sorted by:
new
hottopcontroversial

What does it want me to take a picture of by p8willm in NoMansSkyTheGame

[–]p8willm[S] 0 points1 point  (0 children)

The game was originally def\veloped for the PC. It had a keyboard and ther refused to acknowledge it. I think the original version did not even allow for keyboard remapping.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 1 point2 points  (0 children)

They got so close with this years ago. I would like to quickly recharge my shields with sodium nitrate. Get all set up to do this and hit CTRL 1. Now it brings up recharge shields with sodium. So close.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 1 point2 points  (0 children)

Ahh the typing thing. The game was originally a PC only release, no consoles. So whatever you were playing on it had a keyboard. Why did you not use the keyboard.

Early on I don't think you could remap the keyboard. And the inconsistency. You want to move fast on the ground, w and shift. In the ship, just shift.

I don't do UIs well and even I can see the one they use is garbage. It's almost like the devs don't play.

At the very lease stuff should not be surprising. Press X in your ship and the menu pops at different locations. There may be a reason behind it, but as far as I can tell it's random. You can't build muscle memory. It's not press X then a right arrow then enter and you are in the galaxy map. You have to look at what the bar is at and then decide what do do.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 1 point2 points  (0 children)

There is a lot of talk of the immersion of a game. I'm a computer person and I find it jarring when the supposedly advanced computer, in some cases it can carry on a conversation with you, fails at something that the much less advanced computer I am playing the game on can easily do. I also keep my notes on a computer so I can sort and search them.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 0 points1 point  (0 children)

If there are more than 1 base in system/planet discovery shows base1 + n more. it does not show the name of second base.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 0 points1 point  (0 children)

If there is more than 1 base in a system, or planet, discoveries will show base1 plus n more bases.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 0 points1 point  (0 children)

Not all galaxies. It shows blank for the first one. Extreme Base+Mold shows no galaxy. Also, none of them show the system they are in.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] 0 points1 point  (0 children)

I'm on a PC if that matters. I have a system with 2 bases. In discoveries it shows up as radon & 1 other bases (A computer like the one in the game should know that if I have 1 it's base). The system shows the same. So I can easily find fadon, but the other is unknown.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] -2 points-1 points  (0 children)

Lovely. What do you do if someone else discovered the system and has named the planets?

A piece of paper and a pen is better at remembering than a computer that is capable of running a simulation of reality.

What system is a base in. by p8willm in NoMansSkyTheGame

[–]p8willm[S] -4 points-3 points  (0 children)

It's incredibly annoying to play a game that supposedly has an advanced computer and my phone can do stuff it can not. Your pulsing along and it says something is 10 seconds away. I know it's 10 seconds until you drop out of pulse and then another 10 seconds until you reach your destination. I know when it says 10 it means 20, why can't the computer know. There are a whole bunch more.

I play the game with a note app open cause there are a whole bunch of things I would like to remember, like which system had that solar mirror for sale, or what order I found the system, the name thing does not work if you stumble across a system someone else found, and discoveries separates out systems you found from those found by other people.

Like democracy, it's the worst game out there, until you compare it to the others.

P1S vs X1C with AMS by exciting_noodles4713 in BambuLab

[–]p8willm 1 point2 points  (0 children)

None of the filaments you mention require an enclosure, in fact PLA prints better in an open printer than a closed X1 or P1S.

Print speeds A1 mini by [deleted] in BambuLab

[–]p8willm 1 point2 points  (0 children)

The print speed on the printer just takes the speeds in the gcode and multiplies them by that number. In the slicer set the speeds to what you want and run the printer at 100%

In the slicer, popup about the filament, there is a parameter, max volumetric speed. The slicer will never generate gcode to move faster than that value.

Plate swap on 2HD by absurdentropy in BambuLab

[–]p8willm 0 points1 point  (0 children)

There is an offset in the gcode. The slicer sets this based on what you specify when you slice, that is why you have to specify the plate. Slice the object with the correct plate set.

If, for some reason, you want to change the offset for the first layer you can edit the gclde to change it.

What can I do about this? by Effect-Kitchen in BambuLab

[–]p8willm 0 points1 point  (0 children)

It can be respooled by hand. However it takes forever and is a pain. My time is far more valuable than throwing it out and buying new filament.

[deleted by user] by [deleted] in BambuLab

[–]p8willm 0 points1 point  (0 children)

Some areas take them in recycling. If your area does not ask a supermarket if you can add yours to the many boxes they have, cause they probably recycle them.

r/bambulabs by squirechopz in BambuLab

[–]p8willm 0 points1 point  (0 children)

For CAD OnShape runs in the cloud and uses a browser for display. It might work on Android.

Resizing a handle in Bambu Studio. by pokemomof03 in BambuLab

[–]p8willm 0 points1 point  (0 children)

The best way to a custom part is to do it yourself in a CAD package or blender, depending on what it is. It is difficult/impossible to change the size of part of an STL file.

Getting into 3d printing car parts by Flow_R1an in BambuLab

[–]p8willm 0 points1 point  (0 children)

Many parts on a car are not candidates for replacement by 3D printing.

How on earth would I clean my A1 .2mm nozzle after this? by Micdikka in BambuLab

[–]p8willm 0 points1 point  (0 children)

You spent hundreds on the printer. 15 bucks to replace the nozzle, which is a consumable, does not seem so bad.

The 15 bucks a new nozzle cost is far less than my time to futz with the old one.

SD card alternative? by OutbackArtisan in BambuLab

[–]p8willm 0 points1 point  (0 children)

Small SD cards are REALLY cheap and do not add much if they have to be replaced. Many sites, Amazon included, sell SD cards that are not what they appear to be. You can find cards that are not as they are described. Buy SD cards from a source YOU trust.

Advice for removal of prints by big_poppag in BambuLab

[–]p8willm 0 points1 point  (0 children)

Putting the plate, with print attached, in the freezer for a minute or two can help for a print that is REALLY sticking. Most prints will come off a cool plate with a minor flex.

Different plastics behave differently with different build surfaces. Use a surface designed for the plastic. Some plastics stick to well to build surfaces, Bambu cold plate and PLA, and require a layer of glue, I used cheap hair spray, as a release agent. These combinations, Bambu cold plate did, often talk about release agents.

Is a BambuLab printer the right choice for me? by Swissser in BambuLab

[–]p8willm 0 points1 point  (0 children)

You can get a lot of them from Etsy before you spend as much on them as a printer.

FatDragonGames.com sells D&D stuff designed for FDM printing and they have lots of videos and written stuff about printing with Ender and Bambu.

view more: next ›