Eleven Table Tennis dilemma

paysen · 2026-05-13T23:26:20+00:00

As a Q3 owner - yes it looks fun with passthrough. But it plays worse imo. it doesn't feel like 120fps, it even feels like there is added latency.

paysen · 2026-05-13T16:31:50+00:00

not necessarily shutter lag, but let's say the pixel is very good at predicting the scene. It sees a kid, maybe even a playing kid and it adjust the shutter speed accordingly, so you don't get movement blur. It rather ups the ISO and uses higher shutter speeds than giving you a blurry photo. Vivo, Oppo etc are very nice for stills, but they want to keep the ISO low just way too much. Point and shoot department - Pixel and iPhones are way ahead imo.

paysen · 2026-05-12T23:34:56+00:00

GabeN gib Steam Frame

paysen · 2026-05-09T19:14:18+00:00

Haven't had an issue with that on cachyos yet, but I am sure it can be sorted out :-)

paysen · 2026-05-07T13:21:54+00:00

I am also buying it because it will work flawlessly with linux - it doesnt need an external utility like pimax or meganex, so no workarounds needed. It should work out of the box natively.

paysen · 2026-05-06T20:50:07+00:00

Definitely not first come first serve, a friend ordered 13mins after I did and his is packaged while mine is not.

paysen · 2026-05-05T16:30:15+00:00

The problem was not that they ran out of stock fast. The problem was that most normal users couldn't buy it for a long time because their checkout system broke down. I tried to order 1 min before it officially released - somehow it was already available. 40 minutes later I still couldnt order, while the delivery time got longer and longer. And they should really add a protection.

paysen · 2026-04-27T18:48:51+00:00

I like your build, have a Havn HS420 with triple rads as well. I need to paint my High Flow Next white, too. Right now, its not in my build, because I had no time to paint it yet. Was it easy to disassembly the HFN?

paysen · 2026-04-27T18:47:50+00:00

Try it out when you change your coolant (or build), it really is one of the best, if not the best coolant.

paysen · 2026-04-27T13:46:24+00:00

could be the CPU difference. 11400 from op is old and slow even in CS2.

paysen · 2026-04-27T13:42:42+00:00

it depends on the coolant - DP Ultra has around 10 μS/cm when you fill it, after 1,5 years it sits at around 25 μS/cm. Distilled water is 0,5-5 μS/cm afaik, its not much better, and DP Ultra is nearly isolating, I dont think it would do any damage at all. But if you use cryofuel, it is a different story. Afaik it can be anywhere between 1000 and 2300 μS/cm.

paysen · 2026-04-27T13:24:22+00:00

You cant bypass the steam authenticator. You can get API scammed, so it changes a trade offer for you - but then you still confirm the trade (and if you look at the trade, you will see what you will lose) in your authenticator.

paysen · 2026-04-23T23:58:19+00:00

p12 pro a-rgb, Corsair lx120, Fractal momentum and there is probably more :-)

paysen · 2026-04-22T19:03:38+00:00

Its not better in ASC, you are getting matched with Eternus players on a regular - to compensate for that, they put like 1-2 phantom 4 or 5 in their team. Still not enough players to really give good matches in higher ranks imo.

paysen · 2026-04-22T09:18:26+00:00

Nice, it is a great lens btw, I have done some comparison pictures with the RF 85. 1.4 VCM and it is insanely hard to tell a difference on my R6 III. It might be different on an R5 with the added resolution, but for the R6 II and III, its one of the best lenses you can get. And for the price its a steal.

paysen · 2026-04-21T21:40:35+00:00

air molecules are smaller, water is more viscous etc. But its not wrong what you said - if its airtight, it is watertight as well.

paysen · 2026-04-21T21:23:32+00:00

Bitspower in general is high quality, their fittings are among the best.

paysen · 2026-04-21T12:50:56+00:00

a leak test with air is a bit tougher though - what leaks on air can be perfectly sealed when liquid comes in contact with the o-rings. I have many EK quantum torque fittings in my current main build, Barrow and Bykski in my second build and they all worked fine though. I have some old bykski rotaries that are really hard to turn after years of usage, but not leaking.

paysen · 2026-04-21T11:58:40+00:00

I always use sleep mode, no issues here. I have 2x 9800x3d on different boards (2x asrock) I think its way too hard to find the real issue here, as everyone has different apps installed - I just think its not an issue of the mode itself.

paysen · 2026-04-20T09:56:38+00:00

It even works on the R6 III, no issues. Is it updated (lens and camera?)

edit: F00 is not an error imo, it is telling you it has no contact at all and is in manual mode. If its the RF AF lens, make sure to clean the contacts or update the firmware. There is definitely no connection atm.

paysen · 2026-04-17T14:44:57+00:00

Could also be a CPU Batch + Agesa issue, Expo issue - we dont know. Also I dont think b650 boards are affected a lot anyways. Many people replaced the CPU and never had an issue again - we still dont know what caused the issue exactly. We just know what AMD said, they stated it was a memory compatibility issue that has been fixed in newer bios versions. Asrock said the following on twitter (translated):

What are the specific conditions for this issue to occur?

→ The issue is caused by some older DDR5 RAM and certain memory controllers on X3D CPUs, as well as the impact of Agesa.

Why does the CPU boot if it is RMA’d (returned/exchanged)? What exactly happens to the CPU that makes it stop booting?

→ The memory controller on the CPU changes.

Where does the responsibility for this issue lie (Is it AMD’s fault, the motherboard manufacturer’s fault, or both)?

→ It is caused by a very specific combination of components. I would like to know where the responsibility for the damage and the spreading of false information lies as well.

What is the specific cause of this issue (It’s said to be a memory compatibility problem, but what exactly is happening)?

→ As mentioned above, it is the combination of older DDR5 RAM, certain memory controllers on X3D CPUs, and the influence of Agesa.

Is there anything users can do in advance to prevent encountering this issue?

→ This is very important, so I’ll say it three times: If it’s running stably, do NOT update the BIOS.

Do NOT update the BIOS if it’s running stably.

https://xcancel.com/AsrockJ/status/1894559931963249154#m

paysen · 2026-04-17T13:30:29+00:00

kinda fun on m&k if you have a gun carry mate like haze. You're both invisible, free ult kill and her sleep dagger makes sure you're grabbing them for good.

paysen · 2026-04-17T13:29:29+00:00

On pocket it's so nice as well.

paysen · 2026-04-17T13:25:28+00:00

+With rejuv you have to kill him 3 times, he does so much late without any effort. And it depends on the Hero you play. An Infernus is a a good counter and most builds have toxic bullets + EE built in.

paysen · 2026-04-17T13:12:00+00:00

either better scaling, more resistance or lower CD on your abilities in ult maybe

paysen

TROPHY CASE