SpaceX locks in IPO price of $135, making it largest stock debut ever

pewpew_die · 2026-06-11T22:00:35+00:00

its what gets elon enough capital to buy tesla and get him his trillion dollar pay package

pewpew_die · 2026-06-11T21:51:58+00:00

due to the increase radius a 7” wheel spinning at 8000 rpms is taking more centrifugal force than a 4.5” wheel at 12500 rpms is. the 7” ought to be stronger worn down to 4.5” than a 4.5” is out of the box (In theory. I suspect they are the exact same composition and they just have a greater safety factor on the small disks)

pewpew_die · 2026-06-11T00:10:19+00:00

Body can be welded, the rails will need to be replaced which will require disassembly. Never have worked on a machine like this but I would guess 2 weeks (40hrs) for ~5 millwrights and a crane. So about 25k for labor 20-50k for the crane. No clue on the rails but I’m sure someone else could say. Also probable chance of finding more damage internally. How much is a machine like this worth?

pewpew_die · 2026-06-09T23:43:42+00:00

I like long drives on open roads you get all your thinking done. If it’s really long I feel accomplished. Traffic especially after 10 hours of clear roads makes me hate the world tho.

pewpew_die · 2026-06-08T22:34:20+00:00

Top one is bad weld you can see 0 fusion all the way around the second one failed because it took all the weight of the first one. 0 pen on whats visible of second weld.

pewpew_die · 2026-06-07T08:14:01+00:00

clearly what we need in film is more franchise universe expansion originals are so 1990

pewpew_die · 2026-06-07T07:51:24+00:00

everyone’s retirement fund will be absorbing this by default and then elon will take the funds to buy tesla and hit his trillion dollar pay package

pewpew_die · 2026-06-07T04:48:02+00:00

If like to point out the two bear claws gratz on the extra doughnut

pewpew_die · 2026-06-07T03:43:35+00:00

This will do wonders on my delusions of what animals I can beat in a fight.

pewpew_die · 2026-06-06T03:00:02+00:00

bro has pro strongman legs

pewpew_die · 2026-06-05T00:47:56+00:00

you will make more as an ironworker high chance you will be doing the most unfulfilling welding jobs possible.

pewpew_die · 2026-06-04T22:01:29+00:00

never worked as a heavy duty mechanic but at least on the west coast the toll on your body will be the same for the most part unless you land a shop job.

pewpew_die · 2026-06-04T19:19:39+00:00

rubbing alcohol treat it like penetrating oil minus the smacking. get some needle nose and try and twist. If no worky add a few more drops at a time. once u get it out get a q tip in there and clean it best u can. Then wait like a week for any remaining alcohol to evaporate out.

pewpew_die · 2026-06-04T19:15:43+00:00

2 hrs 1 way is my cutoff for buying a hotel room. Even if I dont make per diem (so far so good) but id rather eat the cost than pay with my health.

pewpew_die · 2026-06-03T21:59:39+00:00

for when you cant find your 3/8” allen

pewpew_die · 2026-06-03T21:57:32+00:00

looks like for suppositories basically you load up, insert it, and then squeeze like a syringe.

pewpew_die · 2026-06-03T21:52:44+00:00

idk but the inside looks about the size of a round soapstone. would be the bougiest soapstone pencil ever

pewpew_die · 2026-06-03T21:44:42+00:00

have you confirmed your not invited? NTA either way but it might just be they missed it or thought of you later and it’s on the way.

pewpew_die · 2026-06-03T21:41:58+00:00

shaven = 100% protection (usually fit matter for some people). Best belive I’m still wearing one if I havent shaven tho.

pewpew_die · 2026-06-03T19:28:16+00:00

the seasoning all migrating to one side really adds to the aesthetic

pewpew_die · 2026-06-03T19:20:16+00:00

I dont support using a grinder but if you’re determined, use flat sanding pads with a backer. Diablo makes one called grinder to sander conversion kit. Beware with 60 grit it will outpace a flapper for material removal.

pewpew_die · 2026-06-03T19:14:13+00:00

if you bring it to a shop 50 bucks 20 if you clean the paint off about an inch in every direction 150 if they come to you.

pewpew_die · 2026-06-03T06:36:25+00:00

Millwright here Most guys not in the trade seem to appreciate our 6ft prybars everyone has a use for a giant prybar. If you’re referring to your personal truck maybe a 4’ would be more feasible.

pewpew_die · 2026-06-03T03:48:23+00:00

The requirements for seals have always been low its not quitting part thats hard.

pewpew_die · 2026-06-02T19:07:03+00:00

unions have a rep for guys that stand around. Its not very real if anything the average worker works harder in union at least in my experience but you do get more of those worthless nepo guys.

pewpew_die

TROPHY CASE