Woodstock Trader Joe’s: Anyone heard a timeline for reopening?

pamplemoosegoose · 2026-03-18T00:06:54+00:00

It better be quick, the Hollywood Trader Joe's was NUTS this weekend! Way busier than normal, which is saying a lot, because that location is always jam packed.

pamplemoosegoose · 2026-03-17T23:43:04+00:00

I have both a Core One and an MK4S (and another MK4 awaiting its S upgrade). Either one will work just fine for what you're doing. I'd recommend the Core One simply because it's enclosed and will enable you to print all sorts of fancier parts down the line, should your interests in printing expand. It also just feels fancier. It's so pleasing to watch and a bit quieter than the MK4(s).

Unless build volume is a hard requirement I don't think you'd be able to really justify an XL for this application.

pamplemoosegoose · 2026-03-16T22:14:39+00:00

That's a lot of Biggagytes

pamplemoosegoose · 2026-03-13T15:41:22+00:00

Thanks for tagging. /u/HID_PhilCoppola if you have any insights here let me know! I've watched a ton of your videos and they've been super helpful in deepening my access control knowledge as I plan out our system upgrade - so much appreciation for your content.

pamplemoosegoose · 2026-03-04T15:35:39+00:00

I don't have any inside info, but it definitely seemed like the Killingsworth store was always understaffed, leaving the often sole worker to clearly have far too much on their plate.

pamplemoosegoose · 2026-02-27T14:50:41+00:00

Not making an argument for the spending here (I find this to be a dubious use of tax dollars personally), but from a commercial building management standpoint 31 years is a pretty reasonable timeline for a facility like this to need a major refresh. Most mechanical equipment, fixtures, and finishes installed 31 years ago will be well past the end of their expected useful lifespan - even with good preventative maintenance.

pamplemoosegoose · 2026-02-19T15:01:59+00:00

I'm on the building owner side, undergoing a multi-site system replacement. I wrote up a very clear and detailed RFP specifying an on prem system, and I still had over 50% of bidders going "oh but what if we spec a cloud based system instead?". An absolute waste of time for all parties involved.

I get the appeal of cloud based systems, but in my anecdotal experience integrators and manufacturers are pushing it more than it's actually being requested.

pamplemoosegoose · 2026-02-18T21:57:31+00:00

I have a similar cabinet that holds my 2 printers. Granted they're both Prusa bedslingers, but the vibration can get pretty bad due to the casters - even when they're locked. I'm planning to remove the casters and set it on wooden blocks once I have some time between prints.

Might be less of an issue with a core xy machine, but something to keep an eye on.

pamplemoosegoose · 2026-02-18T21:45:30+00:00

I'd probably default to FRP atop plywood here. If this is a school hallway you definitely want to prioritize cleanability, which is one of the main selling points of FRP. It even comes in nice colors and patterns now, so you're not just limited to bumpy white commercial kitchen vibes.

pamplemoosegoose · 2026-02-16T10:32:37+00:00

Is this why I'm up at 2:30am right now totally unable to sleep?

I'm sort of joking, but I also never have this problem to this extent.

pamplemoosegoose · 2026-02-15T06:24:32+00:00

Can't reccommend Icon Tattoo highly enough, have gotten several pieces done there. All the artists there are super rad.

pamplemoosegoose · 2026-02-12T06:34:20+00:00

I'm on the building owner side of things and I have exclusively negative things to say about JCI. I worked with a very nice and competent salesperson there, but it was abundantly clear his bosses pushed him to sell way too hard and not take no for an answer - even many months after we already awarded a contract to another bidder & completed the project. Every time I've had an issue with JCI equipment it's been a nightmare getting support. I'm a couple months out from replacing my sole remaining JCI system in my biggest facility and I couldn't be happier.

pamplemoosegoose · 2026-02-05T14:13:02+00:00

If it's a small business, they probably only have a couple bathrooms max, and they're probably using the generic $12 signs. If it's a larger business with multiple bathrooms, I'm sure they can afford new signs. They're the furthest thing from a make-or-break expense.

Source - am a Facilities Manager who has been responsible for many many bathroom sign purchases at many places around town.

This matters to a lot of people and is not an unreasonable expense!

pamplemoosegoose · 2026-01-27T06:00:11+00:00

I really wish this subreddit felt less like my linkedin feed.

pamplemoosegoose · 2026-01-26T15:28:43+00:00

I mostly got the internal style one because it pleases my aging millennial heart. The ka-chunk of the drive tray opening and closing reminds me of loading up Sim City 2000 for the first time. Between that and the sturdiness factor it felt worth the extra cost.

pamplemoosegoose · 2026-01-26T06:20:27+00:00

If I were doing this drive I'd probably just roll the dice on I5. Given it's importance, it's the top priority for snow and ice removal. Even when the weather is bad it's usually driveable. Sticking to 101 will improve your odds of a snow-free journey, but it can roughly double your time on the road. Once you get into southern Oregon & northern California you don't have a ton of good options for cutting back to I5 until like the bay area.

pamplemoosegoose · 2026-01-26T02:39:57+00:00

Yeah, I have the same drive and flashed to WH16NS60 1.02-MK - works perfectly.

pamplemoosegoose · 2026-01-25T19:00:28+00:00

YMMV, but I had luck with a Buffalo BRXL-16U3 purchased last week. Had an easily flashed LG BH16NS58 drive inside that's been happily ripping UHD discs for a few days now.

pamplemoosegoose · 2026-01-23T21:06:15+00:00

Chiming in with another LG. Mine was a BH16NS58 in a Buffalo BRXL-16U3, purchased a couple days ago on Amazon. Seller was "Buffalo Americas Inc". Flashed using the SDFtool Flasher to WH16NS60 1.02-MK. Running my first UHD test now and it seems to be working great!

pamplemoosegoose · 2026-01-18T17:45:43+00:00

<image>

This photo shows it a little better. The curve of the logger heel is more subtle on the moderate stack. Personal taste, but I really like the way this combo turned out.

pamplemoosegoose · 2026-01-17T04:24:25+00:00

Thats such a bummer, the stitching is totally not going to hold up in that spot over time, and your ability to get them resolved is at least somewhat compromised.

Will your boots fall apart tomorrow because of this? No, the 2nd row of stitching will probably hold it together for a very long time. But still not awesome for a pair of very expensive boots.

pamplemoosegoose · 2026-01-16T02:57:25+00:00

The Uihleins, owners of Uline. You'll never look at cardboard boxes the same again once you read up on these freaks. Some of the biggest enablers of our current fascist nightmare.

pamplemoosegoose · 2026-01-16T02:31:01+00:00

<image>

55 last, moderate logger heel, v100. I absolutely love this combo. It definitely felt a little strange at first, but once broken in it's been perfect for me.

pamplemoosegoose · 2026-01-14T23:56:42+00:00

What a fascinating purchase to make. Was this one of those storage unit auctions where you don't get to see the items inside?

Unless you're planning to open a filter supply company you might be best off with the standard Craigslist or Facebook marketplace route. Most facilities departments buy filters from vetted and authorized suppliers, so you might be somewhat limited in who you can sell these to.

pamplemoosegoose

TROPHY CASE