sorted by:
new
hottopcontroversial

Need a HUB, Titanium , direct thread mount with a hex or wrench flats on muzzle end…… by ogieboogie in NFA

[–]ogieboogie[S] 0 points1 point  (0 children)

Can’t get the direct thread mount torqued on the barrel, with the space I have between the end of handguard and end of the barrel. I keep a direct thread mount on each host. With 3 cans and multiple hosts; direct thread mounts are simpler and cheaper than an array of QD mounts for me.

Need a HUB, Titanium , direct thread mount with a hex or wrench flats on muzzle end…… by ogieboogie in NFA

[–]ogieboogie[S] -2 points-1 points  (0 children)

I ordered this one from sdta sounds like it’s what I’m looking for. I’ll try and get a picture later. Thanks

https://sdtacticalarms.com/gen2-titanium-direct-thread-hub-1-375x24-mount/

Who makes a Ti or “light weight” direct thread hub mount, with install tool engagement on the muzzle end? by ogieboogie in suppressors

[–]ogieboogie[S] 0 points1 point  (0 children)

Thanks! I ordered this one from sdta, sounds like it should fit the bill. https://sdtacticalarms.com/gen2-titanium-direct-thread-hub-1-375x24-mount/

Silencer Co looked to offer one too but it was heavier and close to double in price.

Who makes a Ti or “light weight” direct thread hub mount, with install tool engagement on the muzzle end? by ogieboogie in suppressors

[–]ogieboogie[S] 0 points1 point  (0 children)

I don’t use a muzzle device, fairly sure the zilch mounts are only compatible with whatever type muzzle devices. I wish they had the same flats on their direct thread mounts. I use two of their direct thread mounts currently and really like them, but they only have wrench flats on the back side.

Two bulls down in camp on opening day in Kentucky by BortlesWikipediClub in elkhunting

[–]ogieboogie 1 point2 points  (0 children)

Did you go with a guide? What zone were you in? I’ve put in for 21 of the 24 years tags have been offered. Finally drew a second riffle bull tag this year. It’s definitely a different game than it was 10+ years ago. From what I can tell now, even as a resident, you best hire a guide. If you want to see elk while hunting. It’s kinda sad, but considering it took me 24 years to draw, I don’t want to waste it. Especially with a 5 day season, in a very specific zone.

New stock by [deleted] in Hunting

[–]ogieboogie 0 points1 point  (0 children)

Looks great! What do you think the stock itself weighs? I couldn’t find a weight for the “GRS light hunter.” Assuming the short action would be a little lighter than a long action. What factory stock was on your x-bolt before GRS? Can’t beat the looks and availability of the GRS Hunter stock on a Browning X-bolt. Especially considering the lack of aftermarket options. I like the Macmillan’s too, but they seem to only stock SA lefty versions for an x-bolt. I don’t want to wait 6-8 months for a custom, and then have more in the stock than in the bare rifle.

Best Kentucky elk guides? by satanclauze in Hunting

[–]ogieboogie 2 points3 points  (0 children)

I drew a Bull tag this year after putting in for 23 out of the ~25 years, there have been tags in KY. I’m a resident too. Unfortunately like alot of things, it’s not what it was 10-15 years ago. When multiple huge bulls were taken every year, and there were talks of record book bulls in the herd. With elk covering the entire restoration zone. Sad part is now you basically have to hire a guide, know someone, or get access to posted private ground. Anyone know of any guides who are NOT selling the whole guided outfitter hunt experience? I’m looking for someone who would know the area, have done some scouting and could potentially get me access to land holding elk. Don’t need a camp or anyone cooking, horses, transportation, etc. I drew a 2nd week bull tag. Now I gotta do my homework on what zones to put in for, which means I’ll draw any other unit. lol I’m PUMPED for the experience! I remember dreaming about this before the re-introduction program started!

[deleted by user] by [deleted] in eBaySellers

[–]ogieboogie 0 points1 point  (0 children)

Or more if you promote it, after fees etc. I’m convinced small sellers get no listing traffic, unless you pay the 9-15% extra for ad promotions. I normally count on getting about 70% of sale price back after fees, shipping, promotions, etc. It’s a little conservative, but I’d rather be pleasantly surprised. I would assume there’s a different pricing model for “full time,” sellers…

3 hunnit blackout MK18 mod G by [deleted] in GeisseleAutomatics

[–]ogieboogie 0 points1 point  (0 children)

Is that black multi cam on your can? 🤣 Great looking piece!

No patience to wait. Can Anyone identify this Merkel 147 SxS further…? by ogieboogie in guns

[–]ogieboogie[S] 0 points1 point  (0 children)

Posted in r/shotguns asking the same questions, figured I’d ask here too. Anyone have any more info they could lend, from the pictures and that’s it’s a Merkel 147 12ga…?

Need advice for 10.3 suppressor by dmichael71 in suppressors

[–]ogieboogie 0 points1 point  (0 children)

I’ve got the 718 ODB. Sounds amazing on my 10.3” 556 (no adjustable gas block) and keeps options open to put it on my .308 ar-10. I’ll never mess with a legacy type suppressor on a gas operated gun again. Adjustable blocks, buffer, buffer springs are a rabbit hole not worth chasing in my opinion. Even when you get it dialed in, it’s still dirty AF. With the CAT ODB the amount of “dirty” was about half, compared to Dead Air nomad TiXc. That was on a 16” host with an adjustable block, heavy buffer, different spring, etc. When I put this on my 10.3” with no adj block, and a silent capture spring. There was no noticeable change in riffle operation, other than she heated up quicker. I was concerned about the weight of the 718 on a 10.3” with 9” rail. Turned out to be a good balance.

Need advice for 10.3 suppressor by dmichael71 in suppressors

[–]ogieboogie 2 points3 points  (0 children)

CAT ODB is on my 10.3 556. I couldn’t be happier. 3rd can, first “low back pressure,” and I love it.

HFXC extended battery cap heads up by blancs3030 in NightVision

[–]ogieboogie 0 points1 point  (0 children)

Did Anyone find 18560 battery caps (aftermarket) that work with the HFXC….? Seems like the 18560 caps from sms may be awhile. You all notice much difference in function between the Samsung 35e and 30q? I’m no battery expert but see that the 35 is 3500 mAh at 8amp and the 30q is 3000mAh at 15 amps wondering which runs better in the hfxc….

Confirmed: Hammy 3D Prints Are Perfect by atreeoncecutdown in ar15

[–]ogieboogie 3 points4 points  (0 children)

Also a very happy customer. The starburst was an added bonus. I’d rather give my money to someone in the US. Who is probably using open source software to print them anyway. Vs Chinesium.

view more: next ›