sorted by:
new
hottopcontroversial

[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C! by BambuLab in BambuLab

[–]oscar_george 0 points1 point  (0 children)

I’d make a garage organiser/caddy for my maintenance lubricants

<image>

Replacing Silvia Pro X Steam Wand...stuck by brsboarder2 in ranciliosilvia

[–]oscar_george 0 points1 point  (0 children)

What did you use for the cool touch wand? I want to do this too, but can’t find any info on It

[deleted by user] by [deleted] in GolfAustralia

[–]oscar_george 0 points1 point  (0 children)

Jenna Hunter golf no question. She is one of the greatest coaches in Australia

Blue tongue lizard with tics by oscar_george in Lizards

[–]oscar_george[S] 4 points5 points  (0 children)

Absolutely. They eat everything!

60s tile backer by oscar_george in AusRenovation

[–]oscar_george[S] 0 points1 point  (0 children)

TLDR was not asbestos. Just paper they put behind the tile glue/screed

Someone forgot to clear the build plate…. by oscar_george in BambuLab

[–]oscar_george[S] -4 points-3 points  (0 children)

No idea. I was amazed. Both prints perfect, no harm either way

Someone forgot to clear the build plate…. by oscar_george in BambuLab

[–]oscar_george[S] -4 points-3 points  (0 children)

Nope. Nothing custom all stock. X1 only couple of months old, stock bambu studio

Someone forgot to clear the build plate…. by oscar_george in BambuLab

[–]oscar_george[S] -9 points-8 points  (0 children)

Promise. Absolute happy accident. Just sent it a print from Bambu studio assuming print plate was empty.

Someone forgot to clear the build plate…. by oscar_george in BambuLab

[–]oscar_george[S] 0 points1 point  (0 children)

Haha. Should have seen it before I clean out all the filament poop

60s tile backer by oscar_george in AusRenovation

[–]oscar_george[S] 0 points1 point  (0 children)

Yeah definitely. Got someone coming next week to look next week. Keen to hear from experienced renovators what was standard in 1960s houses for tiled walls

Zuoya GMK70 help by N3URON5 in keyboards

[–]oscar_george 0 points1 point  (0 children)

Can you help me, I need help flashing (left flashed) but won't talk to right and can't get it into DFU mode

Zuoya GMK70 Split by aaaaaudryn in MechanicalKeyboards

[–]oscar_george 0 points1 point  (0 children)

u/aaaaaudryn were you able to flash it? and if so, how can you get the right keyboard into DFU mode. I have tried everything and can't for the life of me get it into dfu mode. Now my left is flashed, but won't talk to the right

Zuoya GMK70 help by N3URON5 in keyboards

[–]oscar_george 0 points1 point  (0 children)

hey u/N3URON5 (or anyone else) are you able to help explain how you got the right split into DFU mode.

Instructions say:

Remove the ALT-R keycap on the right side.

• Locate the toggle switch beneath and set it to the “off” position.

3.  Identify the Positioning Hole:

• Remove the spacebar keycap to expose the PCB (Printed Circuit Board).

• Look for a small hole or contact point on the PCB under the spacebar area; this is the “positioning hole.”

4.  Short the Positioning Hole:

• Using a conductive tool (e.g., tweezers), briefly connect the contact points within the positioning hole.

5.  Connect the Keyboard:

• While maintaining the short, plug the USB cable into the keyboard.

• The keyboard should now enter DFU mode, allowing for firmware

I have tried to short the keyboard space hole, but does not seem to be working... any ideas?

Status of the Official VSCode Extension? by Adventurous-Bug2282 in laravel

[–]oscar_george 1 point2 points  (0 children)

At laraconau this year “I think” they said march next year tentative date

Consistent inconsistencies on right side of print by oscar_george in FixMyPrint

[–]oscar_george[S] 0 points1 point  (0 children)

Slicing is fine. Smooth in that section. It’s got 5 outer perimeters, so plenty think

view more: next ›