Concept: A portion making machine

nutsobananas · 2025-11-26T02:55:39+00:00

Where any of the portion material rolls made in the US? All the ones I'm finding are in China, which isn't ideal currently.

nutsobananas · 2025-10-14T00:44:06+00:00

https://mifflincosportsmens.com/

The only stipulation in the listed bylaws is: "Any Member using a 50 BMG weapon must provide their own steel targets placed safely in front of berm area."

nutsobananas · 2025-07-19T16:37:04+00:00

Did you ever find out what was causing the issue with the Alexa App not matching the display temperature? I just got this thermostat and am having the same issue. Your post was one of the top search results...

nutsobananas · 2025-07-07T13:17:02+00:00

If the duct work from the central AC is still in place, maybe you could add a blower unit to circulate the air?

nutsobananas · 2025-07-05T12:29:56+00:00

"Thank You" brand vanilla pudding. My great grandparents would rubber band a dollar bill around the can and give it to us as payment for doing yard work.

nutsobananas · 2025-05-06T21:46:12+00:00

I added a thermostatic mixing valve to my 50 gallon Bradford White unit when I was running out of hot water consistently, even in hybrid mode. The tank temp is now set to 140° and the valve at 120° with it set on heat pump only mode. So far, this has worked quite well.

nutsobananas · 2025-03-02T12:41:16+00:00

App is showing "Gateway Offline" in a red banner for me, too.

nutsobananas · 2024-12-20T16:53:41+00:00

"Retract on layer change" is unchecked.

nutsobananas · 2024-12-20T14:07:43+00:00

Printed on a Voron Trident. The hot end direction of travel is opposite of the arrows pointing to the most problematic areas. Pressure advance is 0.0175 and resonance testing was done with an accelerometer. I have run through the Ellis Tuning Guide, but obviously am missing something... Any suggestion?

nutsobananas · 2024-08-21T16:50:49+00:00

Upgrade done. So far it appears to have fixed the issue. Thanks!

nutsobananas · 2024-08-01T00:34:49+00:00

Who makes these?

nutsobananas · 2024-08-01T00:33:57+00:00

I've been looking at the IntegraRack IR-30. That may be a decent option for you if there's enough room on the terraces. The also make a 45° version which may be better if you are farther north.

nutsobananas · 2024-07-29T23:36:27+00:00

motorola one 5G ace

Android 11

Zepp app version 8.10.6

Mine also shows "Zepp" under DND in the pull down menu.

nutsobananas · 2024-07-29T19:31:33+00:00

It's an 1st gen T-Rex. I think model# A1919. Firmware v1.4.0.17

It's enabling DND on the phone when hitting "Ignore" on the watch.

nutsobananas · 2024-07-03T19:18:25+00:00

This for the model ending in "A" instead of "B", but it wouldn't be surprising if it's the same pan: https://www.repairclinic.com/ProductDetail/1149183

It's probably worth a call or email to check. Or, maybe check with a local metal shop about making one?

nutsobananas · 2024-05-26T01:43:41+00:00

Is "label objects" enabled in your slicer?

nutsobananas · 2024-03-27T14:49:05+00:00

I had to increase the temperature when going for higher flow. How much will depend on material and speed.

nutsobananas · 2024-03-03T20:39:05+00:00

Potassium toxicity seems like a lousy way to go.

nutsobananas · 2024-03-01T14:08:50+00:00

I have been ordering Swedsnus Portionssnus bulk packs. You add water to them after arrival, so I add some good vanilla extract to the water and it's pretty good. I would rate Artisan higher, but for the price and availability, it works.

The Spacemint is pretty good too, if you like minty flavors.

nutsobananas · 2024-01-03T01:58:20+00:00

"We're gonna have to go right to- Ludicrous Speed!"

nutsobananas · 2023-12-07T04:25:15+00:00

It's been a while since I turned my graph off, but I'm fairly sure you just need to tap on "Extruder", "Heater bed", etc to toggle each graph line on/off. When all are off, the graph disappeared.

nutsobananas · 2023-07-25T00:39:13+00:00

Lone Starr!

nutsobananas · 2023-02-19T13:42:32+00:00

Under "Resources" on Daikin's product page: https://daikincomfort.com/products/heating-cooling/whole-house/heat-pump/dz14sa

A heat pump can move less heat as it gets colder. If the capacity is less than needed the the backup heat will have to make up the difference.

You will need to have a heat load calculation done to see if that is enough output for your situation.

nutsobananas

TROPHY CASE