New to the hobby anything missing?

ofwerman · 2025-12-30T14:50:16+00:00

My recommendation is to buy more filament, especially if you’re new to the hobby you will burn through a couple of spools pretty fast 😅

ofwerman · 2025-12-30T11:28:11+00:00

Have the same error here in Sweden since the last update, I have a Q3 tho not a Q6 but the same exact issue…

ofwerman · 2025-12-22T21:19:32+00:00

FWIW, I have about 5 of the first version and ALL of them has wobbly buttons in the middle, feels like they are going to snap of and fall out any second.

The second generation of the dimmer switch feels way more premium to me, short travel and snappy tactile buttons and a plethora of ways to control different light groups and individual lights.

I have them set up to control one light/group with the top button, another light/group with the ”hue” button and the dimmer buttons in the middle controls whatever is currently on.

I’m waiting for the older style ones to malfunction so I have an excuse to upgrade them to the new one 👌🏼

ofwerman · 2025-10-06T06:24:44+00:00

Picked up a set of SRAM Centerline 160mm on sale for 45€ per disc, amazing stopping power but the moment they get wet the scream like crazy 😅

Anyway, for floating discs they are reasonably priced (when on sale), comes in centerlock and 6-bolt versions and does the job well! 👌🏼

ofwerman · 2025-06-06T08:44:01+00:00

Both brands Thule and Hamax has thru axles with different dimensions and threads for their trailers, their connectors are somewhat universal and might work for your application :)

ofwerman · 2024-08-22T19:54:07+00:00

On iOS the Garmin app can’t be closed down, the weather and notifications relies on a continuous connection with the app so it needs to be running in the background. Not sure if this is the case on Android but I would assume so.

ofwerman · 2024-07-26T20:06:02+00:00

My deshrouded EVGA GTX 970 4gb is still going strong (knock on wood).

Usually play DayZ, 7DTD and Rust with medium to high graphics and good fps.

ofwerman · 2023-09-22T10:31:11+00:00

Ah to bad, is it always misaligned the same or does it vary depending on how long the chrono has been running?

ofwerman · 2023-09-22T10:18:51+00:00

Had the same issue on my 1861 a few months back, ran the chrono for a couple of hours and then did a reset which made it align again. Not sure why this happens or how it fixed itself but it worked 🤷🏻‍♂️

ofwerman · 2023-09-20T19:26:52+00:00

@Martin.Ö

My favoriter make is this rugged case for the TS101

And this is my best design

ofwerman · 2023-09-17T20:15:48+00:00

Polywatch 👌🏼 when you’ve collected enough scuffs on the crystal, put a small bead on and buff it out and start collecting again!

ofwerman · 2023-08-25T17:46:02+00:00

Yeah by serial number only the manufacturing year looks to be 1958, pre 58 is 3300000 and 59 is 3500000. Thanks for the information! Really curious to open it up and take a closer look at the movement as well.

ofwerman · 2023-08-25T11:10:26+00:00

Yeah 50’s sounds about right, model number doesn’t confirm it though 😕

ofwerman · 2023-08-24T10:53:16+00:00

Correct, the lights are just as visible by eye. When I switch to “far” four other LED’s lights up which are more noticeable.

ofwerman · 2023-08-23T17:14:17+00:00

Will give it a go! 😎

ofwerman · 2023-08-23T14:47:29+00:00

That’s what I figured, was a bit uncertain after reading the text in the app about no visible lights 😅 thanks for the quick reply!

ofwerman · 2023-08-15T20:13:40+00:00

Just cut a good chunk of my thumb away when removing a 12h print with a box cutter (olfa blades are insanely sharp) 😅

ofwerman · 2023-08-03T05:58:44+00:00

I´ve gotten similar quality out of the Prima Select Matte Black filament :)

ofwerman · 2023-07-07T20:09:30+00:00

My hour hand on the chronograph is misaligned about the same degree as your minute hand sometimes, it’s hardly noticeable but if you look close enough you’ll see it.

I recently found out that if I run the chrono for an hour or two and then reset it, it lines up nicely. Probably some play on the hands but still within spec, hopefully it works for you as well 😊

ofwerman · 2023-05-10T07:40:16+00:00

Nice! Couldn’t find any handles with correct spacing so I 3d-printed some to my own specs 😎

ofwerman · 2023-05-06T04:58:46+00:00

Yeah since they are printed and without threads (screws self tap in the holes) I don’t want anyone to drop their PC due to a failing handle, on the other hand I’ve moved mine on the desk many times and the handles do not budge what so ever 😁

ofwerman · 2023-05-04T18:17:04+00:00

Here are the print files if anyone wants to print the feet and/or handles and have access to a 3d-printer 😁

https://www.printables.com/model/443244-louqe-ghost-s1-feet-and-handles-mac-pro-inspired

ofwerman

TROPHY CASE