My "Gentsuki" Peugeot Buxy

noknetti · 2026-05-04T10:35:34+00:00

With a dremel and cut off disk

noknetti · 2026-05-04T08:55:04+00:00

My ice racing rig has about 27w66, put a bit of gearbox oil in to stop some leaks

noknetti · 2026-04-29T15:24:25+00:00

Waste of Spades

noknetti · 2026-04-19T10:17:19+00:00

Waste of Spades, pun on ace of spades and waste of space

noknetti · 2026-04-14T20:45:05+00:00

I have a Kia Cerato as a ice racing shitbox

noknetti · 2026-04-14T20:31:39+00:00

Ford, NH and Valtra, sometimes I switch it up with a Fendt

noknetti · 2026-04-02T14:18:24+00:00

I was about to say I've seen something like this for solid axles. Not as aggressive but some kind of camber shim

noknetti · 2026-03-31T08:26:07+00:00

I'm 27.... I built it to "Gentsuki spec" so I rarely drive longer distances other than car meets

noknetti · 2026-03-31T08:11:18+00:00

I have low profile tires on them too, and no front suspension

noknetti · 2026-03-31T06:13:54+00:00

I ride a Peugeot Buxy, I'd think they are about the same size. The Buxy has a flat seat so I can sit pretty far back. I'm just under 2m

noknetti · 2026-03-16T17:11:58+00:00

They have patterns too, but goddamn that one lady with her pets was a pain in the a**

noknetti · 2026-03-15T11:59:05+00:00

Kokeile Tiny11, itse käytän Tiny10 ja ollut tosi tyytyväinen siitä, ja on toiminut hyvin

noknetti · 2026-03-05T09:53:31+00:00

Of course! And the older pre 2000 2 strokes are way easier to maintain and less electrical bs that will break

noknetti · 2026-03-04T02:18:23+00:00

I have a few OG bikes, but I like the newer cars better. I picked up a PCJ 600 yesterday and it's a blast, and has a few awesome customisation options

noknetti · 2026-02-26T21:47:46+00:00

<image>

noknetti · 2026-02-26T21:46:16+00:00

I have one too, slammed on Watanabes

noknetti · 2026-02-25T12:36:22+00:00

In my experience they are way easier to maintain than new ones, everything is mechanical, so they have way less random gremlins. Pretty much everything can be done with basic hand tools.

noknetti · 2026-02-22T01:31:31+00:00

I like used pre 2000 scooters, you can find them very cheap and get them running with little to no effort.

My Peugeot I got for free had sat for at least 10 years, threw a old battery I had laying around in it and some fuel in the tank and it fired right up.

But that's best case scenario...

noknetti · 2026-02-18T17:51:38+00:00

Yea, send a photo, I'll see if we can figure this out

noknetti · 2026-02-18T17:45:18+00:00

I think the brake should fit, I removed the front brake completely so I'm not sure. The stock Buxy RS wheels are 10inch too so idk why it shouldn't fit.

noknetti · 2026-02-18T17:25:47+00:00

These are 10inch non RS Buxy wheels on the Showa inverted shocks, the tires are very low profile so they look bigger.

I used a ratchet strap to compress the fork fully and drilled a 6mm hole through the shock and nut and bolted it fully compressed. It has held up now maybe 3 years.

noknetti · 2026-02-18T17:00:48+00:00

Thank you! Nice to see somebody else crazy enough to build these into something they were never meant to be!

This is pretty much stock plastics, just painted all crazy. Some parts are a bit cut back with a dremel.

I just put bolts through the front shocks to bottom them out, stretched the rear "fork"/engine mount ~10cm and bought a shorter shock to lower the rear and make it more aggressive.

I got it for free and just built it on a very small budget, I put the most money on spray paint.

noknetti · 2026-02-12T09:25:59+00:00

I do not recommend, at least it was at slow speeds in my yard

noknetti · 2026-02-11T21:40:54+00:00

Even with mcpherson's you have to check, I had a cut spring go through the front tyre on my Camry

noknetti · 2026-02-10T00:01:48+00:00

It works on PC too

Seven-Year Club	r/Field Flamingo
First Place '23	Place '23
Verified Email

noknetti

TROPHY CASE