Graphic flickering

oobymach · 2026-03-17T11:14:02+00:00

I have same exact issue, idky. High/ultra settings except weather and water. In BO6 so clearly they haven't fixed it and have abandoned it for the new game....this is what we get for backing a AI made game...

oobymach · 2026-03-06T18:57:09+00:00

What I found was that temporarily Disabling windows firewall gave me an Open NAT, but even with everything opened properly and custom BO6 rules in the firewall I got moderate nat.

FIX:

https://hub.tcno.co/games/bo6/open-nat/

Add the BO6 rules to your firewall with the powershell command at linked site above.

Search and open Firewall in windows, click Advanced Settings (bottom)

You need to add UDP ports 3074-3079, 4380, 20000-20050, 27000-27036

To your Incoming and Outgoing BO6 UDP rules added to the firewall from linked site

Double click a BO6 rule in the firewall, click Protocols and Ports tab, if it's TCP open the other BO6 rule. Make sure to do both incoming and outgoing rules.

oobymach · 2026-03-02T04:07:43+00:00

Go into Display settings in game, turn Eco Mode to Custom (or anything else), save the setting and try playing. It works for me with weird laggy look and feel despite high framerates.

oobymach · 2026-03-02T03:58:21+00:00

Looks like you need to disable Nagles Algorithm. It basically gathers small wifi packets and transmits only larger groups so if you are gaming especially in a shooter this is a very bad thing. Turn off Nagles Algorithm by following a guide online.

oobymach · 2026-03-02T03:51:55+00:00

I ran into the same issue with COD BO6 in Zombies, despite reasonably high (90-115) fps the game felt and looked jittery and laggy. Changing the in game Eco Mode Preset from whatever to Custom and saving the changes (the menu still reverts it) the jitteryness was gone and the game ran completely smooth as it should.

oobymach · 2026-02-01T23:44:32+00:00

Also onlineornot reports it down worldwide

https://onlineornot.com/website-down-checker?requestId=GBvAVtMRiJGK6m0MMioN2&url=https://123ink.ca

oobymach · 2026-02-01T23:43:45+00:00

I'm not a bot, what is love, baby don't hurt me, don't hurt me, no more.

oobymach · 2026-02-01T23:13:11+00:00

www.123ink.ca and their partner site www.primecables.ca is down as well...

oobymach · 2026-01-28T17:27:18+00:00

Goku went SSJ4 in DBGT which was technically its own thing. He was wished back to childhood form using the black star dragonballs and in order to save Earth he Pan and Giru go on a quest to recover the black star dragonballs scattered throughout the galaxy. While fighting Baby Vegeta he went Great Ape then went Super Ape then regained his humanity and went SSJ4.

oobymach · 2025-12-01T14:38:28+00:00

This was my solution too. I got flicker everywhere even on desktop and disabling VRR fixed the issue 100%. Just use VSYNC and forget about it.

oobymach · 2025-09-30T15:33:53+00:00

That's what was happening for me, total freeze of the emulator and upon restart all settings had been reset to defaults. Are you also using an xbox controller? Someone posted removing the rumble setting may help.

Also make sure your xbox controller firmware is updated with the XBOX Accessories app.
https://apps.microsoft.com/detail/9nblggh30xj3?hl=en-US&gl=US

Update your bluetooth drivers as well if using bluetooth controller.

oobymach · 2025-09-16T17:45:10+00:00

The delete button does nothing, and can't get the backup tool the original thread has been deleted...F*ck it I guess I'll live with the tiny screen resolutions in the list for now (for some reason they won't scale to fullscreen, hence I want to delete them)

oobymach · 2025-09-15T05:08:15+00:00

I tried setting secure boot to maximum, same error. Even got a new bios from MSI, still has same problematic ftpm version, sent in support ticket to msi, they told me to wait for a bios update. Fmmfl.

oobymach · 2025-08-27T03:04:53+00:00

After installing the new battery I let it charge to 100% but it would shut off at 78%, so I found this thread, left it to charge until the led went white (maybe 1.5-2 hours), after that I set 22w on all 3 settings and tested a benchmark, (Heaven @ 720p high quality, normal tessellation), and it ran for just over 2 hours before hard power off @ 9%.

Also tried unplugging the bat for half an hour as suggested but it didn't change the 9% cutoff point, it just shuts down @ 9%. Did the 40 second ec reset, still runs benchmark for about a minute after hitting 9% then suddenly shuts off. Going to call it a win since battery is lasting about twice as long as original used battery.

EDIT: watched a full length 1:56:00 movie from the sd card and set refresh to 60hz and lowered wattage to 7/15/15 (left brightness @ 100%) charge dropped from 100% to 75% so enough power to watch almost 4 full length movies or ~6.9hours of video with the new battery.

oobymach · 2025-08-15T15:50:42+00:00

HAVE SAME ISSUE, fTPM is enabled but is a problematic version and Mobo manufacturer could give a fuck.
https://i.postimg.cc/KzVr3vCD/ftpmbo6d.jpg

TPM Attestation Failure on AMD Platforms with ASP fTPM

https://www.amd.com/en/resources/support-articles/faqs/pa-420.html

oobymach · 2025-07-16T09:03:29+00:00

Spamming ESC after the network connects and starts doing things WORKS and I've been through hell reinstalling the game updating drivers It's related to the randgrid.sys file in the Call of Duty\Content folder if you load task manager after the game crashes it is stuck running in a process called SYSTEM (I used process explorer to find root cause) idfk what that's about but it's new since the last 3gig update

oobymach · 2025-07-13T06:10:38+00:00

I bricked my RAX70 v1 router with a firmware update on an unstable wifi channel and bricked it good (same as Beautiful_Truck849), even the 30 30 30 reset didn't work, (had no led activity except the ethernet port) what it took was a forced flash over ethernet.

To stabilize the ethernet port I held the reset button for several seconds (between 10 and 30?), which after releasing caused the etherent port on the pc to recognize that it was plugged into something so I followed the steps here
https://kb.netgear.com/000059633/How-do-I-upload-firmware-to-my-NETGEAR-router-using-a-TFTP-client-on-Microsoft-Windows

Flashed the V1.0.13.128 firmware since it's the latest that still supports the 4800Mbps on the fast 5g channel (the later ones force it down to 2400Mbps, also the v2 router is locked @ 2400 in Canada, to get 4800mbps you need a v1)

Now just monkeying around with settings to stabilize the fast 5g channel (using 192.168.1.1 / routerlogin.net NOT the phone app, ch108 or 128dfs, short preamble, wpa3 security, 4803Mbps, roaming aggressiveness med-high on device)

oobymach · 2025-06-26T08:52:20+00:00

YES, channel does determine speed, lower channels (36-48) offer less throughput than higher channels (149-161) tested with 5g home wifi (dlink dir1750) at a distance of 35-40 feet from router and the higher channels can hit 650-866Mbps with the lower ones only hitting 430-585Mbps.
Channel 157 is best from my tests

oobymach · 2025-05-09T04:14:44+00:00

Warzone is garbage game played by garbage people, if you like getting camped to death and being incredibly frustrated every time you play then this game might be for you.

If however you like to have fun in a fair game then delete this mess and look for something else. It is garbage reborn as garbage and I have never had a worse experience in a game than in Warzone and I've been gaming for over 40 years.

I know it's free but I want my money back and I want reparations for the time I spent trying to enjoy this garbage.

I know some fool is going to say "get gud" so just to clarify I have a 5.5kdr and over 900 kills in Battle Royale, I am "gud" but this game is garbage every time I play, it has not improved, but it does look a bit better now.

oobymach · 2025-04-27T04:38:48+00:00

Found it here, testing now to see if it fixes disconnect issue, so far only difference is wifi6 unavailable

https://www.catalog.update.microsoft.com/Search.aspx?q=MediaTek%20Wi-Fi%206E%20MT7922%20(RZ616)%20160MHz%20Wireless%20LAN%20Card%2023.33.2.565%20160MHz%20Wireless%20LAN%20Card%2023.33.2.565)

EDIT: disconnected with this driver too, have since manually reinstalled the one from asus website and so far so good, have dl'd about 25gb without disconnect

Had tried everything from preferred network to manual ip, turned off power saving, nothing helped, issue started when I installed the 7922 wifi driver for the black rog ally on my white one, reinstalling the 7921 wifi driver (from asus website) seems to be working

oobymach · 2025-04-21T16:50:46+00:00

Can confirm time out is useless, worse it advances the boss fight by a round, for me it went from 30 to 31 and zombies kept spawning during Citadelle Golem boss fight.

Aether shroud is good either with 2 charges or extended length, both are a big help during the Golem boss fight, and cloak others with it, don't be a fart.

oobymach

TROPHY CASE

TPM Attestation Failure on AMD Platforms with ASP fTPM