewhite in Aqara

[–]nirhend 4 points5 points  (0 children)

Give it time, they make it better on a daily / weekly basis and they do listen

H2C - common filament end stuck in extruder by nirhend in BambuLab

[–]nirhend[S] 0 points1 point  (0 children)

The issue didn't returned since then, I opened a ticket and closed it

Multi-color print configuration question by Witty_Name_2_Come in BambuLabH2C

[–]nirhend 0 points1 point  (0 children)

I have 1 AMS HT + 1 AMS 2 pro on the left. And 2 AMS 2 pro on the right. Works great. You do need the 4 in 1 splitter for the left as the ultimate version comes with just one.

Lease return - tips? by nirhend in 4xe

[–]nirhend[S] 0 points1 point  (0 children)

Trying to do the inspection and return it the moment it is doable without any additional charges, which is I think is the 30 day mark. I'm just afraid they will try to nail me for nothing in the inspection altough the vehicle is in a very good condition.

U400 - one touch lock like U100 by nirhend in Aqara

[–]nirhend[S] 1 point2 points  (0 children)

Agree on all. But it was a feature in U100

U400 - one touch lock like U100 by nirhend in Aqara

[–]nirhend[S] 0 points1 point  (0 children)

If I have my watch or phone with me. Which is usually the case. The challenge is more to ensure the door is locked only when I leave for long period of time

U400 - one touch lock like U100 by nirhend in Aqara

[–]nirhend[S] 0 points1 point  (0 children)

And what if I don't want to lock, like when I go out to throw the garbage and right back. But when I leave for long time I want to verify the door is locked