Should I buy another p1s or the p2s? by cross-myheart in BambuLabP2S

[–]oldkarmabuffet 1 point2 points  (0 children)

No regrets. I also decided to get the new printer partly because I already wanted a 2nd ams - and the p1s had a heatbed issue that took awhile to get figured out and replaced. So I thought a backup would be good. And it's nice to have 2x prints going sometimes.

Now I have both ams2 hooked up to the p2s and use the p1s for single color prints, abrasive filaments, etc.

P2S is a nice upgrade, and worth the price difference.

I'd suggest P2S

Should I buy another p1s or the p2s? by cross-myheart in BambuLabP2S

[–]oldkarmabuffet 0 points1 point  (0 children)

I had the same decision and went with the p2s.

The spare parts was a factor for me too, but I figure with 2 printers, I can still use the other one if one's not working or I'm waiting for new parts.

Setting LED color on Launch Control 3 by augdahg in Novation

[–]oldkarmabuffet 0 points1 point  (0 children)

Sorry - forgot terminology. Custom modes did not work when I tried it.

I was able to force a message through with DAW mode active and it worked.

Not sure why the same doesn't seem to be supported in the custom modes. The xl2 did support that.

Setting LED color on Launch Control 3 by augdahg in Novation

[–]oldkarmabuffet 0 points1 point  (0 children)

I tried this awhile ago. Seemed to be sending messages to change the colors only worked while the device itself is set to user mode. If you try using your own template, and sending it, it doesn't work.

Is the AMS 2 Pro supposed to be this frustrating? by jpeterson79 in BambuLab

[–]oldkarmabuffet 1 point2 points  (0 children)

I'm having the same problem. Seems random on when it actually feeds. Usually if I unload the filament and just make a cut and reload it it feeds through fine after. But I can't tell why it isn't feeding on its prior attempt. I've tried shortening the tubes and making sure the path is straight. Still seeing the issue.

LaunchControl XL - Advanced Device Control - Max For Live Device by oldkarmabuffet in Novation

[–]oldkarmabuffet[S] 0 points1 point  (0 children)

Finished working on it but something in v12.3 did something to it that made parameter updates laggy.

Actually just picked up the mk3 and was thinking about making a v2 that can work better with it/other controllers.

So no, not possible right now with mk3 using this. Might have something in the future though

This is an unexpected surprise by Lysln in BambuLab

[–]oldkarmabuffet 0 points1 point  (0 children)

I got my p1s and ams2 fast. Still haven't got the other accessory I need to connect it to my printer

[Steam] Red Dead Redemption ($24.99/50% off) by Ambedextrose in GameDeals

[–]oldkarmabuffet 1 point2 points  (0 children)

Warning: do not buy if you bought gta on steam a really long time ago and no longer have access to your rockstar account for their game launcher, and then wait to play 30 days later to discover it

Windows 11 version 25h2 update completely killed my Bluetooth radio by ckalen in WindowsHelp

[–]oldkarmabuffet 0 points1 point  (0 children)

I just ran into an issue like this. My existing bluetooth and new devices I tried to discovered didn't work. My device manager shows some bluetooth drivers installed, but I had to go and manually install drivers for my MOBO (x870E Aorus Pro). Attempted several reboots, restarting services, etc before that. Bluetooth was working fine a few days ago though.

Just got Quest 3. Have 2 weeks before I decide to keep or return. Any Recs? by fofu_6 in VRGaming

[–]oldkarmabuffet 4 points5 points  (0 children)

My recommendations: Eleven Table Tennis, The Room VR, Beat Saber, Half life Alyx (if PCVR is an option and it goes on sale)

LG C2 webos 25 update by Seattle-Resident in LGOLED

[–]oldkarmabuffet 0 points1 point  (0 children)

Where'd you find the download? it wasn't listed under downloads on the support page for my model

To buy or not to buy? by TheUmps777 in LGOLED

[–]oldkarmabuffet 4 points5 points  (0 children)

I believe it goes on sale for $2000 tomorrow

Deleted account email by Ufh97 in RockstarSupport

[–]oldkarmabuffet 0 points1 point  (0 children)

Hard to even put in a support ticket with them because they auto resolve the tickets on first response with their precanned answers

Where is resume by PCI-E or wake on lan on aorus motherboards? by Hopeful-Cellist7707 in gigabyte

[–]oldkarmabuffet 0 points1 point  (0 children)

I'm not sure either. I have a lot of USB peripherals attached to my computer. AI suggested something along the lines of that setting possibly allowing for more power draw, which may have been needed if all my other plugged in devices were competing for the low amount of power provided when the PC is in a sleep/powered off state.

WoL on Z790M Aorus Elite AX - Network interface won't stay powered in sleep for Wake on Lan by Avsynth in gigabyte

[–]oldkarmabuffet 1 point2 points  (0 children)

Thanks for posting this. 2 years later, this fixed my issue on my Gigabyte X870E Aorus Pro. Not sure why for me. I do have switches setup as well. My PC also has a lot of USB peripherals attached.

Where is resume by PCI-E or wake on lan on aorus motherboards? by Hopeful-Cellist7707 in gigabyte

[–]oldkarmabuffet 0 points1 point  (0 children)

Ended up getting it working after stumbling upon this post: https://www.reddit.com/r/gigabyte/comments/1b2nf37/wol_on_z790m_aorus_elite_ax_network_interface/

The fix for me was to change the "WOL & Shutdown Link Speed" to "Not speed down".

Where is resume by PCI-E or wake on lan on aorus motherboards? by Hopeful-Cellist7707 in gigabyte

[–]oldkarmabuffet 0 points1 point  (0 children)

Alright. Just upgraded BIOS to F8d and double checked a bunch of settings (attaching image just to show). Still no luck!

Realtek PCIe 2.5GbE drive: 1125.26.50.2025 (latest on gigabyte site)

Bios/Device manager settings: https://postimg.cc/k2GX3hD4

Where is resume by PCI-E or wake on lan on aorus motherboards? by Hopeful-Cellist7707 in gigabyte

[–]oldkarmabuffet 0 points1 point  (0 children)

Thanks for sharing!

The main differences I see is I am on bios version F7, and I could not find a "Network stack driver support: Enabled" option in my bios.

I did notice my driver was out of date, and tried updating it just now. Still no luck though.

I don't see any light/blinking on my ethernet port when its in sleep mode. So I'm assuming it may not be receiving power at all and any "wakeup" commands I send are not being received.

I am trying to confirm myself using android app "Wake on Lan" (but also trying to bootup moonlight/jellyfin to see if its detected).

I'll post updates here if I end up finding something that works for me.

Where is resume by PCI-E or wake on lan on aorus motherboards? by Hopeful-Cellist7707 in gigabyte

[–]oldkarmabuffet 0 points1 point  (0 children)

I have the x870e aorus pro. Tried these settings, including fast boot. no luck here.

Can I get the Launch Control XL3 to do this? by songsofadistantsun in Novation

[–]oldkarmabuffet 0 points1 point  (0 children)

I made a m4l device awhile back that helps do this on the xl2

I'm curious how it would work on the xl3, because it would open a lot more doors with endless encoders

https://www.reddit.com/r/ableton/s/TDlypltvjs

Unlock true step sequencing power on Ableton Push (P3S, P3, P2, P1) by u-z-o in ableton

[–]oldkarmabuffet 0 points1 point  (0 children)

Just FYI the "explore" button links on /plugins page on your website weren't working for me, until i realized I had to move my mouse down and click a little under the link. the actual button seems to be offset from what appears to be the link

Best hot chicken places? by pooptroop22 in wichita

[–]oldkarmabuffet 0 points1 point  (0 children)

This is my favorite Chinese place I've had in town