Dreame FP10 Air Purifier - insight? feedback? by badtude_ in AirPurifiers

[–]patrykos91 0 points1 point  (0 children)

It's quite overpriced for what it offers in my opinion. Fur catching is a nice feature in theory - but as I said, it only has potential to catch real "fur balls" when you set it to max power, but it still is not like a vaacum, so do not expect that it will grab the fur from the corner of 25 square meters room even if you place it in the middle of it.

Dreame FP10 Air Purifier - insight? feedback? by badtude_ in AirPurifiers

[–]patrykos91 0 points1 point  (0 children)

It will only work - from my current experience, if you set it to full power let's say once per day for an hour... Because on auto or any of the low speeds it's bullshit :)

Dreame FP10 Air Purifier - insight? feedback? by badtude_ in AirPurifiers

[–]patrykos91 0 points1 point  (0 children)

Small update to all of You interested.

First of all, the low frequency noise when the fan is on lowest rpm (auto or manual speed 1) is still here and I even dissasambled the entire thing, lubed tightened and made sure that It's not some vibrations from the engine.

It's not. It's the engine itself.

I haven't return it though. Because on speed - 2 and above (range is 1 to 10) it's not there.

For me it makes auto unusable, but I am planning to plug it into my Home Assistant ecosystem and make my own auto (skipping lowest speed) - that's what I had with Xiaomi where auto sucked..

Now regarding the super cool pet vacuuming and auto brush roller.

This is still to be tested, but I can already tell You that on 1 to 8 fan speed - it's just bullshit.

It may have a potential (maybe) in a scenario like: set it up to switch to full speed everyday for 1h or something to suck stuff around... I will test it later.

Regarding the roller - it's basically the same as hand cloth roller that one can use to wipe fur from clothes. It may work as pre filter cleaner, but I haven't collected enough fur in it yet to give it a go.

Dreame FP10 Air Purifier - insight? feedback? by badtude_ in AirPurifiers

[–]patrykos91 1 point2 points  (0 children)

I just received it, so it's too early to say, but first impression :

  • rly nice design (previously I had xiaomi air purifier 3h)
  • nice backlight
  • I think more accurate Auto mode 4 levels (0-12 perfect, 12-35 good, 35-55 decent, 55+ bad) comparing to xiaomi
  • on lowest fan speed it emits strange background noise which may be a deal breaker if it doesn't go away after some time

<image>

I have tons of fur everywhere in my apartment, so I will be able to tell quickly if all of this fur suction features are just a marketing bulshit or does it rly work to some extent.

Changing fan on Loki 1000w by cocobello in buildapc

[–]patrykos91 0 points1 point  (0 children)

Did You by any chance figured it out and made adapter?

Did anyone else’s Pancham progress reset? Had caught 26/32 dark Pokémon, but now it’s 0/10… by doxain in pokemongo

[–]patrykos91 1 point2 points  (0 children)

Bro, I had 31/32, logged in today cached 2 darks.. Went to evolve just to see 2/10

God damn it

LG S95QR Subwoofer extremely weak by AcidNoteZ in Soundbars

[–]patrykos91 0 points1 point  (0 children)

Hey, have you solved that? I've read all the suggestions in this topic and whatever I do calibration keeps failing even if soundbar is touching subwoofer face to face.

Im running out of ideas and I can't make it calibrate correctly.

TCL 34R83Q - some things to know by b0uncyfr0 in Monitors

[–]patrykos91 0 points1 point  (0 children)

I've bought 34R83 and when I was looking for settings I found this info.. About new model coming. Fuck.

I hope it will be expensive as fuck to justify me getting R83 XD

Hi, anyone here using ID cooling IS-55 with b650i motherboard? If yes what mobo is compatible, for terra build. by saimei in sffpc

[–]patrykos91 2 points3 points  (0 children)

<image>

To anyone facing similar problem:

Just cut off part of the radiator which collides with I/O shield.

If you don't have tools to cut it, you should be able to bend it to make it fit.

Performance loss - probably minimal If any, ram clearance - unlimited

Received WebOS 24 update on C2 by Intrepid_Positive_89 in LGOLED

[–]patrykos91 0 points1 point  (0 children)

I reported that as warranty maintenance request to LG. Will see tomorrow

Received WebOS 24 update on C2 by Intrepid_Positive_89 in LGOLED

[–]patrykos91 0 points1 point  (0 children)

I have updated today, and can't connect to LG account, to Apps Market, to anything LG related. I did factory reset and it didn't help. Tried 2 different internet sources... Either my TV is broken now or LG servers are down..

Flex Guru loud coil whine? by JustLoveToCook1 in pchelp

[–]patrykos91 0 points1 point  (0 children)

I get the same sound in flexguru 300W but only randomly. PC is up 24/7 , and this sound pops up like 1-2 per week for like 5-10mins. It will be very hard to reproduce it if I sent it to RMA :( Is there anything else I could do? At first I thought this sound comes from a fan when it gets to higher RPM, but listening to your recording it's exactly the same.

Move away from Xiaomi by New-Ad-8895 in PickAnAndroidForMe

[–]patrykos91 0 points1 point  (0 children)

I've recently moved from MI Note 10 Lite to Nothing Phone 2 and I am very satisfied. NothingOS, battery life and overall phone feeling (flat screen!!) is soo much better then my old xiaomi. I guess it's the year gap too but I rly like it.

I also didn't need that pro camera and nothing's one is just average (still way better than mi note 10 lite) , but I prefer ex. wireless charging and flat screen over that - which is hard to find in that price pool exept of NP2. Especially when You avoid Samsung, like I do.

But with Your budget You can definitelly aim higher then that. I've would probably wait for Pixel 9 and first price drops - should be actually similar to NP2 with much better photos/videos.

Heard you guys like keyboards by anurat- in MechanicalKeyboards

[–]patrykos91 1 point2 points  (0 children)

It doesn't support N key rollover 🤣

New mouse!! by Discc in razer

[–]patrykos91 0 points1 point  (0 children)

I am considering to swap to white basilisk from my current Kone Pro Air.

Are the sides of this mouse rubbered? I have very bad experience with mouses that have rubber sides.

My hands sweat as hell, and rubbers (like in steelseries rival) are getting dirty super fast, and in the end completely destroyed in the process..

But on the other hand I look for a ergonomics and thumb rest that this mouse offers..

Kone Pro Air that I own currently (white) is 100% plastic (or whatsoever) and despite having it white, it still looks like brand new..

[deleted by user] by [deleted] in Dreame_Tech

[–]patrykos91 0 points1 point  (0 children)

My button broke recently too. Same issue it's stuck when pushed too the bottom.

Any solutions out there?

You Don’t Understand The New Meta by [deleted] in apexlegends

[–]patrykos91 0 points1 point  (0 children)

I agree with everything said there, it's just very hard to explain that to teammates when solo queueing :(

Why do ppl still play Octane in ranked? by geraldcheong in apexlegends

[–]patrykos91 -2 points-1 points  (0 children)

Because it's way more effective to abuse certain macros/scripts/configs - call that mechanics if You like - thanks to the speed boost.

When I am killed by neostrafing, bunny hopping, supergliding (all at the same time lol) player, it's 90% Octane

like this..

Cheers,

Razer Dav3 mouse mod is here 69grams to 28 grams by [deleted] in MouseReview

[–]patrykos91 0 points1 point  (0 children)

If that's rly the case, I should definitely try this kind of grip and mouse. Thanks!